Global ionospheric scintillations revealed by GPS radio occultation data with FY3C satellite before midnight during the March 2015 storm

Global observations of S4 amplitude scintillation index by the GPS Occultation Sounder (GNOS) on FengYun-3 C (FY3C) satellite reveal global dynamic patterns of a strong pre-midnight scintillations in F-region of the ionosphere during the St. Patrick’s Day geomagnetic super storm of 17–19 March 2015. The observed strong scintillations mainly occurred in the low latitudes, caused by equatorial plasma bubbles. During the main storm phase (March 17), the scintillations were first triggered in the New Zealand sector near 160°E longitudes, extending beyond 40°S dip latitude. They were also enhanced in the Indian sector, but significantly suppressed in East Asia near 120°E longitude and in Africa around 30°E longitude. During the initial recovery phase (March 18–19), the global scintillations were seldom observed in GNOS data. During the later recovery phase (after March 19), the scintillations recovered to the pre-storm level in Indian, African, and American sectors, but not in East Asian and any of Pacific sectors. These results closely correlate with observations of the density depletion structures by the Communication/Navigation Outage Forecasting System (C/NOFS) satellite, and ground-based instruments. Such consistency indicates reliability of our scintillation sensing approach even in a case-by-case comparison study. The prompt penetration electric field and disturbance dynamo electric field are suggested as the main factors that control the enhancement and inhibition of the scintillations during the storm, respectively.     

航空发动机复杂型面罩子钣充液成形技术

利用先进的钣材冲压计算机仿真技术对零件成形中的关键问题进行了研究,并通过先进的充液成形技术进行了实际零件的成形试验,试验的结果与模拟结果基本一致。最后应用模拟得到的成形参数,利用钣充液成形工艺成形出了合格的零件。     

Low C/N_0 Carrier Tracking Loop Based on Optimal Estimation Algorithm in GPS Software Receivers

Suppressing jitter noises in a phase locked loop(PLL) is of great importance in order to keep precise and continuous track of global positioning system(GPS) signals characterized by low carrier-to-noise ratio(C/N0).This article proposes and analyzes an improved Kalman-filter-based PLL to process weak carrier signals in GPS software receivers.After reviewing the optimal-bandwidth-based traditional second-order PLL,a Kalman-filter-based estimation algorithm is implemented for the new PLL by decorrelating the model error noises and the measurement noises.Finally,the efficiency of this new Kalman-filter-based PLL is verified by experimental data.Compared to the traditional second-order PLL,this new PLL is in position to make correct estimation of the carrier phase differences and Doppler shifts with less overshoots and noise disturbances and keeps an effective check on the disturbances out of jitter noises in PLL.The results show that during processing normal signals,this improved PLL reduces the standard deviation from 0.010 69 cycle to 0.007 63 cycle,and for weak signal processing,the phase jitter range and the Doppler shifts can be controlled within ±17° and ±5Hz as against ±25° and ±15 Hz by the traditional PLL.     

航天器总装中的数字化工厂技术

简要介绍了数字化工厂技术的国内外现状,阐述了数字化工厂技术依赖的技术基础,分析了数字化工厂技术在航天器总装中的实施要点,指出了数字化工厂技术对提高航天器研制的批产能力和产业化能力的积极意义。     

飞机制造过程中的MBOM实现技术

根据我国飞机制造企业的实际需求,从分析MBOM的形成入手,同时指出EBOM是MBOM的源头,AO、FO是MBOM的基本特征;然后以此为出发点.提出基于工艺核心制造流程构建MBOM技术及其相关管理技术;最后实现面向集成、以MBOM为核心的CAPP与ERP的无缝链接.     

基于CATIA V5的自动钻铆机托架变形研究

探讨了大型自动钻铆机托架系统的变形机理及其影响.研发了基于CATIA V5的托架变形补偿技术及变形模拟系统,可对变形量在加工过程实施实时修补,有效地解决了自动钻铆机大型托架的变形问题并已成功应用于ARJ21的机翼壁板的生产.     

直径比对冲击气膜组合冷却流动与换热的影响

 通过数值模拟,研究了涡轮叶片弦中区所采用的新型双层腔冷却结构的冷却特性,系统分析了冲击气膜组合冷却的流动与换热特性,讨论了冷气进口雷诺数Re、吹风比M以及气膜孔与冲击孔的直径比D/d对组合冷却效果的影响。计算参数范围是：冷气进口雷诺数Re＝2 000～5 000,吹风比M＝0.6～2.0。计算结果表明, 冷气进口Re,M以及D/d对双层腔结构冷却效果的影响非常明显,在计算范围内:（1）Re和M越高,冷却效果越好;（2）当冲击孔直径一定时,增加气膜孔的直径,冷却效果会随之增加;（3）当冲击孔直径一定时,增加气膜孔的直径,流阻系数会随之减小。     

电磁开关壳体螺栓焊的研究

提出了螺栓焊的新机理和螺栓设计原则。设计了电磁开关壳体螺栓焊的焊接模具;探讨了焊接工艺,工件表面状态对焊接质量和可靠性的影响与改进措施。     

Fast Online Approximation for Hard Support Vector Regression and Its Application to Analytical Redundancy for Aeroengines

The hard support vector regression attracts little attention owing to the overfitting phenomenon. Recently, a fast offline method has been proposed to approximately train the hard support vector regression with the generation performance comparable to the soft support vector regression. Based on this achievement, this article advances a fast online approximation called the hard support vector regression (FOAHSVR for short). By adopting the greedy stagewise and iterative strategies, it is capable of online estimating parameters of complicated systems. In order to verify the effectiveness of the FOAHSVR, an FOAHSVR-based analytical redundancy for aeroengines is developed. Experiments on the sensor failure and drift evidence the viability and feasibility of the analytical redundancy for aeroengines together with its base-FOAHSVR. In addition, the FOAHSVR is anticipated to find applications in other scientific-technical fields.     

梯形齿车轮月面牵引性能的离散元分析

采用离散元法分析梯形齿车轮在月面软土地形的通过性,提出不规则形状颗粒群系统的离散元建模技术,建立车轮牵引性能参数的细观表达式.基于模拟月壤的直剪实验数据,通过反复调试获得最佳土单元模型参数.轮-土作用的离散元分析结果表明:车轮在月壤地形的牵引性能与滑转率和轮齿结构有关,增加滑转率可获得更高的挂钩牵引力,但同时车轮所需的驱动转矩提高;增加轮齿高度可获得更大的土壤推力,但行驶阻力也相应增大;轮齿数量对车轮牵引性能影响较小,但影响车轮在行驶中的平顺性.