塞式喷管单元发动机实验与数值模拟研究

简要介绍固体推进剂模拟塞式喷管单元发动机实验系统，给出了实验塞式喷管型面设计方法和特征线法在塞式喷管流场计算中的应用，癖结了实验研究结果，并同数值模拟计算结果进行了比较，主要结果包括燃烧室压力，底部气锥流量，内膨胀比，侧喷管倾角，底部压缩角等对塞式喷管性能的影响，并得出了塞式喷管单元发动机推力方向与其轴线方向夹角的高度特性。     

Transport Characteristics of Macroparticles in Dusty Plasma Induced by Solar Radiation under Microgravity Conditions

The transport characteristics of macroparticles, charged by the solar radiation under microgravity conditions, were investigated by analyzing the videorecords of experiments carried out onboard the Mirorbital station. The temperature, distributions of velocities, charge, friction coefficient, and diffusion coefficient were obtained for bronze particles.     

The Solution of Some Problems of Optimizing the Processes of a Flexible Correction of Motion of Satellite Systems: I

The first of a series of problems of the optimization of correction of satellite systems, moving over near-circular orbits, is considered. The correction is accomplished by means of low-thrust engines and is supposed to be flexible, where only the parameters of the relative motion of satellites must be corrected. The problem has a large dimension, but is invariant with respect to renumbering of satellites. This allows us to decompose the problem, i.e., to find new variables, linearly dependent on old ones, in which the problem breaks down into a series of independent subproblems of low dimension. The decomposition is accomplished by means of the technique [1] based on the theory of linear representations of groups.     

Radio Occultation Measurements of the Radio Wave Absorption and the Sulfuric Acid Vapor Content in the Atmosphere of Venus

The results of the determination of centimeter ( = 5 cm) radio waves absorption in the radio occultation experiments, carried out using the Venera-15and Venera-16spacecraft, are presented. The altitude distribution of the absorber substance is analyzed. The absorbing layer is shown to exist at altitudes of 64 to 58 km in the near-polar regions of the planet. At middle latitudes such an absorbing layer was not found. In the altitude range from 56 to 46 km the radio wave absorption by the sulfuric acid (H₂SO₄) vapor is observed. The content of the sulfuric acid vapor is shown to increase with decreasing altitude: in the mid-latitude region at altitudes of 56.7 and 53 km it equals 5 and 20 ppm, respectively, and at polar latitudes the same content of H₂SO₄vapor is observed at altitudes of 51.2 and 47 km, respectively. A comparison of these results with the data of radio wave absorption in the = 13 cm band, obtained in the Pioneer Venus Orbiterradio occultation experiments, leads to the conclusion that the obtained values of the sulfuric acid vapor content well agree in the regions of overlap of the data.     

Numerical Simulation of Impact Loading on Solid Propellant Within an Orthotropic Shell

The strain–stress state of the solid propellant rocket engines (SPREs) is simulated under impact. The effect of orientation of elastic and strength properties of orthotropic organoplastic shell material on the strain–stress state of the solid propellant is investigated. Normal and oblique impact of single steel cylinder projectiles, both simultaneous and at different times of multiple, converging steel spheric particles with SPRE are investigated in this study. The investigation is conducted numerically. The numerical modeling was carried out in a three-dimensional formulation by the method of finite elements for the continuous approach of the mechanics of a deformable solid. The destruction of the anisotropic material is described by the tensor-polynomial criterion of the fourth degree, which takes into account the influence of hydrostatic pressure.     

机载雷达发展历程及未来趋势

概述了机载雷达技术发展的基本情况,总结出有源相控阵雷达相对于传统的机械雷达所具有的独特优势,指出有源相控阵雷达是未来机载雷达的一个发展方向。     

基于双目视觉的返回舱着陆横向速度测量

通过分析返回舱在着陆时所具有的水平速度也可能对着陆安全构成威胁的事实，论述了为返回舱增加横向缓冲装置的必要性，由此提出亟需解决的问题——在返回舱着陆下降过程中测量其水平运动速度。提出了全新概念的以视觉图像为唯一信息来源的返回舱水平速度测量方法，仅以双目摄像机系统作为传感器，避免了对返回舱原有传感器系统的改造。通过对着陆区域地面图像的采集和在线处理，利用双目交会测量原理得到返回舱当前的大地坐标和姿态。仿真实验证明，方法简单易行，测量结果可靠。     

On the dynamics of a novel manipulator with slewing and deployable links

Using a novel space platform-based manipulator with slewing and deployable links, the paper addresses two issues of considerable importance: (a) How important is it to model flexibility of the system? (b) How many modes are needed to adequately represent the elastic character? Results suggest that the fundamental mode is able to capture physics of the response quite accurately. Due to its massive character, the platform dynamics is virtually unaffected, even by severe maneuvers of the manipulator. Hence, treating the platform as rigid would save the computational cost without affecting the accuracy. Although the link flexibility does affect the manipulator's tip vibration, the joint and platform vibrations remain negligible. The revolute joint flexibility appears to be an important parameter affecting both the joint as well as tip responses. The information should prove useful in the design of this new class of manipulators.     

Influence of Trapped Plasma on the Structure of Collisionless Thin Current Sheets

Using both analytical and numerical models of the collisionless anisotropic current sheet generated by the impinging flows of transient ions, we have studied the self-consistent solutions taking the plasma trapped in the sheet into account. It is demonstrated that there exists a limited window in the space of system parameters where self-consistent solutions can exist. When the density of the quasi-trapped plasma is sufficiently large, a redistribution of the total current can be a cause of the sheet decay, when the local current of the trapped particles compensate (totally or in part) the main current in the center and at the edges of the sheet, while the total current generated by ions on the trapped trajectories vanishes.     

Using the PROGRESS transport spacecraft in structure of the International Space Station for realization of scientific experiments under microgravity conditions

The problem is considered of using the PROGRESS transport spacecraft, which will deliver the payload on the ISS, as a free flying platform for realization of space experiments. For maintenance of the ISS 5-6 PROGRESS flights per year are planned. Usually after delivery of the payload the PROGRESS undocks from the ISS and burns down in the Earth atmosphere. However, the operating conditions of its onboard systems allow to prolong operation and to make free flight near to the station and repeatedly to be docked to it. It is offered to use this possibility for performing experiments on Material Science.