Crystal orientation and morphology of a lamellae in wrought titanium alloys: On the role of microstructure evolution in b processing

To obtain high-quality aviation forgings of titanium alloys, b forging is an essential processing step which must be considered throughout a production process. In this work, the effect of b forging on the crystal orientation and morphology of lamellar a was experimentally investigated in a two-phase titanium alloy. Strong dynamic recovery during b working resulted in the formation of low-angle grain boundary(LAGBb) inside b grains. The lamellar a can penetrate through the LAGBb, leading to similar intra a LAGBs on subgrain boundaries. Deformation banding occurs at high strain rates, and both diffusive and sharp boundaries of deformation bands can be observed.A continuous change of the b orientation in diffusive boundaries results in the formation of fine and disordered a lamellae without intra-lamellar boundary to hold the Burgers orientation relationship(OR). On sharp boundaries, it is prone to producing continuous grain boundary a(aGB) with a highly similar orientation along the boundaries. Meanwhile, there may exist several lower-angle boundaries within the grain boundary a for a smoother orientation change on the b grain boundary.     

A comprehensive study of the 2016 Mw 6.0 Italy earthquake based on high-rate (10 Hz) GPS data

The 2016 M_w 6.0 Italy earthquake is successfully recorded by the near-field 10?Hz GPS and 200?Hz Strong Motion (SM) stations, providing valuable data for this study. A comprehensive study of this earthquake is carried out based on GPS data, which contains coseismic deformations analysis, noise analysis, seismic wave picking, and magnitude determination. The noise of most GPS-derived displacement waveforms can be described as a combination of white noise, flicker noise, and random walk noise after the earthquake occurrence, and the spectral indices vary significantly for most stations, implying that the seismic signals have affected the noise characteristic of GPS-derived displacement waveforms. S-transform is employed to assess the GPS capability to detect the seismic arrival time. The SM station AMT and the GPS station AMAT are in good agreement in seismic wave picking, and the difference is only 1.2?s in the north component, suggesting that the outcome of seismic wave picking using GPS data is reliable. Then, a classic empirical formula is employed to determine the moment magnitude. A robust moment magnitude (Mw 5.90) can be estimated by the nine GPS stations with about 23.9?s. If four GPS stations near the epicenter is chosen to determine the magnitude, it only take 13.0?s to retrieve a reliable preliminary (Mw 5.82) magnitude, which is 5.4?s ahead of nine stations. In addition, Cross Wavelet Transform (XWT) is adopted to measuring the correlation and phase relationship between GPS and SM records. The result of XWT analysis indicates 10?Hz GPS is capable of capturing reliable and accurate coseismic dynamic deformations, as evidenced by the XWT-based semblance being close to 1 between GPS and SM records. The above results confirm the capability of 10?Hz GPS to capture coseismic dynamic deformations, detect seismic arrival time, and determine earthquake magnitude. Moreover, rapid magnitude determination based on 10?Hz GPS data can be regarded as an important supplement to Earthquake Early Warning (EEW).     

液氢贮箱停放过程中的力热分析

为了寻找到运载火箭长时间停放过程中液氢贮箱的最经济液位，用于制定合理的发射流程以及紧急处置方法，采用计算流体力学(CFD)技术，对某型运载火箭停放期间液氢贮箱的力、热情况进行了仿真计算和分析。计算选用了VOF(Volume-of-fluid)两相流模型以及Lee相变模型，为了提高Lee模型在不同压力情况下对相变过程的模拟精度，采用安托因方程修正了该模型。修正后的模型首先由试验数据校验了其精确性，随后开展的液氢贮箱停放过程仿真结果表明：贮箱的竖直方向与径向均存在温度分层的现象，液相内会形成大的漩涡，该漩涡会使得冷热流体不断进行热交换，并导致贮箱内部的液氢出现气化。贮箱停放期间蒸发率最大值超过2 m 3/h，发生在停放4 h左右；而贮箱液位充填至37 m 3以上或17 m 3以下时蒸发率较低，最小值接近1 m 3/h。     

影子工资理论的发展与应用

影子工资是为实现一定的经济发展目标而人为确定的,比名义工资或实际工资更能准确地反映劳动力资源的真实价值,并能促进其合理流动与利用的经济价格。它不仅能合理地反映劳动力价值,而且还能反映社会消耗、劳动力市场的供求关系和劳动力资源的稀缺或过剩程度,有利于资源的优化配置。影子工资理论的发展经历了线性规划对偶法、市场均衡价格理论及其拓展、按贸易货物口岸价调节的国际市场价格理论等阶段。国际通用的影子工资测算方法有UNIDO法、L-M法、S-V-T法和阿拉伯法,等等。     

