一种基于RS码的宽间隔跳频序列生成方法

针对目前基于RS码生成的非重复跳频序列周期较短、序列复杂度较低、工程实用性不强等缺点,提出一种改进的RS码宽间隔跳频序列生成方法。使用长周期的RS码,采用非线性转移矩阵法将其转换为跳频序列,再用对偶频带法对其进行宽间隔处理。性能仿真结果表明,与以往的方法相比,改进的跳频序列在增加了序列复杂度的情况下,仍具有良好的均匀性、随机性和汉明相关性,且实现较简单,工程实用性较强。     

基于不同数控系统的固定轴加工手动编程方法

根据多年的数控加工编程经验,给出了多轴加工中常用的固定轴加工方法的重要性和广阔的应用前景,并对固定轴加工进行了准确定义,阐述了固定轴加工的原理,结合实例介绍了三种常用数控系统中涉及的固定轴加工高级编程指令的编程方法。     

一种新型多模式高速存储器

随着图像采集精度的提高和立体成像的需求,图像数据速率和总量呈几何级数增长,促进了高码率大容量存储的需求。提出一种新的高速存储器方案,通过改变FLASH类型和存储数据处理方式提高数据存储速率,以适应采集图像高精度和高速率的要求。     

A Structured Mesh Euler and Interactive Boundary Layer Method for Wing/Body Configurations

To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. For the turbulent boundary-layer, an integral method using Green＇s lag equation is coupled with the outer inviscid flow. A blowing velocity approach is used to simulate the displacement effects of the boundary layer. To predict the aerodynamic drag, it is developed a numerical technique called far-field method that is based on the momentum theorem, in which the total drag is divided into three component drags, i.e. viscous, induced and wave-formed. Consequently, it can provide more physical insight into the drag sources than the often-used surface integral technique. The drag decomposition can be achieved with help of the second law of thermodynamics, which implies that entropy increases and total pressure decreases only across shock wave along a streamline of an inviscid non-isentropic flow. This method has been applied to the DLR-F4 wing/body configuration showing results in good agreement with the wind tunnel data.     

Determination of optimal samples for robot calibration based on error similarity

Industrial robots are used for automatic drilling and riveting.The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly,and can be improved through error compensation to meet aircraft assembly requirements.The achievable accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points.Therefore,based on the error similarity error compensation method,a method for choosing sampling points on a uniform grid is proposed.A simulation is conducted to analyze the influence of the sample point locations on error compensation.In addition,the grid steps of the sampling points are optimized using a statistical analysis method.The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot.The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid.After error compensation,the position accuracy of the robot meets the position accuracy requirements.     

典型再入返回器气动特性对比与改进研究

返回器气动特性研究对宇宙飞船的研制起着先导和制约作用。文章对Apollo、CEV和类Soyuz这3种典型的轴对称钝头体再入返回器气动布局进行了气动特性的对比分析,发现与Apollo、CEV相比,类Soyuz外形的升阻比偏小,无法满足以第二宇宙速度载人空间再入返回的要求。在此基础上研究了几何参数（包括倒锥角和球冠半径）变化对类Soyuz外形返回器气动性能的影响规律,从中得到类Soyuz外形的改进方向,提出了一种以类Soyuz外形为基础的改进设计外形,并对该外形的升阻特性、稳定性和配平特性等相关气动特性进行了分析。研究表明通过对几何外形参数的调整优化来提高类Soyuz外形的升阻比,从而达到以第二宇宙速度再入返回的升阻比要求,这样的技术途径是可行的。     

JPEG有损压缩图像保留格式加密研究

本文针对JPEG格式有损压缩图像加解密过程中图像数据损失较大的问题,提出了基于码流方式的保留格式加解密算法,并对JPEG图像加密算法的处理效果、效率及安全性进行了测试。通过实验发现,本文算法能够获得较好的JPEG有损压缩图像的保留格式加密效果。     

基于左手材料的翼面隐身结构设计及优化

翼面隐身结构能同时满足飞行器机翼气动、结构和隐身的要求,但在空间有限的机翼中应用时,由于结构特点使其隐身效果受到限制。为了解决该问题,在传统隐身结构中加入左手材料(LHM)进行改进。首先选取一种典型的LHM,从隐身设计角度出发,利用其雷达散射截面(RCS)计算不同入射角度下的后向吸收率,对其电磁特性进行研究。然后根据LHM的电磁特性,将其应用于翼面隐身结构,在相同的RCS减缩效果下,应用LHM可有效降低隐身结构体积。最后,为了进一步提高隐身效果,提出一种夹芯型LHM翼面隐身结构,并对该隐身结构中的结构参数利用代理模型进行优化。研究结果表明,相较金属翼面段RCS降低了15dB以上,较相同结构的翼面隐身结构RCS降低了10dB以上。     

A closed-form solution for moving source localization using LBI changing rate of phase difference only

Due to the deficiencies in the conventional multiple-receiver localization systems based on direction of arrival(DOA) such as system complexity of interferometer or array and amplitude/phase unbalance between multiple receiving channels and constraint on antenna configuration,a new radiated source localization method using the changing rate of phase difference(CRPD)measured by a long baseline interferometer(LBI) only is studied. To solve the strictly nonlinear problem, a two-stage closed-form solution is proposed. In the first stage, the DOA and its changing rate are estimated from the CRPD of each observer by the pseudolinear least square(PLS) method,and then in the second stage, the source position and velocity are found by another PLS minimization. The bias of the algorithm caused by the correlation between the measurement matrix and the noise in the second stage is analyzed. To reduce this bias, an instrumental variable(IV) method is derived. A weighted IV estimator is given in order to reduce the estimation variance. The proposed method does not need any initial guess and the computation is small. The Cramer–Rao lower bound(CRLB) and mean square error(MSE) are also analyzed. Simulation results show that the proposed method can be close to the CRLB with moderate Gaussian measurement noise.