Global Response of Martian Plasma Environment to an Interplanetary Structure: From Ena and Plasma Observations at Mars

As a part of the global plasma environment study of Mars and its response to the solar wind, we have analyzed a peculiar case of the subsolar energetic neutral atom (ENA) jet observed on June 7, 2004 by the Neutral Particle Detector (NPD) on board the Mars Express satellite. The “subsolar ENA jet” is generated by the interaction between the solar wind and the Martian exosphere, and is one of the most intense sources of ENA flux observed in the vicinity of Mars. On June 7, 2004 (orbit 485 of Mars Express), the NPD observed a very intense subsolar ENA jet, which then abruptly decreased within ∼10 sec followed by quasi-periodic (∼1 min) flux variations. Simultaneously, the plasma sensors detected a solar wind structure, which was most likely an interplanetary shock surface. The abrupt decrease of the ENA flux and the quasi-periodic flux variations can be understood in the framework of the global response of the Martian plasma obstacle to the interplanetary shock. The generation region of the subsolar ENA jet was pushed towards the planet by the interplanetary shock; and therefore, Mars Express went out of the ENA jet region. Associated global vibrations of the Martian plasma obstacle may have been the cause of the quasi-periodic flux variations of the ENA flux at the spacecraft location.     

Rationale for the development of the UK defence standards forsafety-critical computer software

Changes in the procurement environment and developments in technology that will require the adoption of new development certification procedures within the next few years are examined. Characteristics of safety-critical computer systems and the safety problems posed by digital computers are described. The way in which the changes have influenced the preparation of the new draft defence standards offered for public debate in the UK prior to their formal adoption by the Ministry of Defence is discussed. Principle features of the future safety-critical systems policy are outlined. The use of Ada for safety-critical software is considered     

Improved tracking of maneuvering targets: The use of turn-ratedistributions for acceleration modeling

Tactically maneuvering targets are difficult to track since acceleration cannot be observed directly and the accelerations are induced by human control or an autonomous guidance system therefore they are not subject to deterministic models. A common tracking system is the two-state Kalman filter with a Singer maneuver model where the second-order statistics of acceleration is the same as a first-order Markov process. The Singer model assumes a uniform probability distribution on the targets acceleration which is independent of the x and y direction. In practice, it is expected that targets have constant forward speed and an acceleration vector normal to the velocity vector, a condition not present in the Singer model. The work of Singer is extended by presenting a maneuver model which assumes constant forward speed and a probability distribution on the targets turn-rate. Details of the model are presented along with sample simulation results     

High Dynamic GPS Receiver Using Maximum Likelihood Estimationand Frequency Tracking

A new high dynamic global positioning system (GPS) receiver ispresented and its performance characterized by analysis,simulation, and demonstration. The demonstration receiver is abreadboard model capable of tracking a single simulated satellitesignal in pseudorange and range rate. Pseudorange and range rateestimates are made once every 20 ms, using a maximum likelihoodestimator, and are tracked by means of a third-order fadingmemory filter in a feedback configuration. The receiver trackspseudorange with rms errors of under 1 m when subjected tosimulated 50 g, 40 g/s circular trajectories. The tracking thresholdis approximately 28 dB·Hz, which provides 12 dB margin relativethe the minimum specified signal strength, assuming 3.5 dB systemnoise figure and 0 dB antenna gain.     

Towards a coherent remote sensing data policy

Access to space-based remote sensing data is critical for Earth science and the study of global change. This article summarizes a variety of US government Earth science data policies and problems. The authors examine current efforts to develop data policies for the next generation of US remote sensing programmes, noting likely problems based on past experiences. They argue that the goal of US Earth science data policy should be to provide the widest possible dissemination of data. Setting such a goal permits the development of a simple, coherent data policy that serves scientific, commercial and US government interests.     

Use of combined light flash and plasma measurements to study hypervelocity impact processes

We present new measurements concerning generation of light flash during hypervelocity impacts. We use iron particles (10⁻¹³ to 10⁻¹⁷ kg) with velocities over the range 1 to 42 km/s impacting semi-infinite targets (aluminium and molybdenum). The main results of previous work in the field are found to be reproduced with some slight deviations. For iron projectiles with given mass and velocity the energy of the flash (normalized to mass) is proportional to velocity to the power of 3.5 for aluminium targets and 3.9 for molybdenum targets. The duration of the flash is of order 1 microsecond. Simultaneous measurements of the generation of impact plasma do not change this. The onset of plasma generation of the bulk target material does not affect the total light flash energy. We discuss the duration of the flash compared to a simple calculation of temperature in the target and plasma vs time.     

Nanotechnology-based molecular test equipment (MTE)

This paper describes original research efforts in the design, simulation, and development of nanotechnology-based molecular test equipment (MTE). This is a research effort for testing printed circuit boards independent of traditional automatic test equipment (ATE) through the fabrication of MTE within integrated circuits (ICs). The MTE is embedded within the IC substrate and encapsulated within nanoprobes that connect between the surface and the substrate of the IC at various functional areas. A process is followed whereby IC device simulation is performed to assess the electrical, chemical, and structural properties of integrated and adjacent substrate devices. Through this approach the nominal and failed device performance parameters of interest to substrate-based MTE are found. Discussion of the development and application of MTE within IC architectures is provided, including such topics as the effect of substrate composition on the design and realization of MTE, interfaces between MTE and IC devices, and reporting of MTE results to the IC surface and technician. Potential application areas within different device functions will also be identified. A chemical structure diagram is also provided to illustrate the implementation of MTE using discrete device configurations with MTE-augmented logic