水平表面气流剪切作用下的水膜厚度

飞机结冰表面上的液态水受气流吹拂作用会发生向后溢流,从而影响结冰区域范围及防冰系统设计;为了获得水膜流动规律,对水平平板表面上气流剪切驱动的水膜流动进行了实验测量和建模分析。通过水膜流动风洞试验台产生高速气流驱动水膜的流动,使用色散共焦位移计测量同一位置的水膜在不同时刻的厚度变化,结果表明气-液界面由底层薄水膜和多种尺度的波动组成,具有变化速度快随机性强的特点。通过水膜厚度随气流速度及水膜雷诺数的变化规律,发现平均水膜厚度与两者均呈现出单调非线性的依赖关系。基于薄水膜流动理论和平均水膜厚度实验结果,提出了高速气流剪切作用下的气-液波动界面剪切因子计算式,适用于风速17.8~52.2m/s,水膜雷诺数26~128之间的平板水膜流动计算。     

基于特征模型的火箭发动机伺服控制系统设计

以新型大推力火箭发动机为研究对象,提出了基于特征模型的伺服系统控制器设计方法。首先,介绍了特征建模理论并讨论了特征模型参数范围;其次,采用人工蜂群算法实时估计火箭发动机伺服系统特征模型参数,使其满足特征模型输出与实际系统输出特性等价条件;最后,使用黄金分割自适应控制律保证系统在参数估计过程中的闭环稳定性,同时引入前馈跟踪控制律,逻辑积分控制律和逻辑微分控制律使伺服控制系统快速、精确跟踪线位移指令并改善动态性能。仿真结果表明,设计的火箭发动机伺服控制系统指令跟踪精度高,动态特性良好,鲁棒性强。     

月面探测器月夜休眠自主唤醒方法

提出一种月面探测器休眠自主唤醒方法:月夜来临时通过地面控制对月面探测器所有设备进行休眠操作;月昼来临时靠太阳光触发唤醒功能,由休眠唤醒电路自主发送指令唤醒探测器,解决月面探测器安全可靠度过月夜的能源供给问题。该方法已通过在轨验证,可为其他深空探测任务提供参考。     

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.     

Numerical study on flow fields and aerodynamics of tilt rotor aircraft in conversion mode based on embedded grid and actuator model

A method combining rotor actuator disk model and embedded grid technique is presented in this paper, aimed at predicting the flow fields and aerodynamic characteristics of tilt rotor aircraft in conversion mode more efficiently and effectively. In this method, rotor's influence is considered in terms of the momentum it impacts to the fluid around it; transformation matrixes among different coordinate systems are deduced to extend actuator method's utility to conversion mode flow fields' calculation. Meanwhile, an embedded grid system is designed, in which grids generated around fuselage and actuator disk are regarded as background grid and minor grid respectively, and a new method is presented for ‘donor searching' and ‘hole cutting' during grid assembling. Based on the above methods, flow fields of tilt rotor aircraft in conversion mode are simulated, with threedimensional Navier–Stokes equations discretized by a second-order upwind finite-volume scheme and an implicit lower–upper symmetric Gauss–Seidel(LU-SGS) time-stepping scheme. Numerical results demonstrate that the proposed CFD method is very effective in simulating the conversion mode flow fields of tilt rotor aircraft.     

风扇进口噪声预测模型的改进

针对Heidmann模型对风扇进口低频噪声(1k Hz)预测结果偏低的情况,通过引入风扇叶尖弦长雷诺数和相关几何参数改进了Heidmann模型中风扇进口宽频噪声的频谱修正函数,确定了其中频谱修正系数为0.085。对比改进模型和Heidmann模型的风扇进口噪声预测结果发现:在亚声速工况下,改进的模型很好地改善了风扇进口低频噪声的预测结果,改进幅值可以达到约45d B;而在超声速工况下,由于风扇进口产生的组合单音噪声成为风扇进口噪声的主要组成部分,除了在小于100Hz的频域内,改进的模型与Heidmann模型的预测结果差别不大。     

一种高超声速滑翔飞行器轨迹智能预测方法

针对高超声速滑翔飞行器(Hypersonic glide vehicle, HGV)机动性强、轨迹预测困难的问题,选取气动加速度作为预测参数,提出了一种基于集合经验模态分解和注意力长短时记忆网络的HGV轨迹智能预测方法。首先,以HGV六自由度运动方程为基础,分析了其机动特性和气动力变化规律,建立了动力学跟踪模型,对气动加速度进行实时估计;其次,利用集合经验模态分解对估计的气动加速度进行分解和重构,减弱噪声影响,避免对预测模型的干扰;最后,利用去噪后的气动加速度数据对注意力长短时记忆网络进行训练,进而预测未来气动加速度数据并重构HGV未来轨迹,实现轨迹的在线预测。实验仿真表明,该方法能有效预测HGV机动轨迹,预测精度高、稳定性好。     

基于信息流的耦合数字卫星构建方法

针对卫星的地面测试、系统演练及在轨运行等需求,提出了基于信息流的耦合数字卫星构建方法,通过低成本、低风险、高效率的模拟硬件行为,解决了硬件未全部就绪的情况下,开展软件全生命周期的并行开发及测试;通过提供动力学、能源、热模型等耦合数学模型库,解决仿真系统和真实卫星行为差异问题,提供了在轨卫星故障链预演和分析平台.基于信息流的耦合数字卫星以虚拟处理器仿真为核心,通过硬件行为模拟,结合多物理场数字模型,扩展了数字卫星仿真的覆盖面,加强了仿真的真实性,降低了成本与风险.