Application of hyperspectral infrared analysis of hydrothermal alteration on Earth and Mars

An integrated analysis of both airborne and field short-wave infrared hyperspectral measurements was used in conjunction with conventional field mapping techniques to map hydrothermal alteration in the central portion of the Mount Painter Inlier in the Flinders Ranges, South Australia. The airborne hyperspectral data show the spatial distribution of spectrally distinct minerals occurring as primary minerals and as weathering and alteration products. Field spectral measurements, taken with a portable infrared mineral analyzer spectrometer and supported by thin-section analyses, were used to verify the mineral maps and enhance the level of information obtainable from the airborne data. Hydrothermal alteration zones were identified and mapped separately from the background weathering signals. A main zone of alteration, coinciding with the Paralana Fault zone, was recognized, and found to contain kaolinite, muscovite, biotite, and K-feldspar. A small spectral variation associated with a ring-like feature around Mount Painter was tentatively determined to be halloysite and interpreted to represent a separate hydrothermal fluid and fluid source, and probably a separate system. The older parts of the alteration system are tentatively dated as Permo-Carboniferous. The remote sensing of alteration at Mount Painter confirms that hyperspectral imaging techniques can produce accurate mineralogical maps with significant details that can be used to identify and map hydrothermal activity. Application of hyperspectral surveys such as that conducted at Mount Painter would be likely to provide similar detail about putative hydrothermal deposits on Mars.     

Mercury’s Atmosphere: A Surface-Bounded Exosphere

The existence of a surface-bounded exosphere about Mercury was discovered through the Mariner 10 airglow and occultation experiments. Most of what is currently known or understood about this very tenuous atmosphere, however, comes from ground-based telescopic observations. It is likely that only a subset of the exospheric constituents have been identified, but their variable abundance with location, time, and space weather events demonstrate that Mercury’s exosphere is part of a complex system involving the planet’s surface, magnetosphere, and the surrounding space environment (the solar wind and interplanetary magnetic field). This paper reviews the current hypotheses and supporting observations concerning the processes that form and support the exosphere. The outstanding questions and issues regarding Mercury’s exosphere stem from our current lack of knowledge concerning the surface composition, the magnetic field behavior within the local space environment, and the character of the local space environment.     

The Cassini Ion and Neutral Mass Spectrometer (INMS) Investigation

The Cassini Ion and Neutral Mass Spectrometer (INMS) investigation will determine the mass composition and number densities of neutral species and low-energy ions in key regions of the Saturn system. The primary focus of the INMS investigation is on the composition and structure of Titan’s upper atmosphere and its interaction with Saturn’s magnetospheric plasma. Of particular interest is the high-altitude region, between 900 and 1000 km, where the methane and nitrogen photochemistry is initiated that leads to the creation of complex hydrocarbons and nitriles that may eventually precipitate onto the moon’s surface to form hydrocarbon–nitrile lakes or oceans. The investigation is also focused on the neutral and plasma environments of Saturn’s ring system and icy moons and on the identification of positive ions and neutral species in Saturn’s inner magnetosphere. Measurement of material sputtered from the satellites and the rings by magnetospheric charged particle and micrometeorite bombardment is expected to provide information about the formation of the giant neutral cloud of water molecules and water products that surrounds Saturn out to a distance of ∼12 planetary radii and about the genesis and evolution of the rings.The INMS instrument consists of a closed ion source and an open ion source, various focusing lenses, an electrostatic quadrupole switching lens, a radio frequency quadrupole mass analyzer, two secondary electron multiplier detectors, and the associated supporting electronics and power supply systems. The INMS will be operated in three different modes: a closed source neutral mode, for the measurement of non-reactive neutrals such as N₂ and CH₄; an open source neutral mode, for reactive neutrals such as atomic nitrogen; and an open source ion mode, for positive ions with energies less than 100 eV. Instrument sensitivity is greatest in the first mode, because the ram pressure of the inflowing gas can be used to enhance the density of the sampled non-reactive neutrals in the closed source antechamber. In this mode, neutral species with concentrations on the order of ≥10⁴ cm⁻³ will be detected (compared with ≥10⁵ cm⁻³ in the open source neutral mode). For ions the detection threshold is on the order of 10⁻² cm⁻³ at Titan relative velocity (6 km sec⁻¹). The INMS instrument has a mass range of 1–99 Daltons and a mass resolutionM/ΔM of 100 at 10% of the mass peak height, which will allow detection of heavier hydrocarbon species and of possible cyclic hydrocarbons such as C₆H₆.The INMS instrument was built by a team of engineers and scientists working at NASA’s Goddard Space Flight Center (Planetary Atmospheres Laboratory) and the University of Michigan (Space Physics Research Laboratory). INMS development and fabrication were directed by Dr. Hasso B. Niemann (Goddard Space Flight Center). The instrument is operated by a Science Team, which is also responsible for data analysis and distribution. The INMS Science Team is led by Dr. J. Hunter Waite, Jr. (University of Michigan).This revised version was published online in July 2005 with a corrected cover date.     

