A bistatic SAR mission for earth observation based on a small satellite

The authors present a new scientific space mission consisting of a satellite carrying a receiving- only SAR which receives the signal transmitted by the ENVISAT-1 SAR. The integration of ENVISAT-1 SAR and bistatic radar data offers an improved potentiality of surface classification, three-dimensional observation, and the opportunity of advanced scientific experiments in the field of bistatic scattering. The small satellite nominal orbit and the attitude manoeuvres are designed in order to maintain an adequate overlap between the two radar swaths along the whole orbit, taking into account the ENVISAT-1 attitude and pointing. A preliminary satellite design (2-year lifetime) is then performed to evaluate the orbit decay and to determine the appropriate orbit manoeuvres (every 4 days) to control the satellites relative phase. The numerical simulation shows that a spacecraft of about 584kg is able to meet the mission requirements.     

GPS based onboard and onground orbit operations for small satellites

In extension to common applications such as groundtrack displays and antenna steering, the SGP4 orbit model is proposed for operational orbit determination in small satellite missions. SGP4 is an analytical orbit model for Low-Earth orbiting satellites that is widely used for the propagation of NORAD twoline elements. Twoline elements may hence be generated completely independent of NORAD. Their use as exclusive source of orbital information simplifies the operations concept and reduces mission costs through the extensive use of existing low-cost mission support software. Due to small computer resource requirements of 8–10kByte, the SGP4 model may also be applied for onboard orbit computations making use of e.g. a 80186 processor, thus ensuring full compatibility of ground-based and onboard operations. The proposed approach is particularly suited in combination with a space-borne GPS receiver, were the C/A-code navigation solutions are treated as measurements that are adjusted in a least-squares sense using the SGP4 model. As consequence, inherent drawbacks of the pure navigation solutions such as data gaps and scatter as well as limited velocity accuracy are avoided, while the operational navigation activities are kept at a minimum. The feasibility of the concept is illustrated based on real GPS navigation data from the TOPEX/Poseidon and the MIR space station with an inherent data quality of 50–100 m. It is shown that 3 hours of data within a 4 day period are sufficient to keep the position error within 4 km, that is considered sufficient for most applications.     

弹道导弹自由段飞行中的守恒量及其应用

从精确弹道计算所用的数学模型出发，指出了弹性在自由段飞行中的两个具有明确物理意义的运动守恒量，并给出了用发射坐标系下的运动参数求这些守恒量的简洁计算公式。这两个守恒量可作为一种简单、实用的辅助评估手段用于计算结果可信性分析以及导弹发射诸元的校验。     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

X射线探伤机空气比释动能率测量不确定度评定

基于X射线探伤机空气比释动能率测量的数学模型，对其测量不确定度进行了评定。     

域外刑事评议程序之比较研究

刑事评议程序是介于庭审程序和宣告程序之间的一个重要程序,它既是庭审的自然延续,又是裁判结论形成的前提和基础。然而,欲保证刑事评议程序的正常运行,刑事评议主体之独立必须得到保证;刑事评议之客体还应被全面考虑,并对其进行细化,以确保刑事评议的针对性和有效性,防止出现"估堆"现象。本文以域外刑事评议程序为对象,从评议的主体、客体等角度进行梳理,得出规律性的认识,以期对我国关于刑事评议的立法有所裨益。     

8mm衰减标准装置

对8mm衰减标准装置的工作原理、系统设计、主要技术特点、误差分析等进行了详细介绍,并附有测试和分析数据。该装置达到了80dB的量程、全频段和±0.003dB/10dB的准确度。     

基于蒙特卡罗法辐射传递系数的统计分析

文章基于蒙特卡罗方法定义了表面热辐射换热辐射传递系数的表达式,确定其概率分布和置信度水平并进行统计分析。推导封闭腔内辐射传递系数的相对和绝对误差公式,为求解辐射传递系数所需追踪射线数量提供参考依据。     

锌渣的固化处理及浸出毒性试验研究

采用药剂稳定化、水泥固化以及二者结合等方法对锌渣进行了处理研究。结果表明重金属螯合剂的药剂稳定化和水泥固化相结合的方法处理锌渣,其重金属含量可以低于固体废物毒性浸出标准的限值,能有效控制对周围环境的污染。所以,采用药剂稳定化和水泥固化结合的方法处理锌渣是完全可行的。     

共析钢的相变超塑性扩散连接

根据高温扩散和空洞蠕变闭合理论，在恒温超塑性扩散连接基础上建立相变超塑性扩散连接数学模型，可确定各工艺参数，诸如循环上限温度、压力、循环次数以及升、降温速率等对连接的影响，作为选择合适工艺参数的依据。经过对T8共析钢相变超塑性扩散连接试验研究，证明该理论模型与试验结果吻合较好。