进口水平投影可控的流线追踪内收缩进气道设计

为了满足两侧进气布局飞行器的乘波前体与进气道一体化设计要求,提出了一种进口水平投影可控的流线追踪内收缩进气道设计方法。基于马赫数分布可控的轴对称基准流场,在指定进口水平投影为椭圆的条件下,采用该方法设计了内收缩进气道并在设计点(Ma=5.4)和接力点(Ma=4.0)对其进行数值研究。结果表明,设计点时进气道都能保持基准流场的波系结构和沿程压力分布,无粘时可以全捕获自由来流,喉道性能与基准流场几乎相等。有粘条件下,设计点和接力点时进气道具有较高的压缩效率和良好的流量捕获能力,接力点的流量系数高达0.85。该设计方法为内收缩进气道与乘波前体的一体化设计提供了新途径。     

An Improved Nonlinear Dynamic Inversion Method for Altitude and Attitude Control of Nano Quad-Rotors under Persistent Uncertainties

Nonlinear dynamic inversion(NDI)has been applied to the control law design of quad-rotors mainly thanks to its good robustness and simplicity of parameter tuning.However,the weakness of relying on accurate model greatly restrains its application on quad-rotors,especially nano quad-rotors(NQRs).NQRs are easy to be influenced by uncertainties such as model uncertainties(mainly from complicated aerodynamic interferences,strong coupling in roll-pitch-yaw channels and inaccurate aerodynamic prediction of rotors)and external uncertainties(mainly from winds or gusts),particularly persistent ones.Therefore,developing accurate model for altitude and attitude control of NQRs is difficult.To solve this problem,in this paper,an improved nonlinear dynamic inversion(INDI)method is developed,which can reject the above-mentioned uncertainties by estimating them and then counteracting in real time using linear extended state observer(LESO).Comparison with the traditional NDI(TNDI)method was carried out numerically,and the results show that,in coping with persistent uncertainties,the INDI-based method presents significant superiority.     

ABORT-like detector to combat active deceptive jamming in a network of LFM radars

This paper studies an electronic counter-counter measures (ECCM) scheme combating against deceptive electronic counter measure (ECM) techniques.An adaptive detector exploiting generalized likelihood ratio test (GRLT) criterion is applied to detect the presence of deceptive jamming in fractional Fourier transform (FrFT) domain.First,the generating mechanism of spurious frequencies is analyzed based on the Volterra serial.The proposed nonlinear distortion model based on power amplifier behavior is robust in distortion analysis when the memory effect is considered.Second,a modified adaptive beamformer orthogonal rejection test (ABORT) like detector in closed form is built.The proposed detector can discriminate the echo and deceptive jamming adaptively by exploiting primary data and secondary data.This ECCM scheme is capable of guaranteeing the performance without the restriction of orthogonality,which is essential for the ABORT detectors.The expansion to radar network is discussed as a special case at the final part of this paper.Numerical simulations demonstrate the effectiveness of the proposed method.     

俯仰姿态保持模式下飞机结冰边界保护方法

在研究飞机结冰机翼和平尾失速机理的基础上,以飞机迎角作为关键参数,飞机俯仰指令作为指令参数,提出一种基于飞机自驾仪的结冰后边界保护方法.通过引入铰链力矩检测模块,提前告警飞机失速,为边界保护提供了裕度.建立飞机纵向动力学方程,针对俯仰姿态保持（PAH）模式下机翼失速进行了仿真计算.结果表明:结冰条件下,通过铰链力矩的检测,飞机能在失速迎角为2°之前,进入边界保护模式,增加飞行安全的裕度.通过控制指令的限制,自动驾驶模式下飞机迎角能保持在失速迎角之内.      

深冷组合循环发动机吸气模态循环分析与设计可行域研究

为了研究类似SABRE3结构的深冷组合循环发动机,建立了基于部件法的发动机设计点热力学计算模型,提出了发动机氦循环新的循环效率和循环特征参数的定义。考虑发动机参数的物理限制条件及不同工质循环之间的相互影响,求解得到了空气路、氦气路重要参数的设计可行域。在可行域内开展了空气路和氦气路的循环分析,获到了冷却当量比、性能参数等主要参数的分布结果。结果表明:此发动机空气热功转换比ηt2为0.02～0.746。氦循环设计可行域受ηt2及换热器热负荷限制;循环起始温度和热负荷限制确定的情况下,ηt2越低氦循环可行域越窄。降低发动机冷却当量比的关键是:提高换热器1的氦出口温度以降低氦流量;当换热器1和换热器2的氦出口温度同时取得最大值时,冷却当量比取得最小值。换热器1和2的氦出口温度分别取1200K和1300K时,空气路可行域内冷却当量比为0.917～2.64。     

大型飞机迎角保护控制律设计及试飞技术研究

针对大型飞机迎角保护控制律设计及试飞问题,通过杆位移-过载梯度的实时精确调整及取大值逻辑指令切换,设计了迎角保护控制律,实现拉杆到底飞机迎角达到且不超过限制迎角的目的。根据迎角保护控制律的功能及试飞目的,将整个试飞过程分为三个阶段,研究了各个阶段的试飞技术。仿真结果表明,所设计的控制律能够实现迎角保护功能,具有良好的控制效果。     

基于任务场景分析的机载导航页面人机界面设计过程研究

顶层飞行任务场景是民机机载显示系统需求捕获的重要来源,显示系统的人机界面设计通过自顶向 下的飞行任务场景分析,识别显示信息内容,开展信息内容设计,继而开展样式设计、交互行为设计与接口设 计等工作。本文以导航页面为例,综合运用层次任务分析和场景用例分析法,阐述了机载显示系统人机界面的 设计约束和过程,可为民机机载显示系统人机界面的正向设计过程提供借鉴。 [ 关键词] 机载显示系统;导航页面;任务场景;人机界面设计