NTC技术在微动同步器标度因数的温度补偿中的应用

了微动同步器结构原理，用数学方法找出了温度对其标度因数产生影响的主要原因，温度对激磁线圈的铜阻有影响，从而最终将影响输出电压的大小，针对这一主要原因，采用ＮＴＣ物理方法进行补偿，取得了很好的实际效果。     

Field formation around negatively biased solar arrays in the LEO-plasma

Heavy emission caused by impacting plasma ions results in a fast discharging effect of the initially large surface potentials on the dielectric solar cells. This eventually counteracts the energization process of the plasma ions to the cover glasses and leaves no significant electric fields. Thus, with an existing thermal plasma, electrons are again able to reach dielectric surfaces. Strong localized electric fields of the order of several 10 kV/cm form near the interconnector-cover glass interface.     

人体分层媒质内的微波聚焦场

本文是近年来在微波聚焦热疗人体深部癌病灶研究工作推动下完成的。文中给出了光学及电磁学界感兴趣的某些结果。在人体分层媒质前的一有限口径处,置一时谐电流分布,在每一分层内的微波传输场及反射场可利用传输矩阵及并矢格林函数给出计算结果。     

EUV emission from normal galaxies

Using data from the Wide Field Camera EUV all-sky survey, we have established upper limits to the EUV flux from a sample of 30 bright, nearby, non-active spiral galaxies. These galaxies were chosen to be those most likely to be detected in the EUV on the basis of (i) low interstellar absorption within our own galaxy, (ii) brightness in other wavebands, (iii) high star formation activity, and (iv) proximity. The derived EUV upper limits are restrictive, and establish for the first time that the EUV flux escaping from galaxies does not constitute a major component of their bolometric luminosity, and in particular that it cannot be the sink for the energy injected into the interstellar medium by supernova explosions, as had been suggested following the failure to detect this power in the X-ray band.     

求解含多个右端向量非对称线性方程组的自适应块拟最小残量IOM(q)算法

许多实际应用问题需要求解含多个右端向量的大型非对称线性方程组 ,通常是把原来方程组分成单独几个含一个右端向量的方程组 ,再用某种迭代法分别单个求解 ,而更加经济有效的方法是应用能同时产生几个迭代向量的块迭代法来直接求解。本文在 IOM(q)算法的基础上 ,提出一种求解此类方程组的块拟最小残量 IOM(q)算法 ,讨论了如何收缩掉已收敛的部分方程组以及如何从产生的块 Krylov序列中删除线性相关或几乎线性相关向量的自适应技术。数值试验表明 ,此新的自适应块算法比块 GMRES算法及其他相关算法具有更好的收敛行为、更少的计算量和 CPU计算时间 ,是求解此类方程组的一种更加经济有效的算法。     

质量管理体系建设必须与企业发展战略相适应

提出了质量管理体系建设中存在的问题和解决途径,对不同企业发展战略的质量管理体系进行了比较,指出了质量管理体系建设必须与企业发展战略相适应。     

激光气体氮化参量对TA2钛合金表面形态和硬度的影响

激光气体氮化TA2钛合金时,氮化区表面形态和硬度受激光加工参量影响很大。在不同的激光氮化参量作用下,氮化区内熔体的对流形式和程度不同,使TA2钛合金表面形态呈现不同的特征。激光氮化后,TA2钛合金表面硬度提高。氮化区域内生成硬质相TiN是TA2钛合金表面硬度得到提高的主要原因。     

液冷头盔致冷效能的医学研究

在45℃高温条件下,应用液冷头盔给10名被试者的头颈部致冷,散热效能较高,可带走安静时30.9％～48.3％的代谢产热。降低身体的热蓄积,减少出汗,减慢心率、直肠温度和皮肤温度的上升速率。对头颈部致冷可降低身体的热紧张度50％～70％,明显改善对温热的舒适感觉。同时表明,致冷液温、流量及液流走向,对致冷效能均有显著影响。为液冷头盔及致冷装置的设计,提供了医学实验依据。     

A bistatic SAR mission for earth observation based on a small satellite

The authors present a new scientific space mission consisting of a satellite carrying a receiving- only SAR which receives the signal transmitted by the ENVISAT-1 SAR. The integration of ENVISAT-1 SAR and bistatic radar data offers an improved potentiality of surface classification, three-dimensional observation, and the opportunity of advanced scientific experiments in the field of bistatic scattering. The small satellite nominal orbit and the attitude manoeuvres are designed in order to maintain an adequate overlap between the two radar swaths along the whole orbit, taking into account the ENVISAT-1 attitude and pointing. A preliminary satellite design (2-year lifetime) is then performed to evaluate the orbit decay and to determine the appropriate orbit manoeuvres (every 4 days) to control the satellites relative phase. The numerical simulation shows that a spacecraft of about 584kg is able to meet the mission requirements.     

塑性动态断裂过程中梁的塑性铰转动因子的确定方法

运用理论分析方法和实测试验方法，探讨了梁在塑性动态断裂过程中，其塑性铰转动因子的变化规律，提出了断裂过程中塑性铰几何转动因子的概念及其确定方法，并以３点弯曲梁理论分析解为例，计算了梁在塑性动态断裂过程中，其塑性铰转动因子的变化规律。该计算结果与３点弯曲梁动态断理解实验实测相一致。理论分析进一步明确了梁的塑性铰转动因子具有几何与物理两种不同的本质含意，并可直接用于修正梁的塑性动态断裂的理论分析解。