用于高压动态校准的快开阀装置

介绍一种高压快开阀装置。它可产生３７０ＭＰａ上升时间小于２０μｓ的阶跃压力，用于对高压传感器进行动态校准。     

GPS based onboard and onground orbit operations for small satellites

In extension to common applications such as groundtrack displays and antenna steering, the SGP4 orbit model is proposed for operational orbit determination in small satellite missions. SGP4 is an analytical orbit model for Low-Earth orbiting satellites that is widely used for the propagation of NORAD twoline elements. Twoline elements may hence be generated completely independent of NORAD. Their use as exclusive source of orbital information simplifies the operations concept and reduces mission costs through the extensive use of existing low-cost mission support software. Due to small computer resource requirements of 8–10kByte, the SGP4 model may also be applied for onboard orbit computations making use of e.g. a 80186 processor, thus ensuring full compatibility of ground-based and onboard operations. The proposed approach is particularly suited in combination with a space-borne GPS receiver, were the C/A-code navigation solutions are treated as measurements that are adjusted in a least-squares sense using the SGP4 model. As consequence, inherent drawbacks of the pure navigation solutions such as data gaps and scatter as well as limited velocity accuracy are avoided, while the operational navigation activities are kept at a minimum. The feasibility of the concept is illustrated based on real GPS navigation data from the TOPEX/Poseidon and the MIR space station with an inherent data quality of 50–100 m. It is shown that 3 hours of data within a 4 day period are sufficient to keep the position error within 4 km, that is considered sufficient for most applications.     

气动力星座保持的闭环控制研究

本文研究了利用气动力进行星座保持的闭环控制问题。提出了一种改进的半全局指数收敛闭环控制律，对于指定的任意大的有界域，利用不变集定理论上证明了该控制律的稳定性和抗干扰性，又提出了双ε法以提高响应速度。     

三轴稳定遥感卫星姿控系统故障情况下的系统重构

论述三轴对地稳定遥感卫星姿控系统中部分轮子或部分陀螺故障情况下的姿控系统重构。文中论述了只在俯仰通道有一偏置动量轮正常工作，而滚动和偏航通道轮子故障条件下的系统重构。另外还论述了偏航陀螺故障，姿控系统其它部件正常情况下，控制系统采用Whecon原理与PIM控制相结合的设计。以上两种系统重构拟用于实际系统中，经过数学仿真验证，姿控系统在故障情况下能够完成基本任务。     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

集中涡的细微结构和破裂机理初探

本文利用微分方程定性理论和分叉的基本概念,证明了在轴向逆压梯度时集中涡截面流态是一个附着螺旋点,且存在至少一个极限环。破裂截面上的流态对应于一个退化结点。由此推出破裂时有V_θ/r|_(r=o)=0。通过分析认为,涡破裂是由于涡轴上轴向逆压梯度的扰动自动放大造成的。     

Flutter analysis of an airfoil with bounded random parameters in incompressible flow via Gegenbauer polynomial approximation

The effects of parameter uncertainty on the flutter characteristics of a two-dimensional airfoil in an incompressible flow were investigated through Gegenbauer polynomial approximation. The uncertain parameters, such as the linear and cubic pitch stiffness coefficients are modeled as bounded random variables with λ-PDFs (probability density functions). With the aid of Gegenbauer polynomial approximation, the two-dimensional stochastic airfoil system is transformed at first into its equivalent deterministic one. Then the Hopf-bifurcation point is determined through the equivalent deterministic system, and the onset of the flutter, together with the flutter frequency against the probability density distribution parameter and the intensity of the random variable is explored. In addition, the ranges of the peak pitch and plunge responses against the flight speed and the PDFs of the peak pitch response are obtained. Numerical results show how the probability density distribution parameters and the intensities of random parameters affect the flutter onset speed, flutter angular frequency, the upper and lower boundaries of peak responses, and the PDFs of peak responses.     

逆向工程的关键技术及其研究

综述了逆向工程中实物数字化技术、测量数据的预处理、曲面重建技术、重构曲面的评价和检验等关键技术的发展现状和存在的问题,并对今后的发展方向进行了讨论。     

项目教学法在《微机系统实现与维护》课程教学中的应用探索

项目教学法突破传统的教学模式,在参与项目完成的过程中学生能更好、更快地掌握所学知识,学习的积极性和主动性大大提高。本文将项目教学法的学习模式引入到高职高专的《微机系统实现与维护》课程教学中,对如何把理论与实践有机地结合,如何提高学生的技能水平作了一定的探索。     

Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.