Metric radio bursts and fine structures observed on 17 January, 2005

A complex radio event was observed on January 17, 2005 with the radio-spectrograph ARTEMIS-IV, operating at Thermopylae, Greece; it was associated with an X3.8 SXR flare and two fast Halo CMEs in close succession. We present dynamic spectra of this event; the high time resolution (1/100 s) of the data in the 450–270 MHz range, makes possible the detection and analysis of the fine structure which this major radio event exhibits. The fine structure was found to match, almost, the comprehensive Ondrejov Catalogue which it refers to the spectral range 0.8–2 GHz, yet seems to produce similar fine structure with the metric range.     

Wave emissions at half electron gyroharmonics in the equatorial plasmasphere region: CLUSTER observations and statistics

Intense (n + 1/2) f_ce emissions are a common phenomenon observed in the terrestrial inner magnetosphere. One of their interests is their possible effect in the pitch angle scattering of plasmasheet keV-electron, leading to diffuse auroras. In this paper, we present CLUSTER’s point of view about this topic, in the equatorial region of the plasmasphere, via a statistical study using 3 years of data. Spectral characteristics of these waves, which represent an important clue concerning their generation mechanism, are obtained using WHISPER data near perigee. Details on the wave spectral signature are shown in an event study, in particular their splitting in fine frequency bands. The orbit configuration of the four spacecraft offers a complete sampling on all MLT sectors. A higher occurrence rate of the emissions in the dawn sector and their confinement to the geomagnetic equator, pointed out in previous studies, are confirmed and described with additional details. The proximity of emission sites, both to the plasmapause layer and to the geomagnetic equator surface, seems to be of great importance in the behaviour of the (n + 1/2) f_ce wave characteristics. Our study indicates for the first time, that both the intensity of (n + 1/2) f_ce emissions, and the number of harmonic bands they cover, are increasing as the observation point is located further away outside from the plasmapause layer. Moreover, a study of the wave intensity in the first harmonic band (near 3/2 f_ce) shows higher amplitude for these emissions than previous published values, these emissions can play a role in the scattering of hot electrons. Finally, geomagnetic activity influence, studied via time series of the D_st index preceding observations, indicates that (n + 1/2) f_ce emission events are observed at CLUSTER position under moderate geomagnetic activity conditions, no specific D_st time variation being required.     

Investigations on temperature distribution of satellite surfaces affected by solar absorptivity

Based on the Monte Carlo ray-tracing method, the network coefficients of thermal network model describing the radiation heat transfer among satellite surfaces is solved by considering the surface material optical characters. It is superiority to the conventional Gebhart’s method in view of the grey body and the diffuse reflection assumptions. The zone leveling method is used to discrete the governing equations and the solar absorpivity is separated and considered to be an important correction parameter. Effects of the solar incidence round angle, the zenith angle and the ratio of absorpivity to emissivity (RAE) on temperature distribution are numerically simulated and discussed in detail. The higher or the lower the RAE may be lead to the alternative heating and cooling tend with a larger heating or cooling velocity of main body surfaces than the solar array surfaces. Furthermore, maximum temperature of main body is almost larger than solar arrays. Under the same RAE, solar incidence angle make a great effect on the uniform character of temperature distribution.     

The Relativistic Electron-Proton Telescope (REPT) Instrument on Board the Radiation Belt Storm Probes (RBSP) Spacecraft: Characterization of Earth’s Radiation Belt High-Energy Particle Populations

Particle acceleration and loss in the million electron Volt (MeV) energy range (and above) is the least understood aspect of radiation belt science. In order to measure cleanly and separately both the energetic electron and energetic proton components, there is a need for a carefully designed detector system. The Relativistic Electron-Proton Telescope (REPT) on board the Radiation Belt Storm Probe (RBSP) pair of spacecraft consists of a stack of high-performance silicon solid-state detectors in a telescope configuration, a collimation aperture, and a thick case surrounding the detector stack to shield the sensors from penetrating radiation and bremsstrahlung. The instrument points perpendicular to the spin axis of the spacecraft and measures high-energy electrons (up to ～20 MeV) with excellent sensitivity and also measures magnetospheric and solar protons to energies well above E=100 MeV. The instrument has a large geometric factor (g=0.2 cm²?sr) to get reasonable count rates (above background) at the higher energies and yet will not saturate at the lower energy ranges. There must be fast enough electronics to avert undue dead-time limitations and chance coincidence effects. The key goal for the REPT design is to measure the directional electron intensities (in the range 10^?2–10⁶ particles/cm²?s?sr?MeV) and energy spectra (ΔE/E～25 %) throughout the slot and outer radiation belt region. Present simulations and detailed laboratory calibrations show that an excellent design has been attained for the RBSP needs. We describe the engineering design, operational approaches, science objectives, and planned data products for REPT.     