空间激光通信系统中的信道纠错编码技术

由于空间激光通信系统的信道状态和链路捕获跟踪的不确定性,多种形式的信道纠错编码技术正被广泛发展研究。结合空间激光通信链路中误码性能的主要影响因素,分别选择合适的编码方案进行分析。通过仿真实验可知,对于在大气结构参数为1.5×10~(-14) m~(-2/3)、风速为20 m/s的空地激光链路的环境下,在系统数据速率为2 Gbit/s、要求误码率为10~(-6)时,LDPC码结合交织码相对未编码系统有3 dB的等效编码增益,LT码相对未编码系统有3.8 dB的等效编码增益。提供了一种能快速生成、扩展和校验的编码和交织实现方法,以抵抗大气湍流的快速变化对系统性能产生的影响。     

含间隙运动控制系统中的定位抖动和 速率波动原因分析及解决措施

针对一类含间隙大惯量非直驱转动系统中出现的速率波动现象,利用描述函数法和计算仿真的方法进行了原因分析.在通常的解决措施如双电机消隙、机械消隙方法之外,针对一类间隙可测量的运动控制系统,提出了解决该类问题的新思路,即通过间隙的间接测量,利用反馈机制进行间隙补偿,并用小增益定理证明了其稳定性.实现了部分电气消隙的作用,在适当降低跟踪精度的情况下,消除了定位抖动,提高了速率平稳性.     

宇航用双极器件和光电耦合器位移损伤试验研究

文章针对器件的位移损伤效应,利用质子加速器产生的质子及反应堆中子对化合物器件和硅器件位移损伤进行试验研究,得到了GaAs光电耦合器的电流传输比(CTR)和硅晶体管电流增益hFE的退化率随等效剂量的变化规律。研究结果表明,在质子70 MeV以上高能量范围,对于硅器件适用的位移损伤等效原理对于GaAs化合物器件则不再适用,需要修正。根据试验数据,给出了经验的修正系数。     

弹用“X”,型倒置二元进气道方案与常规正置方案的气动性能对比

为提高来流马赫数范围为2~4的“X”型进气系统大攻角下的稳定裕度,设计并研究了一种倒置二元进气道设计方案,并将其与正置方案进行了比较。结果表明:来流马赫数为2.3~3.5，攻角范围为0°~6°时，倒置布局设计方案总体性能较优,未出现明显激波/附面层干扰问题,能够满足设计要求。在采用相同的进气道设计方案时,倒置布局其迎风与背风进气道结尾激波位置及总体性能参数差异更小；0°攻角时倒置布局临界总压恢复系数与正置布局相当,4°攻角时倒置布局比正置布局高2%~3%,8°攻角时普遍高19%以上,且来流马赫数越高提升幅度越明显,8°攻角下倒置布局总流量系数较正置布局高6%左右。研究还发现,当来流马赫数较低时倒置布局总阻力低于正置布局, 4°攻角时低1.7%；而来流马赫数较高时倒置布局总阻力高于正置布局,4°攻角时高2.0%。      

新一代战斗机非定常流动数值研究综述

新一代战斗机强调超机动能力和强隐身性，其中大攻角下的静态失速、动态失速及内埋弹仓绕流是与高机动和强隐身密切相关的、极具挑战的几类典型的非定常流动，它们对数值方法提出了极高的要求。为了高精度地仿真流场、清楚地揭示流动机理，有效地控制非定常流动，非常有必要发展高精度且高效率的RANS-LES混合方法体系，包含RANS-LES混合方法本身、与RANS-LES混合方法匹配的高精度自适应耗散格式、基准湍流模式、高质量计算网格、高精度时间推进方法、非定常量的统计方法等，具有极强的紧迫性。提出、发展、验证并应用该类方法数值仿真新一代战斗机（包括单独部件、组合体、甚至全机）的非定常流动，数值预测结果与风洞实验数据吻合良好；此类方法可为新型战斗机设计提供理论依据和分析手段。     

A new dynamic pushback control method for reducing fuel-burn costs: Using predicted taxi-out time

Long departure-taxi-out time leads to significant airport surface congestion, fuel-burn costs, and excessive emissions of greenhouse gases. To reduce these undesirable effects, a Predicted taxi-out time-based Dynamic Pushback Control(PDPC) method is proposed. The implementation of this method requires two steps: first, the taxi-out times for aircraft are predicted by the leastsquares support-vector regression approach of which the parameters are optimized by an introduced improved Firefly algorithm. Then, a dynamic pushback control model equipped with a linear gate-hold penalty function is built, along with a proposed iterative taxiway queue-threshold optimization algorithm for solving the model. A case study with data obtained from Beijing International airport(PEK) is presented. The taxi-out time prediction model achieves predictive accuracy within 3 min and 5 min by 84.71% and 95.66%, respectively. The results of the proposed pushback method show that total operation cost and fuel-burn cost achieve a 14.0% and 21.1%reduction, respectively, as compared to the traditional K-control policy.(3) From the perspective of implementation, using PDPC policy can significantly reduce the queue length in taxiway and taxi-out time. The total operation cost and fuel-burn cost can be curtailed by 37.2% and 52.1%,respectively, as compared to the non-enforcement of any pushback control mechanism. These results show that the proposed pushback control model can reduce fuel-burn costs and airport surface congestion effectively.