CALS在航空订货领域的应用展望

随着国内信息技术的迅猛发展和广泛应用,传统的武器装备研制生产、使用保障体系正在向新型的信息化武器装备体系转变.从而为持续采办与全寿命支持(CALS)在国内武器装备订货中的应用提供了必要的技术基础.本文主要探讨CALS在航空订货领域的应用前景.     

降低PLC系统峰均比的低复杂度改进SLM算法

针对信道慢时变特性及噪声复杂的特点,提出了适用于低压电力线通信的降低峰均比的改进算法.改进算法对原始输入序列中的部分数据进行循环移位来获得一系列不同的新数据序列;在每个新数据序列尾部插入相应的边带信息组成一个输入候选序列;对这一系列不同的输入候选序列分别实施傅里叶反变换,得到不同的输出序列;从中选择峰均比最小的用于传输,达到降低系统峰均比的目的.结果表明:改进算法能够有效地降低系统的峰均比,并且能够获得更好的误码率性能,同时具有比传统选择性映射方法更低的计算复杂度.     

Conceptual design of a bioregenerative life support system containing crops and silkworms

This article summarizes a conceptual design of a bioregenerative life support system for permanent lunar base or planetary exploration. The system consists of seven compartments – higher plants cultivation, animal rearing, human habitation, water recovery, waste treatment, atmosphere management, and storages. Fifteen kinds of crops, such as wheat, rice, soybean, lettuce, and mulberry, were selected as main life support contributors to provide the crew with air, water, and vegetable food. Silkworms fed by crop leaves were designated to produce partial animal nutrition for the crew. Various physical-chemical and biological methods were combined to reclaim wastewater and solid waste. Condensate collected from atmosphere was recycled into potable water through granular activated carbon adsorption, iodine sterilization, and trace element supplementation. All grey water was also purified though multifiltration and ultraviolet sterilization. Plant residue, human excrement, silkworm feces, etc. were decomposed into inorganic substances which were finally absorbed by higher plants. Some meat, ingredients, as well as nitrogen fertilizer were prestored and resupplied periodically. Meanwhile, the same amount and chemical composition of organic waste was dumped to maintain the steady state of the system. A nutritional balanced diet was developed by means of the linear programming method. It could provide 2721 kcal of energy, 375.5 g of carbohydrate, 99.47 g of protein, and 91.19 g of fat per capita per day. Silkworm powder covered 12.54% of total animal protein intakes. The balance of material flows between compartments was described by the system of stoichiometric equations. Basic life support requirements for crews including oxygen, food, potable and hygiene water summed up to 29.68 kg per capita per day. The coefficient of system material closure reached 99.40%.     

缝隙间隙密封在阀设计中的运用

在某型飞机使用的阀中采用了缝隙间隙密封,依据计算、设计和试验阐述了泄漏量与压力、间隙尺寸、粘度及材质的关系。当间隙尺寸确定时,粘度越大,压力越小,材质越硬,则泄漏量越小,即阀在采用缝隙间隙密封时,泄漏量与工作介质的种类有关,每种工作介质粘度不同,泄漏量也不同,阀体材质越密,抗泄漏越好。因此,应尽量选择粘度系数大的介质和材质较密的材料。     

复杂结构的非线性检测

由于非线性系统的复杂性，现有的各种非线性检测方法都有局限性。从频域、幅域和时域三方面综合考察复杂结构的非线性表现，采用六种方法进行非线性检测，给出一个综合描述系统非线性程度的指标－非线性因子。鉴于非线性系统表现出的非线性强弱与系统所受的激励有直接的关系，将非线性因子定义为与激励的幅值特性和频率特性相关的系数指标。对几种典型非线性系统的仿真模型进行了检测，以验证非线性因子的有效性。     

PID控制器参数的隶属函数自整定技术及其应用研究

Ｐ Ｉ Ｄ 控制技术在工业过程控制中得到了广泛应用，但传统的 Ｐ Ｉ Ｄ 控制器不具有参数的在线整定功能，当系统工作条件较差时，难以满足控制要求，从而影响了控制品质的进一步提高。本文应用模糊数学中的隶属函数， 以工程施工机械中大量应用的液压阀控油缸为被控对象，建立数学模型和试验系统，实现 Ｐ Ｉ Ｄ 控制器参数的在线自整定。文中对其理论方法、计算机仿真和应用研究进行了论述。     