Flight Test Evaluation of a New GPS Attitude Determination Algorithm

A new Global Positioning System (GPS) Attitude Determination Algorithm (GADA) is proposed, featuring the capability to keep its accuracy, even when the line-of-sight angle (LOS) of a given satellite vehicle (SV) is below the GPS horizontal antenna plane (HAP). The GADA model has been developed and evaluated through simulations and flight test campaigns, which comprised static and dynamic flight profiles, to best characterize the algorithm performance. As attitude reference a complete flight tests instrumentation (FTI) system was integrated into the testbed for the flight test campaign. The attitude measurements given by GADA and REQUEST algorithms are compared with those given by FTI (i.e., reference system). The results show that GADA accuracy is significantly better than that of REQUEST, for all flight conditions.     

Direct observation of processes in a solidifying dispersion

The evolution of a dispersion under the action of temperature gradients and solidification was followed optically in a transparent molten salt (CsCl) with inclusions of Pb-droplets and gas bubbles. This system is believed to model a solidifying metallic alloy. Rejection of Pb-particles by the solidification front was observed, while large gas bubbles were incorporated. Thermocapillary convection at the gas bubbles considerably distorted the temperature field and even caused local remelting. Marangoni migration of bubbles was not observed, contrary to expectations.     

Analysis of the orbit lifetime of CubeSats in low Earth orbits including periodic variation in drag due to attitude motion

It is estimated that more than 22,300 human-made objects are in orbit around the Earth, with a total mass above 8,400,000 kg. Around 89% of these objects are non-operational and without control, which makes them to be considered orbital debris. These numbers consider only objects with dimensions larger than 10 cm. Besides those numbers, there are also about 2000 operational satellites in orbit nowadays. The space debris represents a hazard to operational satellites and to the space operations. A major concern is that this number is growing, due to new launches and particles generated by collisions. Another important point is that the development of CubeSats has increased exponentially in the last years, increasing the number of objects in space, mainly in the Low Earth Orbits (LEO). Due to the short operational time, CubeSats boost the debris population. One of the requirements for space debris mitigation in LEO is the limitation of the orbital lifetime of the satellites, which needs to be lower than 25 years. However, there are space debris with longer estimated decay time. In LEÓs, the influence of the atmospheric drag is the main orbital perturbation, and is used in maneuvers to increment the losses in the satellite orbital energy, to locate satellites in constellations and to accelerate the decay.The goal of the present research is to study the influence of aerodynamic rotational maneuver in the CubeSat?s orbital lifetime. The rotational axis is orthogonal to the orbital plane of the CubeSat, which generates variations in the ballistic coefficient along the trajectory. The maneuver is proposed to accelerate the decay and to mitigate orbital debris generated by non-operational CubeSats. The panel method is selected to determine the drag coefficient as a function of the flow incident angle and the spinning rate. The pressure distribution is integrated from the satellite faces at hypersonic rarefied flow to calculate the drag coefficient. The mathematical model considers the gravitational potential of the Earth and the deceleration due to drag. To analyze the effects of the rotation during the decay, multiple trajectories were propagated, comparing the results obtained assuming a constant drag coefficient with trajectories where the drag coefficient changes periodically. The initial perigees selected were lower than 400 km of altitude with eccentricities ranging from 0.00 to 0.02. Six values for the angular velocity were applied in the maneuver. The technique of rotating the spacecraft is an interesting solution to increase the orbit decay of a CubeSat without implementing additional de-orbit devices. Significant changes in the decay time are presented due to the increase of the mean drag coefficient calculated by the panel method, when the maneuver is applied, reducing the orbital lifetime, however the results are independent of the angular velocity of the satellite.     

Reliability comparison of matrix and other converter topologies

Several rectifier-inverter and matrix converter topologies suitable for aerospace applications are compared, and their reliability is predicted. The military handbook MIL-HDBK-217F guidelines have been used to predictreliability. The matrix converter has several attractive features for aerospace applications such as potential size and weight savings. Although the matrix converter has a higher number of semiconductor switches, they are subjected to a lower voltage stress, which decreases their failure rate. This results in the reliability indicators of the different converter topologies being very similar     

Observational evidence for the binary model of X-ray bursters

Most, but not all, theoretical models of X-ray bursters require a binary system consisting of a mass donating star and a neutron star. The observational evidence in support of this model, however, is both indirect and meager. We have detected absorption dips in the X-ray spectrum of the Burster MXB 1916-05 with the IPC and the MPC on the Einstein Observatory which occur with a binary period of 2985 seconds. These dips are shown to be the result of a gas stream emanating from a companion star and hence this data represents the first direct evidence of the binary nature of X-ray bursters. Detailed models of the interaction of the gas stream with the accretion disk are presented. A 22nd mag. optical candidate for the system has been found.     

Policy for robust space-based earth science,technology and applications

Satellite remote sensing technology has contributed to the transformation of multiple earth science domains, putting space observations at the forefront of innovation in earth science. With new satellite missions being launched every year, new types of earth science data are being incorporated into science models and decision-making systems in a broad array of organizations. Policy guidance can influence the degree to which user needs influence mission design and when, and ensure that satellite missions serve both the scientific and user communities without becoming unfocused and overly expensive. By considering the needs of the user community early on in the mission-design process, agencies can ensure that satellites meet the needs of multiple constituencies. This paper describes the mission development process in NASA and ESA and compares and contrasts the successes and challenges faced by these agencies as they try to balance science and applications within their missions.