Investigation of the infrared characteristics of the rocket nozzle

Investigation of the infrared characteristics of a rocket nozzle is very important for the study of infrared initiating technology. The Narrow-Band Zone model is developed for that purpose. The spectral transmission and absorption factors are introduced, and the equations between radiative heat flux and the temperature of waill surfaces and gas are developed. The radiative heat transfer in one axisymmetric cylindrical enclosure filled with homogeneous radiative participating medium is computed with the Narrow-Band Zone model and compared with those in the reference documents. The comparison shows good agreement. The radiative heat transfer to the nozzle of one rocket engine is also calculated with the Narrow-Band Zone model, and the outgoing radiative energy flux and energy rate integrated in a mid-wave infrared band 2-6 pm, a long-wave infrared band 8-14 pm and the full wave band are analyzed. The following conclusions can be derived: the spectral radiation from the inlet and outlet of the nozzle show apparent spectral discontinuity, which appears greater in the 2.7-2.95 pm than in the neighboring wave band. The spectral outgoing radiative energy flux of nozzle wail is similar to that of gray body, which decreases with wavelength in 2-14 pm. The outgoing radiative energy flux on the nozzle wall is greater in the cylindrical and contracting section of nozzle, but smaller in the divergent section, which is determined by temperature. The nozzle of the rocket engine radiates most energy in the mid-wave surfaces by absorption. The most important feature of gas radiation is the strong selection of the waveband, so the detailed study of the infrared characteristics of nozzle of the rocket engine should be carried out on narrow-band computation.     

气囊式无人机缓冲系统的着陆侧翻现象

文章研究无人机气囊缓冲系统的着陆侧翻问题。首先,建立了无人机着陆冲击动力学模型,通过仿真分析技术对无人机的典型着陆过程进行模拟,发现该型无人机在着陆过程中存在机身侧翻的现象,有可能对机翼产生不利影响;随后,引入翼尖触地速度作为指标对侧翻程度进行评估,研究了翼尖触地速度与侧向着陆速度之间的关系;针对该无人机着陆过程中产生的翻滚问题,综合翼尖触地速度计算结果,提出了减缓翻滚现象的途径;最后,通过仿真分析对所提出的解决方案进行评价。研究结果表明,文章提出的减缓无人机着陆翻滚问题解决方案可靠合理。     

结构误差对旋转稳定弹丸气动特性影响的数值模拟

基于剪切应力传输(SST)k-ω湍流模型,对考虑结构误差情况下的弹箭模型进行数值模拟计算。首先采用CFD和工程经验公式相结合的方法,得到了不同马赫数、不同转速情况下无结构误差模型的多种气动特性参数。通过与实验数据对比,阻力、法向力、俯仰力矩、压心位置误差在10%以内,验证了该方法的可行性和准确性。然后,建立了考虑结构误差即质量分布不对称、弹体不同轴和无结构误差模型,并分别进行了气动特性模拟计算。结果表明,质量偏心对滚转阻尼力矩系数、马格努斯力矩系数影响很大;弹体不同轴对法向力系数导数、俯仰力矩系数导数、马格努斯力矩系数导数和压心位置都产生很大影响。结构误差使模型的多种气动特性参数产生很大变化,将影响其飞行弹道和稳定性。     

A theoretical model of semi-elliptic surface crack growth

A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman–Raju formula is developed. The crack is regarded as a sharp notch with a small curvature radius and the process zone is assumed to be the size of cyclic plastic zone. The modified Hutchinson, Rice and Rosengren(HRR) formulations are used in the presented study. Assuming that the shape of surface crack front is controlled by two critical points: the deepest point and the surface point.The theoretical model is applied to semi-elliptic surface cracked Al 7075-T6 alloy plate under cyclic loading, and five different initial crack shapes are discussed in present study. Good agreement between experimental and theoretical results is obtained.     

一种折叠弹翼悬挂物的分离轨迹试验技术

提出了一种新的折叠弹翼悬挂物机弹分离轨迹试验技术,重点解决了在机弹分离过程中折叠弹翼动态展开时悬挂物的气动力获取问题。研究表明,提出的试验技术通过将悬挂物气动力修正方法引入到悬挂物分离安全性研究当中,准确地得到悬挂物的分离特性,解决了折叠弹翼悬挂物分离轨迹风洞试验技术瓶颈,为折叠弹翼悬挂物的投放分离安全性提供一套工程实用的解决方案。     

精密电阻自动考核筛选装置的研制

介绍一种智能型的精密电阻自动考核筛选装置，解决了考核筛选精密电阻时繁重的重复性劳动，并保证了电阻测量的准确性，该装置还可应用于筛选考核稳压块等具有温度系数的器件。     

BP神经网络理论在模型修正的应用

神经网络由于其本身具有的优越性，已广泛应用于各个领域中的分类、联想问题。将神经网络理论用于对利用有限元分析方法得到的系统模型进行修正，从计算结果看，该方法收敛速度快且收敛到全局最优解。     

大力发展技术市场 迎接知识经济挑战

扼要介绍了知识经济的概念及我国技术市场的状况；分析了技术市场对发展知识经济的重要作用，并就发展和培育技术市场、促进技术创新，提出了建议。     

NUMERICAL STUDY OF TWO INTERFACE METHODS FOR COMPRESSIBLE MULTI-FLUID FLOWS

INTRODUCTIONThe direct numerical simulation of com-pressible multi- fluid flows is an important re-search topic with various key applications.Therelatively dominant difficulty of simulation lies intreatment of the moving material interface. Ingeneral,there are two basic approaches to treatcontact discontinuities.The first,front trackingmethod[1,2 ] ,explicitly characterize the interfacemotion by the motion of individual points on theinterface. The other approach is front capturingmethod[3…     

拟压缩性方法数值模拟绕弹体的不可压缩层流脱体涡流动

本文应用在连续生方程中增加压力对时间导数项的拟压缩性方法，数值求解三维定常不可压缩Ｎａｖｉｅｒ－Ｓｔｏｋｅｓ方程。数值求解过程采用隐式的Ｂｅａｍ－Ｗａｒｍｉｎｇ近似因式分解格式。计算绕尖头旋成柱体的大迎角脱体涡流动，得到与实验相符的结果。