Al/Ni含能多层膜在Al2O3陶瓷/不锈钢焊接中的应用

采用磁控溅射设备,生长AuSn合金做焊料层、Al/Ni含能多层膜做热量提供层,实现了不锈钢和Al_2O_3间的异质材料自蔓延高温扩散焊。利用SEM、XRD和DSC等测试手段表征AuSn合金和Al/Ni含能多层膜的微观形貌、相成分和放热量;用万能试验机测试焊接接头的力学性能。结果表明,AuSn合金的质量比基本达到80∶20,而多层膜的层状结构清晰,反应热达到1 239 J/g。焊接实验结果表明,仅使用AuSn焊料时,剪切强度仅为46 MPa,在增加Al/Ni含能多层膜后,其剪切强度可达90 MPa,强度提高了约一倍。焊接接头的界面显微形貌和相结构研究表明,剪切强度的增强主要是Al/Ni多层膜提供了额外能量使得界面处的反应剧烈,陶瓷金属化层与中间层的反应加剧,形成了新的反应生成物。     

Estimation of ground range on the sweep frequency backscatter leading edge

The high frequency management system with backscatter radar supplies the real time ionosphere channel conditions to high frequency users, which leads to the demand for the ground range between the radar location and the scatters on the distant ground. The ionosphere electron density profile is usually inversed to obtain the ground range. An inversion algorithm, with which the ground range on the leading edge of the backscatter ionograms can be obtained without electron density, is presented in this paper. The ray path geometry of the backscatter sounding and the change in the group path on the leading edge with operating frequency are used to derive the ground range. Synthesized backscatter ionogram and experimental backscatter ionograms are processed to validate the algorithm. The results indicate that the algorithm is usable for high frequency management system.     

EBE技术在结构分析中的应用（Ⅰ）─EBE矩阵向量乘积方法及其实现

矩阵向量乘积运算是数值分析领域中的一种基本运算。本文基于单元分组技术，提出了在有限元结构分析中，当不形成总刚度矩阵而进行矩阵向量乘积的ＥＢＥ计算方法。该方法不仅预处理过程简单，实现容易，而且其并行化、向量化处理都极为直接。同时，数值试验结果还表明了它的有效性。     

Structure and kinetic properties of slow-mode shocks associated with magnetic reconnection in the near-Earth magnetotail

We study the structure and kinetic properties of slow-mode shocks near the plasma sheet boundary layer (PSBL) associated with magnetic reconnection by Cluster observation. The presence of slow-mode shocks is confirmed by traditional Rankine–Hugoniot (RH) analysis and Monte-Carlo shock fitting method. The Walén analysis, applied to the tailward flow associated with slow-mode shocks, also supports that plasma was accelerated across a Petschek-type slow-mode shock connected to the diffusion region. Back-streaming ions were observed on the shock layer, and cold ions were accelerated and heated by slow-mode shocks. In addition, whistler and electrostatic solitary waves were observed around the slow-mode shocks. These waves might be excited by the observed field-aligned electron beams near the shocks.     

空间运输飞行器材料与制造技术需求分析

空间运输飞行器已经成为国际航天技术新的发展趋势,对材料和制造技术从两方面提出了新的需求:异形贮箱制造技术和热控材料与制造技术。本文对这两个问题进行了分析,结果表明:异形贮箱和热控硬件的材料与制造是制约空间运输飞行器发展的基础技术,必须在空间运输飞行器研制热潮之前先期突破。     

离子液体电喷推力器的关键技术及展望

首先介绍离子液体电喷推力器的工作原理和分类，通过与其他相同推力量级的电推力器对比进一步分析了其特点，然后总结了离子液体电喷推力器的国内外研究现状，在此基础上重点梳理了微尺度下带电粒子的产生与加速、微细制造与精密装配、推进剂贮存和供给、高升压比微功率电源处理单元以及比冲和推力测试等离子液体电喷推力器研制过程中涉及的关键技术，最后展望了小型化、模块化与推力密度提升的发展趋势并提出离子液体电喷推力器的发展构想。     

Effects of TADs on the F region of the mid-latitude ionosphere during an intense geomagnetic storm

Based on observations of two ionosondes at Wuhan and Kokubunji, this paper presents effects of TADs on the daytime mid-latitude ionosphere during the intense geomagnetic storm on March 31, 2001. During a positive ionospheric storm, the start of the enhancement of the foF2 (F2 peak plasma frequency) at Wuhan lags that at Kokubunji by 15 min, which corresponds to the time interval of traveling atmospheric disturbances (TADs’) propagation from Kokubunji to Wuhan. Associated with the uplifting of the hmF2 (height of F2 peak) caused by TADs, it is observed by the two ionosondes that the F1 cusp becomes better developed. Therefore, during a geomagnetic storm, TADs originating from the auroral oval may have a strong influence on the shape of the electron density profile in the F1 region ionosphere at middle latitudes. It is highly likely that TADs are responsible for the evolution of the F1 cusp.     

A discrete event systems approach to discriminating intermittent from permanent faults

Almost all work on model-based diagnosis （MBD） potentially presumes faults are per- sistent and does not take intermittent faults （IFs） into account. Therefore, it is common for diag- nosis systems to misjudge IFs as permanent faults （PFs）, which are the major cause of the problems of false alarms, cannot duplication and no fault found in aircraft avionics. To address this problem, a new fault model which includes PFs and IFs is presented based on discrete event systems （DESs）. Thereafter, an approach is given to discriminate between PFs and IFs by diagnosing the current fault. In this paper, the regulations of （PFs and IFs） fault evolution through fault and reset events along the traces of system are studied, and then label propagation function is modified to account for PFs and the dynamic behavior of IFs and diagnosability of PFs and IFs are defined. Finally, illustrative examples are presented to demonstrate the proposed approach, and the analysis results show the fault types can be discriminated within bounded delay if the system is diagnosable.     

梯型螺纹量规在航天产品检测中的应用

介绍了梯形螺纹量规的的工艺性能,从外观、相互作用、螺距半角和中径的测量等方面分析了梯形螺纹量规检测技术,并对其应用规划加以阐述,以提升航天军工产品的工艺技术水平和使用可靠性。     

精密复杂零件的工艺设计过程分析

针对航天控制产品精密复杂零件的工艺难点,以该类零件的工艺设计过程为主线,分别论述了材料定额编制、工艺路线设计以及工序设计过程中的注意事项和工艺方案设计方法,并以实例进行了简要说明。