配电自动化系统安全防护方案的研究

论文在描述配电自动化系统的功能和结构的基础上 ,根据全国电力二次系统安全防护总体方案 ,提出了配电自动化系统的安全防护方案。     

超声速燃烧实验研究(Ⅱ)

用电弧加热空气,对带有突扩台阶后扩张形,入口M_a=2.1和3.0的超声速燃烧室进行了实验研究,并对两种不同燃烧室长度、煤油和氢气在垂直和平行喷射下的燃烧状况作了比较。     

一种运载火箭用大功率电动伺服驱动器的散热设计

散热对电子设备的性能有着直接的影响,散热器广泛应用于电子产品的热设计用于改善其散热能力,因此散热器应作为关键部件进行设计。针对航天领域使用的大功率电动伺服驱动器的散热问题,提出了通过热力学理论计算指导散热器结构设计的方法。首先通过理论计算结果确定散热器的结构尺寸,然后通过PRO/E三维建模软件对散热器进行建模并利用ANYSY ICEPAK热仿真软件对所设计的散热器进行热仿真,最后搭建了伺服驱动器的热试验环境。仿真结果和试验数据均验证了该设计方法的正确性。     

Vibration signal-based chatter identification for milling of thin-walled structure

In high speed milling aeronautical part, tool condition monitoring(TCM) is very important, because it is prone to get a chatter owing to the low stiffness of thin-walled structures. And the TCM is key technology for automated machining. In this paper, aiming to chatter monitoring in thin-walled structure milling, a variational mode decomposition – energy distribution(VMD-ED)method is proposed to improve the identification accuracy. And a moving average root mean square – mean value(MARMS-MV) ide...     

针栓式推力室冷却特性试验研究

针栓式发动机具有推力调节简单、声学燃烧稳定性好和成本低廉等一系列优点,但目前对针栓式推力室的冷却特性掌握还不够深入,研制过程中曾多次出现因推力室冷却组织不好而烧蚀的问题。采用针栓式推力室试验件,对身部的冷却特性进行了深入研究,结果表明:推力室圆柱段前端的温度较低,无需采用专门的冷却措施;末端内侧气壁温度会达到约1650℃,局部存在明显的烧蚀现象,必须采取有效的热防护措施;下游冷却液膜量的变化对圆柱段的冷却特性影响较小。     

Numerical investigation of flow mechanisms of tandem impeller inside a centrifugal compressor

This study numerically investigated a single stage centrifugal compressor ‘‘Radiver’’ with a wedge diffuser and several tandem-designed impellers to explore the flow phenomena within the tandem impeller and the potential to enhance compressor performance. The results demonstrate that tandem design and clocking fraction (λ_s) significantly affects the compressor performance. The compressor stage with tandem impellers of Series A of boundary layer growth interruption alone are observed to have a widely operating range but efficiency and total pressure ratio penalty compared with that of conventional impeller. The tandem impeller with at least the same impeller efficiency as the conventional design is considered as a critical design criteria so that further modification process based on the flow characteristic of tandem impeller is necessary. In order to restrain the inducer wake and exducer shock losses, parameters modification of blade angle and thickness distributions are necessary and the modified tandem impeller of Series B is obtained. The modified tandem impeller with 25% clocking arrangement shows an 8.45% stall margin increase and maintains the total pressure ratio and efficiency as the conventional design, which proves the potential of tandem impeller to improve compressor stage performance. It is noteworthy that the tandem impellers of Radiver have not shown obviously balanced exit flow field and the fundamental mechanism of stall margin extending of tandem impeller lies on the improved impeller/diffuser matching performance resulting from the incidence angle variation at diffuser inlet.     

二维变厚板的J积分分析

本文将J.R.Rice提出的J积分公式扩充应用到二维变厚板。本文把变厚度的影响以修正项形式引入J积分公式,从而推导出二维变厚板的J积分扩充表达式。      

发动机喘振-爆燃故障的信号分析

本文着重介绍某双轴发动机喘振—爆燃故障用 FFT信号处理机进行诊断和信号分析的方法。文章结合发动机在湍流动态畸变流场下的喘振—爆燃试验研究,介绍了试验设备、测量系统和对发动机“故障”信号分析的结论。湍流型动态畸变流场下的压气机喘振多为“漂移型”喘振,表现有随机性。发动机对动态畸变流场的敏感度远高于稳态畸变。利用 FFT信号分析技术进行故障诊断,有广泛应用价值。它较其它方法精确、迅速、简便。      

微肋薄膜减阻的实验研究

作者根据湍流附面层结构新的解释及非光滑特殊造型表面可以减小流体阻力的事实,作者研制了微肋条减阻薄膜,贴在赛船上参加比赛,获得好成绩[1、2] 。作者在风洞中做了贴及不贴微肋薄膜平板试验对比。结果贴微肋薄膜可减阻约 7%。      

轴流风扇旋转失速时的流场测量与分析

针对渐近型旋转失速在一轴流风扇上进行了一些测量工作,包括失速时的激光平均流场测量和热丝动态测量两大类。激光平均流场研究表明失速团主要活动在风扇转子前缘,而转子叶片通道中的流场则主要表现为叶尖间隙流的横向堵塞流动。