超声马达工作性能影响因素的研究

系统阐述在超声马达的设计、制作过程中的机构设计、制作工艺、驱动电源等方面的关键问题。重点讨论超声振子的粘接技术,振子参数优化设计的方法,以及驱动电源的匹配和频率自动跟踪设计,最终设计出高性能的超声马达。     

基于特征模型的全系数自适应控制系统稳定性研究

讨论了基于特征模型的黄金分割加逻辑微分自适应控制律组成闭环系统的稳定性问题。针对参数未知、线性定常或慢时变的二阶不稳定对象,本文给出了在采样周期满足一定条件下,上述闭环系统渐近稳定的充分条件,其中包含对于时变参数变化范围和非线性阻尼系数的约束条件。     

空间能量粒子探测方法研究

阐述了空间能量粒子探测的原理和方法。介绍了国外在能量粒子探测方面所采用的半导体望远镜测量法、电场加速法、磁偏转法等方法，分析了它们各自的优缺点。就制约能量粒子探测技术发展的关键因素进行了讨论。并以此为基础，结合我国实际情况提出了一种新的探测方法。     

企业经济效益综合评价与分级管理方法

本文针对财政部设计的企业经济效益评价指标体系，用多目标优化方法的思想对其进行优化处理，并且数理统计方法将各指标值折算成分数以符合人们的习惯；同时，用数理分析等方法将所得的评价序列进行分级归类管理。     

广播内存实时网节点卡的LabVIEW驱动开发

广播内存实时网技术是一种高效的网络数据传输技术。本文向读者介绍了LabVIEW环境下利用CIN技术的网络内存节点卡驱动模块的设计方法。     

1/spl phi/ 3W grid-connection PV power inverter with partial active power filter

This paper presents a single-phase three-wire (1/spl phi/ 3W) grid-connection photovoltaic (PV) power inverter with a of partial active power filter (PAPF) feature, which can not only deal with PV power but filter current harmonics and improve power factor. Once the processed power exceeds the switch ratings, the inverter can reduce its output reactive power and harmonic power, while still supplying the maximum real power generated by the PV arrays. In the derivation of control laws, a limit circle is defined to confine the output power of the inverter. To determine the power that the inverter can process, the instantaneous reactive power of a 1/spl phi/ 3W system is defined and used to calculate reactive power, which can avoid complex detections of phase angle and magnitude of the fundamental component of a nonlinear load current. Simulation results and experimental measurements have verified the proposed algorithm and the feasibility of the inverter.     

职业指导教师与高职高专院校建设

职业指导工作是高职高专院校目前亟待发展,同时又面临诸多问题的一项工作。要完善职业指导工作,首先要建设一支从事职业指导工作的教师队伍。本文从学校、学生和社会三个角度出发论述了职业指导教师队伍建设在高职高专建设中的必要性。     

Aperture error mitigation via local-state estimation for frequency-based emitter location

This paper considers the problem of locating a stationary coherent emitter via a single moving platform making frequency measurements in the presence of aperture state uncertainty. It is shown that the estimated emitter location is most sensitive to the receiving aperture velocity uncertainty. The required aperture velocity accuracy is determined through a noninfinitesimal perturbation analysis. A solution to location accuracy enhancement with a minimal hardware addition is attempted. It is shown that this can be achieved by mounting a high-resolution tri-axis microelectromechanical systems (MEMS) accelerometer at the aperture to measure its velocity, which can deviate significantly from that estimated by the on-board navigation system. The Doppler shifts of the GPS signal carrier frequency, whenever it can be acquired through the aperture, are also considered as a way to aid the aperture velocity measurement. A decentralized, federated processing method for the aperture velocity estimate referenced at the aperture, integrating all measurement data, is presented. An upper bound for the error of aperture velocity estimate is derived. The potential for significant accuracy enhancement for emitter location is demonstrated.     

数字式射击瞄准计算机设计与实现

某型射击军械系统的射瞄计算机原采用模拟机电式技术实现,存在体积大、功耗大、可靠性及可维护性差等缺点,因此,使用数字式计算机技术对其进行升级改造势在必行.本文首先对原系统的火控原理及火控构型的进行了分析;其次,介绍了射击瞄准计算机的对外接口关系.重点介绍了数字式射击瞄准计算机的采样解算时间的确定、计算方法的选取及接口设计等内容.本文所设计的数字式射击瞄准计算机已通过了系统验证并得到了使用,克服了原有系统所存在的固有缺点.文中的设计思想与所用的工程方法对类似武器系统的升级改造有所借鉴.     

无人机自由编队飞行的补偿模糊神经网络控制

为了克服当前提出的无人机编队飞行的不足，提出一种新的无人机编队飞行概念——自由编队飞行，制定了相关的避让规则，用补偿模糊神经网络进行训练，实现自由编队飞行的补偿模糊神经网络控制。仿真显示，编队飞行的飞机能按照规则自主改变航路进行避让，表明了该方法的有效性。