Investigation of thermosolutally caused convection during -growth of BiSbTe3-mixed crystals at normal and reduced gravity

BiSbTe₃-mixed crystals have been grown at normal and reduced gravity (during the MIR'97-mission) using a -configuration of the TITUS facility. The distribution of the components in the melt, and so the homogeneity of the growing crystal, is strongly influenced by the flow in the melt even in the case of weak convection. The flow configuration in the melt especially in front of the solid-liquid phase boundary can be investigated by means of a segregation analysis of the system components and an additional Pb-dopant. The BiSbTe₃-system is because of its hydro-dynamic properties a typical representative of semiconductor melts (low number, high number) but there are also some special properties relating to the segregationally caused enrichment of the lighter tellurium at the phase boundary and the resulting solutal destabilities. Experimental experiences from segregation analysis have shown that the mass transport in the melt at normal gravity is mainly influenced by convective mixing determined by thermally and solutally caused buoyancy forces. Numerical simulations have been performed for the real experimentally used configurations. These simulations have shown that a strong coupling of thermal and solutal effects exists and have given axial as well as radial segregation profiles being in excellent agreement with the experimental results for the vertical normal gravity grown crystals. For micro gravity conditions a reduction of the flow velocity of more than two orders of magnitude (depending on the micro gravity level and the direction of the residual acceleration) resulting in diffusion controlled component segregation has been predicted.The results of the two micro gravity grown crystals, especially the axial and radial segregation profiles as a sensitive indicator for the flow configuration in front of the phase boundary will be given and discussed in the paper. They will be compared with the results of numerical simulations of the melt flow for the real processing parameters measured during the TITUS growth processes and with experimental as well as numerical results for vertical normal gravity grown reference Samples.     

固化过程可视化:采用集成的超声传感器监测交联反应过程

在工艺过程中,树脂的反应程度或固化度通常因为其不会导致可见的缺陷,所以常被忽视.然而,未完全固化的产品会对最终的力学性能产生很大的影响,在使用过程中伴随有较大温度变化的情况下尤其如此.     

Simultaneous determination of aerosol- and surface characteristics from top-of-atmosphere reflectance using MERIS on board of ENVISAT

The determination of aerosol optical thickness (AOT) from nadir scanning multi-spectral radiometers, like SeaWiFS, MERIS or MODIS, requires the separation of spectral atmospheric and surface properties. Since SeaWiFS and MERIS do not provide information at 2.1 μm, like MODIS, the estimation of the surface reflectance cannot be made by the cross correlation approach described by Kaufman et al., 1997. The BAER approach (Bremen AErosol Retrieval), von Hoyningen-Huene et al., 2003, uses a linear mixing model of spectra for ‘green vegetation’ and ‘bare soil’, tuned by the NDVI, determining an apparent surface to enable this separation of aerosol and surface properties from VIS and NIR channels. Thus AOT can be derived over a wide range of land surfaces for wavelengths <0.67 μm. Using MERIS L1 data over Europe, the AOT retrieved is comparable with ground-based observations, provided by AERONET. Regional variation of AOT can be observed, showing the atmospheric variability for clear sky conditions by: large scale variation of aerosol turbidity, regional pollution, urban regions, effects of contrails and cases of aerosol-cloud interaction. Simultaneously with the spectral AOT also spectral surface reflectance is obtained, where all atmospheric influences have been considered (molecules, aerosols and absorbing gases (O₃)) for channels with wavelengths <0.67 μm. The AOT is extrapolated by Angström power law to NIR channels and the atmospheric correction for land surface properties is performed, enabling the further investigation of land use and spectral land properties.     

Adaptive Phased-Array Tracking in ECM using Negative Information

Target tracking with adaptive phased-array radars in the presence of standoff jamming presents both challenges and opportunities to the track filter designer. A measurement likelihood function is derived for this situation which accounts for the effect of both positive and negative contact information. This likelihood function is approximated a? a weighted sum of Gaussian terms consisting of both positive and negative weights, accounting for the positive and negative contact information. Additionally, recent theoretical results have been reported which have derived an accurate measurement error covariance in the vicinity of the jammer when adaptive beamforming is used by the radar to null the effects of the jammer. We compare the impact of using a likelihood function that accounts for negative contact information and the corrected measurement error covariance by comparing five Kalman filter-based trackers in five different scenarios. We show that only those track filters which use both the negative contact information and the corrected measurement error covariance are effective in maintaining track on a maneuvering target as it passes through the jamming region. This approach can also be generalized to any target tracking problem where the sensor response is anisotropic.     

