rom 15 sel

with primary goat embryonic fibroblast showed no difference from traditional feederlayer-based culture method used in mouse and human. The putative primary EG colonies were multilayer clumps ofcompact cel     

利用热源温度场迭加法诊断持续点热源的强度及位置

可重复使用运载器的防热瓦故障会使航天器的局部结构产牛热源，并在结构中形成温度场。应用热源温度场迭加法的解函数，解得结构温度历程，然后据此温度的变化率趋势判断出热源位置，在此基础上依据多点测最值构造出辨识参数用于热强度识别，通过对一薄壁结构模型算例的计算仿真，证明了本文所提方法的有效性。论文工作为进一步开展热源诊断技术研究，提供了可资工程实践应用的数值算法体系以及有益的数值计算结论。     

基于产品结构对设计文件进行有效管理

介绍了中国西南电子设备研究所设计文件管理平台——图档管理系统的特点、组成和功能,阐述了图档管理系统对文件管理的作用和意义,说明基于产品结构对设计文件进行管理的必要性和可行性。     

用于卫星推力室的新型催化剂

卫星上安装有用于轨道和姿态控制的小推力推力室。推力由三氧化二铝基的铱催化剂分解无水肼而产生。铱催化剂的主要缺点是成本高和生产技术复杂。目前的工作是把钼(M)、钨(W)的碳化物与氮化物的合成过程与成型联系起来,形成有大、中孔隙的新型催化剂,来代替昂贵的传统催化剂30%铱——三氧化二铝(即shell-405_(TM))。在这种新的工艺中,首先是制备胶状的钨酸和钼酸;然后把这些材料与有机聚合物混合,使之生成胶体溶液;再挤压成型。其次把生成的这些中间过渡产品送去加热处理,焚烧掉有机聚合物得到所期望的有大、中孔隙的氧化物。最后一步是按照Boudart和Volpi方法利用挤出物制备氮化物和碳化物。本文给出了用2N推力室试验新催化剂的主要试验结果,同时与Shell 405~(TM)的试验结果进行了比较。试验表明新催化剂有如下特点:比表面积大;能承受高达1100K的烧结温度;热试时室压和推力高度稳定,催化剂机械强度高。新催化剂的主要优点是生产工艺更简单而且成本更低。     

计算机帧时间对半实物仿真的影响

半实物仿真试验中,要求计算机帧时间与计算积分步长相一致,但在实际试验中不容易精确地做到。本文分析了这种不一致给半实物仿真试验带来的影响,给出了解决的办法,文章中还给出了一实例来说明。     

Field formation around negatively biased solar arrays in the LEO-plasma

Heavy emission caused by impacting plasma ions results in a fast discharging effect of the initially large surface potentials on the dielectric solar cells. This eventually counteracts the energization process of the plasma ions to the cover glasses and leaves no significant electric fields. Thus, with an existing thermal plasma, electrons are again able to reach dielectric surfaces. Strong localized electric fields of the order of several 10 kV/cm form near the interconnector-cover glass interface.     

胶州湾环境污染—卫星遥感信息分析

陆地卫星主题绘图仪(TM)图象和我国国土普查卫星全景相机照片解译分析与现场调查表明,胶州湾东岸工业废水污染相当严重,主要污染源集中在海泊河、李村河、娄山河以及沧口区沿海一线,污染水带宽达4～7km,在落潮流携带下扩散至湾口外海。由青岛碱厂排污形成的“白滩”污染区现有面积为0.53km~2。青岛市大气污染严重,源自市区的烟羽宽达14km,顺风飘逸远达30km,势必造成酸雨等灾害。     

EUV emission from normal galaxies

Using data from the Wide Field Camera EUV all-sky survey, we have established upper limits to the EUV flux from a sample of 30 bright, nearby, non-active spiral galaxies. These galaxies were chosen to be those most likely to be detected in the EUV on the basis of (i) low interstellar absorption within our own galaxy, (ii) brightness in other wavebands, (iii) high star formation activity, and (iv) proximity. The derived EUV upper limits are restrictive, and establish for the first time that the EUV flux escaping from galaxies does not constitute a major component of their bolometric luminosity, and in particular that it cannot be the sink for the energy injected into the interstellar medium by supernova explosions, as had been suggested following the failure to detect this power in the X-ray band.     

A bistatic SAR mission for earth observation based on a small satellite

The authors present a new scientific space mission consisting of a satellite carrying a receiving- only SAR which receives the signal transmitted by the ENVISAT-1 SAR. The integration of ENVISAT-1 SAR and bistatic radar data offers an improved potentiality of surface classification, three-dimensional observation, and the opportunity of advanced scientific experiments in the field of bistatic scattering. The small satellite nominal orbit and the attitude manoeuvres are designed in order to maintain an adequate overlap between the two radar swaths along the whole orbit, taking into account the ENVISAT-1 attitude and pointing. A preliminary satellite design (2-year lifetime) is then performed to evaluate the orbit decay and to determine the appropriate orbit manoeuvres (every 4 days) to control the satellites relative phase. The numerical simulation shows that a spacecraft of about 584kg is able to meet the mission requirements.     

复合材料层板中就位横向拉伸强度的研究

本文利用弹性力学和断裂力学方法对纤维增强复合材料的横向拉伸强度进行了分析，其中考虑了９０度开裂层厚度和开裂邻层的约束效应的影响，推导出正交各向异性对称铺层中昨合就位横向拉伸强度的数学表达式，得出开裂层的厚度和约束邻层铺设角对就位横向拉伸强度都有影响的结论，理论计算与Ｆｌａｇｇｓ实验结果吻合较好。