LuxSpace’s 4M Mission

<正>Chang’e 5-T1,the Earth re-entry demonstrator in phase III of the Chinese Lunar Exploration Program was sent on an Earth-Moon free return trajectory onboard a LM-3C launch vehicle at 2:00 am Beijing Time on October 24,2014.Chang’e 5-T1 also carried a private mission to the moon as a piggyback payload called the 4M mission(Manfred     

运动油滴/固体壁面斜碰撞的状态辨识及特征分析

 航空发动机轴承腔油气两相流动与换热研究是轴承腔润滑与换热设计的重要基础工作,而运动油滴与轴承腔壁面的碰撞状态辨识及特征分析是轴承腔油气两相流动与换热研究的组成部分。基于VOF方法建立了运动油滴与固体壁面斜碰撞数值仿真模型,实现了运动油滴与固体壁面斜碰撞状态的数值模拟,分析了碰撞油滴直径、入射角和碰撞速度对沉积油膜铺展长度、油膜堆积厚度和溅射油滴数目等碰撞状态特征参数的影响规律,提出了运动油滴与固体壁面斜碰撞条件下的状态判断准则,并得到了文献的物理试验工作的支持。研究结果表明:随着油滴入射角减小,沉积油膜铺展长度和油膜堆积厚度增大,溅射油滴数目减少;随着碰撞速度和油滴直径的增大,沉积油膜铺展长度和溅射油滴数目均增大,但油膜堆积厚度对应前者呈减小趋势、对应后者仍呈增大趋势。     

Autonomous navigation using the TDRSS Onboard Navigation System (TONS)

The National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC) is currently developing a Tracking and Data Relay Satellite (TDRS) System (TDRSS) Onboard Navigation System (TONS) to provide onboard knowledge of highly accurate navigation products autonomously to users of TDRSS. The TONS I operational system processes Doppler data derived from scheduled forward-link S-band services to provide onboard orbit and frequency determination and time maintenance. TONS I is implemented using a stable onboard frequency reference, a Doppler measurement capability in the user transponder, and onboard navigation/signal acquisition software. The success of the TONS experiment (1992/1993), which was implemented on the Explorer Platform/Extreme Ultraviolet Explorer (EP/EUVE) spacecraft, demonstrated the flight readiness of TONS I. TONS II-A provides the user with additional Doppler data derived from an S-band beacon signal, available approximately 80 percent of the time. This paper describes the TONS operational capabilities, configurations, and expected performance.     

The X-ray properties of normal galaxies

An extensive program to study nearby normal galaxies was carried out by various observers using the imaging instruments on the $\text{Einstein}$ Observatory; more than 50 such galaxies were detected with 0.5 – 3.0 keV luminosities ranging from 2 × 10³⁸ ergs s^?1 to 3 × 10⁴¹ergs s^?1. The X-ray luminosity of normal galaxies is ~2 × 10^?4 of the optical luminosity and shows no strong correlation with morphological type. For the nearest galaxies, (the Large and Small Magellanic Clouds, M31 and M33,) studies, performed with the Observatory, were comparable to the $\text{Uhuru}$ survey of the Galaxy. Approximately 30 new SNR were recognized in the Magellanic Clouds as a result. Over 90 sources were detected in M31 of which at least 20 are identified with globular cluster. The numbers of luminous (>10³⁷ ergs s^?1) sources detected in the nearest galaxies per unit mass are similar to that found in our own galaxy. Individual X-ray sources in the arms of nearby spirals can be very luminous; seven with luminosities in excess of 10³⁹ergs s^?1 have been discovered. The nuclei of some, but not all, normal galaxies are luminous X-ray sources; X-ray activity is not presently predictable from the radio or optical properties of the nucleus.     

月球立方星姿态控制系统的初步设计与测试

立方星是一种模块化的微小卫星,在科学探测与专业人才培养等方面具有重要意义。针对目前立方星任务逐渐从近地轨道向深空扩展的发展趋势,以立方星月球深空任务为背景,利用商业器件设计并实现了初步的立方星姿态控制系统,以及姿态控制系统所必需的结构、电源、计算机等立方星子系统,同时给出了姿态测试平台的设计方案及其硬件实现。在所搭建硬件平台上,通过测量飞轮控制器的阻尼系数,对控制模型进行参数辨识与标定,获得了与数值仿真一致的实物测试结果。针对姿态控制系统设计了PD控制律,并在控制实验中实现了至任意姿态角的机动控制。     

地外人工光合成装置研制与试验

原位资源利用技术是地外生命保障体系构建、实现人类地外生存的有效途径，是载人深空探索的核心技术。基于微通道技术的人工光合成反应器，采用流动反应器设计，用于低微重力等特殊环境条件下模拟人工光合作用，实现CO２向O２和含碳燃料的转化。微通道芯片通过气液剪切作用力使气体反应产物快速脱离电极表面并随反应介质排出反应器，理论上可以克服微重力条件对反应过程的影响，尚需进行微重力试验进行验证。同时，微通道结构可以通过精确控制反应气液的压力、流速、流量比等反应条件，获得优化的反应条件。通过地面试验，验证了该反应器将CO２还原为O２和含碳化合物的功能可行性。以Au和Ir/C作为阴极和阳极材料，3V电压条件下，O２产率可达11.74mL/h。此外，基于人工光合成反应器搭建了集反应模块、控制模块、流路驱动模块以及检测模块等于一体的地外人工光合成装置，形成原位反应、介质供给、精确控制、在线收集和检测等功能一体化的系统，并实现CO２有效转换和O２供给。为后续技术成熟度更高的反应装置研制、高产物选择性的含碳化合物转化以及人工光合成反应装置在轨试验奠定了理论和实践基础。     

机载综合无线电平台的中频数据传输总线优选分析

在综合无线电平台中，根据硬件平台通用化要求，需要选择一种总线同时满足CNI 不同波形的中频 数据传输对延时、带宽和误码率的要求。本文针对不加协议的GTX 和加上高速串行通信协议的Aurora、SRIO 进行测试，得到这三种高速串行总线在延时、带宽和误码率的对比分析，从而选择一种总线作为多波形综合的 中频数据传输总线。     

Analytical Calculation Model for Mach Wave Parameters

When a wave shaper is embedded in a liner,Mach wave will emerge above the liner,which affects the head shape of an explosively formed projectile.Mach wave parameters,including radius and pressure need to be determined to effectively match Mach wave with the liner,so that a good head shape can be obtained.An analytical calculation model for Mach wave parameter is presented based on three-shock theory,and the theoretical values agree well with the experimental ones.The analysis shows that when the radius of the wave shaper is constant,the radius of the Mach wave increases,whereas the pressure decreases while increasing the distance between the liner and the wave shaper.When the distance between the liner and the wave shaper is constant,the radius of the Mach wave increases,whereas the pressure decreases when decreasing the radius of the wave shaper.