Advanced data acquisition system for SEVAN

Huge magnetic clouds of plasma emitted by the Sun dominate intense geomagnetic storm occurrences and simultaneously they are correlated with variations of spectra of particles and nuclei in the interplanetary space, ranging from subtermal solar wind ions till GeV energy galactic cosmic rays. For a reliable and fast forecast of Space Weather world-wide networks of particle detectors are operated at different latitudes, longitudes, and altitudes. Based on a new type of hybrid particle detector developed in the context of the International Heliophysical Year (IHY 2007) at Aragats Space Environmental Center (ASEC) we start to prepare hardware and software for the first sites of Space Environmental Viewing and Analysis Network (SEVAN). In the paper the architecture of the newly developed data acquisition system for SEVAN is presented. We plan to run the SEVAN network under one-and-the-same data acquisition system, enabling fast integration of data for on-line analysis of Solar Flare Events. An Advanced Data Acquisition System (ADAS) is designed as a distributed network of uniform components connected by Web Services. Its main component is Unified Readout and Control Server (URCS) which controls the underlying electronics by means of detector specific drivers and makes a preliminary analysis of the on-line data. The lower level components of URCS are implemented in C and a fast binary representation is used for the data exchange with electronics. However, after preprocessing, the data are converted to a self-describing hybrid XML/Binary format. To achieve better reliability all URCS are running on embedded computers without disk and fans to avoid the limited lifetime of moving mechanical parts. The data storage is carried out by means of high performance servers working in parallel to provide data security. These servers are periodically inquiring the data from all URCS and storing it in a MySQL database. The implementation of the control interface is based on high level web standards and, therefore, all properties of the system can be remotely managed and monitored by the operators using web browsers. The advanced data acquisition system at ASEC in Armenia was started in November, 2006. The reliability of the multi-client service was proven by continuously monitoring neutral and charged cosmic ray particles. Seven particle monitors are located at 2000 and 3200 m above sea level at a distance of 40 and 60 km from the main data server.     

Initial design of laboratories for sustainable habitation

An effective and self-sustainable artificial habitat design is essential for human spaceflight and expansion of mankind into orbit or towards other celestial bodies. There are two approaches that need to be implemented in future sustainable habitats: the use of re-cycling technologies in order to gain experience in closed-loop processes and the primary production of resource materials using In Situ Resource Utilisation (ISRU) principles. Various products will be provided and, where applicable, recycled in such a system taking into account basic human factors requirements such as crew work load capacity, safety and well-being, namely:     

The AWIATOR airborne LIDAR turbulence sensor

The development and first flight tests are described of a short pulse direct measuring UV LIDAR for the measurement of gusts, turbulence and potentially wake vortices. The results of these stage 1 tests confirm that relative wind velocities can be measured with a standard deviation of below 10 m/s even at high altitudes with no appreciable aerosol concentrations. Operating the system under various flight conditions including rain, dense clouds, and clear air up to 24,000 ft was highly successful. Means to push the standard deviation below 1.6 m/s, foremost by increasing the laser output power and the efficiency of the light collecting system, are identified and quantified. Questions of instrument stability are addressed.     

Automated payload and instruments for astrobiology research developed and studied by German medium-sized space industry in cooperation with European academia

For more than a decade Kayser-Threde, a medium-sized enterprise of the German space industry, has been involved in astrobiology research in partnership with a variety of scientific institutes from all over Europe. Previous projects include exobiology research platforms in low Earth orbit on retrievable carriers and onboard the Space Station. More recently, exobiology payloads for in situ experimentation on Mars have been studied by Kayser-Threde under ESA contracts, specifically the ExoMars Pasteur Payload. These studies included work on a sample preparation and distribution systems for Martian rock/regolith samples, instrument concepts such as Raman spectroscopy and a Life Marker Chip, advanced microscope systems as well as robotic tools for astrobiology missions. The status of the funded technical studies and major results are presented. The reported industrial work was funded by ESA and the German Aerospace Center (DLR).     

The rapid neutron-capture process and the synthesis of heavy and neutron-rich elements

Recent developments in theoretical model-calculations for the synthesis of heavy and neutron-rich chemical elements by means of the rapid neutron-capture process are reviewed. Special emphasis is put on a discussion of possible astrophysical sites, e.g. supernova models, and extrapolated nuclear input data as well. Numerical methods to solve complex nuclear reaction-networks are presented.     

A European probe to comet Halley

A European probe to comet Halley is proposed. The probe's model payload consists of 8 scientific instruments, viz. neutral, ion and dust impact mass spectrometers, magnetometer, medium energy ion and electron analyzer, camera, dust impact detectors and plasma wave experiment. Fly-by of the comet Halley nucleus will take place on November 28th, 1985, at about 500 km miss distance. The main spacecraft serves as relay link to transmit the observed data to Earth. As probe, a modified ISEE 2 design is proposed. Because of the cometary dust hazard expected in the coma a heavy dust shield (27 kg) is required, consisting of a thin front sheet and a 3 layer rear sheet. The probe is spin-stabilized (12 rpm), has no active attitude and orbit control capability and uses battery power only to provide about 1000 Wh for a measuring phase. A despun antenna transmits up to 20 kbit/s, in X-band. The total probe mass is estimated at 250 kg. The 3 model development programme should start in mid 1981 with Phase B.