旋流畸变对压气机失速发展过程影响的试验研究

为研究进气旋流畸变对轴流压气机失速发展过程的影响,设计了一种叶片式旋流畸变发生器。通过改变叶片式旋流畸变发生器的叶片安装方式来改变进口气流流向,产生对涡或整体涡,研究均匀进气、对涡和整体涡进气条件下低速轴流压气机失速发展的特点。试验结果表明:旋流畸变发生器达到了预期的设计要求,在压气机进口前产生了对涡和整体涡。压气机转子对进口旋流畸变有很大的影响,对正向旋流有一定加强作用,使正向旋流强度增大;对反向旋流有一定抑制作用。旋流畸变减小了压气机的稳定裕度,切向气流角越大效果越明显,使其更快进入失速,其中以对涡进气和正向涡进气条件下最为明显。旋流畸变进气条件下压气机中失速团的产生机理不发生改变,失速团传播频率不发生改变。     

一个非常规前体机身的流动显示研究

描述了有类似Ｅｒｉｃｋｓｏｎ前体的非常规机身的初步流动显示研究结果，包括测力、表面油流和激光片光流动显示结果和用层流Ｎ－Ｓ方程进行数值模拟的结果。计算和试验的参数范围：α＝０°～５０°，β＝０°～２０°，虽然计算与试验所用的外形在后部有一些不同，但是两者在涡的位置方面显示了良好的一致性。同时研究也表明，大攻角的流动特性可以通过改变机身前体形状进行控制。通过研究还表明，这类前体在改善大攻角横侧方向安定性方面具有很大的潜力。     

Evaluation of multiple radar target trackers in stressfulenvironments

This paper evaluates the performance of multiple target tracking (MTT) algorithms in real-life stressful radar tracking environments. Real closely spaced maneuver radar data, generated by six F-18 fighters and other targets, were collected jointly by the defence departments of Canada and United States to support this practical MTT algorithm evaluation study. A set of performance metrics was defined here to compare the suboptimal nearest neighbor (SNN), global nearest neighbor (GNN), and various variants of the joint probabilistic data association (JPDA) MTT trackers. Results reveal an interesting result that all these MTT algorithms exhibited very close performance. In addition, the weighted sum approach of the PDA/JPDA trackers which are theoretically effective were observed to perform poorly in tracking closely spaced targets. Overall speaking, the GNN filter based on the Munkres algorithm had the best performance in terms of both tracking performance and robustness     

X-ray induced alterations in the differentiation and mineralization potential of murine preosteoblastic cells

To evaluate the effects of ionizing radiation (IR) on murine preosteoblastic cell differentiation, we directed OCT-1 cells to the osteoblastic lineage by treatment with a combination of β-glycerophosphate (β-GP), ascorbic acid (AA), and dexamethasone (Dex). In vitro mineralization was evaluated based on histochemical staining and quantification of the hydroxyapatite content of the extracellular bone matrix. Expression of mRNA encoding Runx2, transforming growth factor β1 (TGF-β1), osteocalcin (OCN), and p21^CDKN1A was analyzed. Exposure to IR reduced the growth rate and diminished cell survival of OCT-1 cells under standard conditions. Notably, calcium content analysis revealed that deposition of mineralized matrix increased significantly under osteogenic conditions after X-ray exposure in a time-dependent manner. In this study, higher radiation doses exert significant overall effects on TGF-β1, OCN, and p21^CDKN1A gene expression, suggesting that gene expression following X-ray treatment is affected in a dose-dependent manner. Additionally, we verified that Runx2 was suppressed within 24 h after irradiation at 2 and 4 Gy. Although further studies are required to verify the molecular mechanism, our observations strongly suggest that treatment with IR markedly alters the differentiation and mineralization process of preosteoblastic cells.