A prospectus on airborne laser mapping systems

Airborne laser systems have demonstrated enormous potential for topographic and bathymetric mapping. Both profiling and scanning systems have been evaluated for terrain elevation mapping, stream valley cross-section determination, and nearshore bottom profiling. Performance of the laser systems has been impressive and for some applications matches current operational accuracy requirements. Determining the position of individual laser measurements remains a constraint for most applications. Laser technology constrains some terrain and bathymetric applications, particularly for water penetration and frequency of measurements for high-spatial resolution over large areas.     

A proposed new policy for planetary protection

In order to control contamination of planets by terrestrial microorganisms and organic constituents, U.S. planetary missions have been governed by a planetary protection (or planetary quarantine) policy which has changed little since 1972. This policy has recently been reviewed in light of new information obtained by planetary exploration during the past decade and because of changes to, or uncertainties in, some parameters used in the existing quantitative approach. On the basis of this analysis, a new planetary protection policy, with the following key features, is proposed: deemphasizing the use of mathematical models and quantitative analyses; establishing requirements for target planet/mission type (i.e., orbiter, lander, etc.) combinations; considering sample return missions a separate category; simplifying documentation; and imposing implementing procedures (i.e., trajectory biasing, cleanroom assembly, spacecraft sterilization, etc.) by exception, i.e., only if the planet/mission combination warrants such controls. Interpretation of the new policy for missions like Galileo, Mars Surface Sample Return, Saturn Orbiter with Twin Probes, and missions to comets are considered. In general, the new policy proposes elimination of all but documentation requirements for most planetary missions and simplification of the remaining compliance procedures.     

Late skin damage in rabbits and monkeys after exposure to particulate radiations.

Skin biopsies were taken from the central regions of the ears of New Zealand white rabbits following localized exposure of one ear of each rabbit to 530 MeV/amu Ar or 365 MeV/amu Ne ions. The unirradiated ears served as controls. Biopsies were taken also from the chests and inner thighs of rhesus monkeys after whole-body exposure to 32 MeV protons and from unirradiated control animals. The linear energy transfers (LET infinity's) for the radiations were 90 +/- 5, 35 +/- 3, and approximately 1.2 keV/micrometer, respectively. In the rabbit studies, explants were removed with a 2 mm diameter dermal punch at post-irradiation times up to five years after exposure. Similar volumes of monkey tissue were taken from skin samples excised surgically 16-18 years following proton irradiation. Fibroblast cultures were initiated from the explants and were propagated in vitro until terminal senescence (cessation of cell division) occurred. Cultures from irradiated tissue exhibited decreases in doubling potential that were dependent on radiation dose and LET infinity and seemed to reflect damage to stem cell populations. The implications of these results for astronauts exposed to heavy ions and/or protons in space include possible manifestations of residual effects in the skin many years after exposure (e.g. unsatisfactory responses to trauma or surgery).     

M-correlated sweeps performance analysis of mean-level CFARprocessors in multiple target environments

This paper is devoted to the detection performance evaluation of the mean-level (ML) constant false-alarm rate (CFAR) detectors processing M-correlated sweeps in the presence of interfering targets. The consecutive pulses are assumed to be fluctuating according to the Swerling I model. Exact expressions are derived for the detection probability of the conventional mean-level detector (MLD) and its modified versions under Rayleigh fluctuating target model. Performance for independent sweeps can be easily obtained by setting the sweep-to-sweep correlation coefficient equal to zero. Results are obtained for both homogeneous and nonhomogeneous background environments. It is shown that for fixed M, the relative improvement over the single sweep case increases as the correlation between sweeps decreases. For the same parameter values, the minimum MLD has the best performance in the presence of extraneous target returns among the reference noise samples     

Navier–Stokes solvers in European aircraft design

The paper gives a broad perspective of the progress made during the last 10 years in solving the Navier–Stokes equations and traces how this simulation technique went from being a specialized research topic to a practical engineering tool that design engineers use on a routine basis.

The scope is limited to Navier–Stokes solvers applied to industrial design of airframes with attention focused particularly on developments in Europe. An overview of the different Navier–Stokes codes used in Europe is given, and on-going developments are outlined.

The current state of progress is illustrated by computed steady and unsteady solutions to industrial problems, ranging from airfoil characteristics, flow around an isolated wing, to full aircraft configurations.

A discussion on the future industrial design environment is given, and developments in Europe towards a more integrated design approach with underlying concepts like ‘concurrent engineering (CE)’ and the ‘virtual product (VP)’ are summarized. The paper concludes with a discussion on future challenging applications.     

PWM converter with low stresses and zero capacitive turn-on losses

A buck converter operating at constant switching frequency, whose active switches and recovery diode commutate at zero-voltage-switching (ZVS), with zero capacitive turn-on losses, is proposed. By using the parasitic capacitances of the switches as resonant capacitors, multiresonance is created. The resonant stage takes place only after the resonant inductor has been discharged, thus avoiding a resonant current peak; the devices are subjected to the same stresses as their counterparts in conventional hard-switching converters. A high efficiency is obtained.     

Analysis of long duration flares

Yohkoh has observed many long duration events permitting a statistical study of the properties of these interesting events. We have selected ten flares for analysis which have durations between 5 and 20 hours, and size ranging from C to X GOES class. Employing the Soft X-ray Telescope, the Bragg Crystal Spectrometer, GOES spacecraft, and ground-based H data, we examine the morphology, temperature, emission measure, location of the hard X-ray source, non-thermal velocities and upflows of the plasma at different stages in the flare development. Our results are used to address the question of the energy source that maintains the hot plasma at temperatures of several million degrees for many hours.     

The on-board computer in diagnosis of satellite power unit

Diagnosis of a space thermoemission power unit incorporating a Topaz type reactor converter is hindered by the low potential of the measurement system. The lack of information is restored by computing from the measurement date. Examples of dynamic mode diagnosis with restoration of information on the field temperature is given. The power unit diagnosis algorithms are implemented in the onboard computer whose power is about 200,000 operations per second. Memory and computing requirements are determined from algorithms of different diagnosis degrees. Results in study of the necessary computer component redundancy are given for different models of system degradation. The redundancy level should insure that the nucleus of the computer system with a minimally necessary 4K-words memory remains in operation after three years into the mission.     

The evolution of massive stars; an observational viewpoint

The review is a discussion of observationally deduced values of the masses, mass-loss rates, temperatures, luminosities and element abundances for the most massive stars. The comparison of these quantities with theoretical calculations is also discussed, in terms of our present understanding of their evolution.