Multiple Beam Satellite System Optimization

An analytical method is developed for determining the basic RF link parameters that are required in a satellite system design. Certain simplifying assumptions are required and specific system elements are selected. Two different design criteria are considered; optimizing the per-beam signal energy to noise spectral density ratio (Eb/N0), and minimizing the per-user costs. These two criteria are complements of each other subject to coverage and performance constraints. The model can be used to rapidly assess tradeoffs in various system elements. A specific example of a domestic satellite system is considered. The economic analyses are also considered and the economy of scale effect is demonstrated for the design example and considered.     

On the generation of satellite position (and velocity) by a mixed analytical-numerical procedure

The generation of accurate Earth-satellite ephemerides by numerical integration, over a period of perhaps weeks, can consume an inordinate amount of computer time. No satisfactory purely analytical procedure exists, but if short-period components of the standard elliptic elements are removed analytically, the resulting mean elements can be integrated with a step time that is longer than the satellite's orbital period.The definition of the mean elements depends on the particular perturbations included in the orbit generator and regarded as non-resonant. It is best if short-period perturbations are not applied to the orbital elements themselves but to the satellite's position (and velocity if required), expressed in a system of cylindrical polar coordinates, and the paper shows how mean elements can be recovered from position and velocity.A computer program has been written to test the proposed procedure for generating ephemerides, using a truncated potential field. Some results from this program are presented.     

Time-resolved spectroscopy of accretion disks in Algols

Time-resolved spectroscopy during the eclipse of short-period Algol systems, has shown their accretion disks to be small, turbulent structures with non-Keplerian velocity fields and asymmetries between the leading and trailing sides of the disk. These transient disks are produced by the impact of the gas stream on the mass-gaining star, and occur in systems where the star is just large enough to ensure the stream collision is complete. These emission line disks and the excess continuum emission do not always occur together. The permanent accretion disks in at least a few of the long-period Algol systems have features in common with the transient disks including non-Keplerian velocity fields.     

Lightweight (AlGaAs)GaAs/CuInSe2 tandem junction solarcells for space applications

Mechanically stacked tandem cells consisting of GaAs thin-film upper cells and CuInSe₂ thin-film lower cells have been developed to meet the increasing power needs projected for future spacecraft. The authors report the fabrication of the first highly efficient lightweight GaAs/CuInSe₂ tandem cell on a 2-mil thick substrate, update recent performance improvements in thin-film GaAs/CuInSe₂ tandem cells, and discuss their application to space power systems. The efficiency of 4-cm² cells has improved to 21.6% AM0, the highest ever reported for a thin-film photovoltaic cell. Lightweight 4-cm² tandem cells have been successfully fabricated with efficiencies as high as 20.8%. These cells weighed about 180 mg without optimized substrate trimming. Radiation and operating temperature effects on GaAs/CuInSe₂ tandem cells are also discussed, and an interconnect scheme to form a voltage-matched string is described     

LIPS III-a solar cell test bed in space

The LIPS III satellite, which was launched into a 1100-km circular orbit of 60° inclination in the spring of 1987, is discussed. LIPS III is a member of the living-plume-shield class of spacecraft, all of which were built around a simple sheet metal plume deflector. The purpose of LIPS III was to provide a testbed for space power sources. An overview of the LIPS III system is given, and the experiments submitted for it, all but one of which were photovoltaic in nature, are described     

A design procedure for the phase-controlled parallel-loadedresonant inverter

High-frequency-link power conversion and distribution based on a resonant inverter has been recently proposed. The design of several topologies is reviewed and a simple approximate design procedure is developed for the phase-controlled parallel-loaded resonant inverter. This design procedure seeks to ensure the expected benefits of resonant conversion and is verified by data from a laboratory 2.5 kVA, 20-kHz converter. A simple phasor analysis is introduced as a useful approximation for design purposes. Experimental results show that under transient conditions such as load short-circuit, a reversal of the expected commutation sequence is possible. This should be accounted for in the design of the power circuit, or prevented by the design of the controller     

Electrical power distribution on space based radar satellites

The radar payload on a space-based radar (SBR) satellite could require tens of kilowatts of power distributed to many small loads over a large area. This poses special problems for the power distribution and control system (PDCS). A study that examined the power requirements of an SBR spacecraft is reported. A baseline prime power system, generating about 30 kW, was derived. The proposed distribution network would transmit 240 V at 20 kHz. The voltage would be downconverted in one converter for about 100 transmit/receive modules. The design considerations are discussed, and the baseline PDCS is described     

Incremental planning to control time-constrained blackboard-basedproblem solver [vehicle monitoring]

A planner that improves the control decisions made by a blackboard-based problem solver is described. This planner interleaves planning and execution. It sketches out major plan steps but incrementally details actions for only the next step since earlier actions influence how (and whether) to pursue a plan. The planner also reasons about time constraints, revising plans to meet problem-solving deadlines and deciding when it has done enough work on a problem. Implementation of these mechanisms is outlined, and experiments are discussed showing how they reduce overall computation and improve problem solving