航空液压壳体类零件数字化高效加工

随着科研项目的增多,原有模式下的生产成本和生产时间不断增加,尤其是交付时间很难保证.航空液压壳体类零件作为液压设备中的关键零件,对产品的总体功能和成本起着至关重要的作用.     

Using natural features for vision based navigation of an indoor-VTOL MAV

The use of natural features for vision based navigation of an indoor Vertical-Take-Off-and-Landing (VTOL) Micro Aerial Vehicle (MAV) named Air-Quad is presented. Air-Quad is a small four-rotor helicopter developed at the ITE.Such a helicopter needs reliable attitude information. The measurements of the used MEMS gyroscopes and accelerometers are corrupted by strong noise. To be useful, the MEMS sensors have to be part of an integrated navigation system with aiding through complementary sensors like GPS or the computer vision module presented here.In the computer vision module, feature points are detected and tracked through the image sequence. The relative rotation and translation of the camera are estimated using the two-dimensional motion of the feature points.The three-dimensional points in the scene are modeled with the image coordinates of their first sighting and their inverse depths. Only these inverse depths are estimated for the feature points. An efficient sparse bundle adjustment algorithm is used to improve the estimation of the scene structure and the navigation solution.It is shown that the use of the computer vision module greatly improves the navigation solution compared to a solution based only on MEMS sensors.     

跨声速压气机多圆柱孔式处理机匣设计与扩稳机理研究

基于对跨声速轴流压气机内部失稳触发机制的认识,设计了一种新型多圆柱孔式处理机匣结构。对带该处理机匣的跨声速轴流压气机转子Rotor-37的内部流动进行了全三维非定常数值模拟,结果表明该新型多圆柱孔式处理机匣结构可使压气机的综合裕度提高6.5%,而最高效率点效率仅降低0.19%。对多圆柱孔式处理机匣的扩稳机理进行了详细分析,结果表明处理机匣能有效消除低速流体团引起的通道阻塞现象,并将低速阻塞流体团抽吸进入处理机匣容腔,然后从前端喷口预旋喷出以抑制叶顶区域的流动分离,从而有效提高跨声速轴流压气机的失速裕度。     

Effect of earth?s rotation and range foldover on space-based radar performance

Space-based radar (SBR) by virtue of its motion generates a Doppler frequency component to the clutter return from any point on the Earth as a function of the SBR-Earth geometry. The effect of the rotation of the Earth around its own axis also adds an additional component to this Doppler frequency. The overall effect of the rotation of the Earth on the Doppler turns out to be two correction factors in terms of a crab angle affecting the azimuth angle, and a crab magnitude scaling the Doppler magnitude of the clutter patch. Interestingly, both these quantities depend only on the SBR orbit inclination and its latitude and not on the location of the clutter patch of interest. Further, the crab angle has maximum effect for an SBR on a polar orbit that is above the equator. The crab magnitude, on the other hand, peaks for an SBR on an equatorial orbit. Together with the range foldover phenomenon, their overall effect is to generate Doppler spread/splitting resulting in wider clutter notches that degrade the clutter nulling performance of adaptive processing techniques. A detailed performance analysis and methods to minimize these effects are discussed here     

用课程群方法加强计算机网络专业课程体系建设

论文从高职高专院校课程体系建设的角度,阐述了课程体系建设的相关背景,基本思想和意义,以及计算机网络专业课程体系建设的特殊性,并提出了用课程群方法进行网络专科课程体系建设的具体实践措施。     

配电自动化系统安全防护方案的研究

论文在描述配电自动化系统的功能和结构的基础上 ,根据全国电力二次系统安全防护总体方案 ,提出了配电自动化系统的安全防护方案。     

超声速燃烧实验研究(Ⅱ)

用电弧加热空气,对带有突扩台阶后扩张形,入口M_a=2.1和3.0的超声速燃烧室进行了实验研究,并对两种不同燃烧室长度、煤油和氢气在垂直和平行喷射下的燃烧状况作了比较。     

单目视觉三维运动位姿测量方法研究

针对基于点特征的单目视觉位姿测量,研究了一种基于不共面5个编码特征点的单目视觉解算算法,利用大靶面高分辨率相机采集运动物体姿态图像,利用目标物体上编码特征点间的几何约束关系,通过正交迭代解算算法完成目标物体的位姿测量。实验结果表明：位移测量不确定度优于0.5mm,姿态测量不确定度优于0.05°,可满足航空航天领域试验测量要求。     

一种运载火箭用大功率电动伺服驱动器的散热设计

散热对电子设备的性能有着直接的影响,散热器广泛应用于电子产品的热设计用于改善其散热能力,因此散热器应作为关键部件进行设计。针对航天领域使用的大功率电动伺服驱动器的散热问题,提出了通过热力学理论计算指导散热器结构设计的方法。首先通过理论计算结果确定散热器的结构尺寸,然后通过PRO/E三维建模软件对散热器进行建模并利用ANYSY ICEPAK热仿真软件对所设计的散热器进行热仿真,最后搭建了伺服驱动器的热试验环境。仿真结果和试验数据均验证了该设计方法的正确性。     

Vibration signal-based chatter identification for milling of thin-walled structure

In high speed milling aeronautical part, tool condition monitoring(TCM) is very important, because it is prone to get a chatter owing to the low stiffness of thin-walled structures. And the TCM is key technology for automated machining. In this paper, aiming to chatter monitoring in thin-walled structure milling, a variational mode decomposition – energy distribution(VMD-ED)method is proposed to improve the identification accuracy. And a moving average root mean square – mean value(MARMS-MV) ide...