Coordinate Conversion and Tracking for Very Long Range Radars

The problem of tracking with very long range radars is studied in this paper. First, the measurement conversion from a radar's r-u-v coordinate system to the Cartesian coordinate system is discussed. Although the nonlinearity of this coordinate transformation appears insignificant based on the evaluation of the bias of the converted measurements, it is shown that this nonlinearity can cause significant covariance inconsistency in the conventionally converted measurements (CM1). Since data association depends critically on filter consistency, this issue is very important. Following this, it is shown that a suitably corrected conversion (CM2) eliminates the inconsistency. Then, initialized with the converted measurements (using CM2), four Cartesian filters are evaluated. It is shown that, among these filters, the converted measurement Kalman filter with second order Taylor expansion (CM2KF) is the only one that is consistent for very long range tracking scenarios. Another two approaches, the range-direction-cosine extended Kalman filter (ruvEKF) and the unscented Kalman filter (UKF) are also evaluated and shown to suffer from consistency problems. However, the CM2KF has the disadvantage of reduced accuracy in the range direction. To fix this problem, a consistency-based modification for the standard extended Kalman filter (E1KF) is proposed. This leads to a new filtering approach, designated as measurement covariance adaptive extended Kalman filter (MCAEKF). For very long range tracking scenarios, the MCAEKF is shown to produce consistent filtering results and be able to avoid the loss of accuracy in the range direction. It is also shown that the MCAEKF meets the posterior Carmer-Rao lower bound for the scenarios considered.     

Accumulation of stress protein 72 (HSP72) in muscle and spleen of goldfish taken into space.

Using Western blot analysis, here, we report the levels of HSP72 in several organs from goldfish which were taken into space on the NASA space shuttle. A remarkable accumulation of HSP72 was detected in muscle and spleen of those fish taken into space as compared with controls. These results suggested that the HSP72 induction is a kind of stress response at the molecular level introduced by the space environment consisting of microgravity and/or cosmic radiation as stressors.     

Generation mechanism of the whistler-mode waves in the plasma sheet prior to magnetic reconnection

The whistler-mode waves and electron temperature anisotropy play a key role prior to and during magnetic reconnection. On August 21, 2002, the Cluster spacecrafts encountered a quasi-collisionless magnetic reconnection event when they crossed the plasma sheet. Prior to the southward turning of magnetospheric magnetic field and high speed ion flow, the whistler-mode waves and positive electron temperature anisotropy are simultaneously observed. Theoretic analysis shows that the electrons with positive temperature anisotropy can excite the whistler-mode waves via cyclotron resonances. Using the data of particles and magnetic field, we estimated the whistler-mode wave growth rate and the ratio of whistler-mode growth rate to wave frequency. They are 0.0016f_ce (Electron cyclotron frequency) and 0.0086f_ce, respectively. Therefore the whistler-mode waves can grow quickly in the current sheet. The combined observations of energetic electron beams and waves show that after the southward turning of magnetic field, energetic electrons in the reconnection process are accelerated by the whistler-mode waves.     

Pseudo-tomographic X-ray imaging for use in aviation security

This paper presents recent results obtained from a 3-D image modelling technique utilising line-scan X-ray equipment. The resultant images have properties similar to those obtained from a volume rendered X-ray computed tomography (CT) system     

Development of a CELSS Experimental Facility

A CELSS Experimental Facility was developed two years ago. It contains a volume of about 40.0 m³ and a cultivating area of about 8.4 m²; its interior atmospheric parameters such as temperature, relative humidity, oxygen concentration, carbon dioxide concentration, total pressure, lighting intensity, photoperiod, water content in the growing-matrix, CO₂-added accumulative amount, O₂-released accumulative amount and ethylene concentration are all controlled and logged automatically and effectively; its growing system consists of two rows of racks along its left-and-right sides separately, each side holds two upper-and-lower layers, and the vertical distance of each growing bed can be adjusted automatically and independently; lighting sources consist of both red (95%) and blue (5%) light-emitting diodes (LED), and the average lighting intensity of each lamp bank at 20-cm distance position under it, reaches to 255.0 μmol m⁻² s⁻¹. After that, demonstrating tests were carried out and were finally followed by growing lettuce in the facility. The results showed that all subsystems operated well and all parameters were controlled automatically and efficiently. The lettuce plants in the system could grow much well. Successful development of this system laid a necessary foundation for future larger-scale studies on CELSS integration technique.     

Multiple-model estimation with variable structure. V. Likely-modelset algorithm

For pt. IV see ibid., vol. 35, no. 1, p. 242-254 (1999). A multiple-model (MM) estimator with a variable structure, called likely-model set (LMS) algorithm, is presented, which is generally applicable to most hybrid estimation problems and is easily implementable. It uses a set of models that are not unlikely to match the system mode in effect at any given time. Different versions of the algorithm are discussed. The model set is made adaptive in the simplest version by deleting all unlikely models and activating all models to which a principal model may jump so as to anticipate the possible system mode transitions. The generality, simplicity, and ease in the design and implementation of the LMS estimator are illustrated via an example of tracking a maneuvering target and an example of fault detection and identification. Comparison of its cost-effectiveness with other fixed- and variable-structure MM estimators is given