Problems in the analysis of gamma-ray burst spectra

Spectral measurements by the Solar Maximum Mission have been used to confirm the cyclotron lines in gamma-ray bursts reported from the Konus experiment. We present ISEE-3 data for the same burst (GB800419) during the same period of time which show no line. We discuss various problems in the analysis of scintillator spectra and point out that unfolded spectra are not necessarily unique and that the position of a data point in a deconvolved spectrum may vary depending on the assumed overall shape of the spectrum. As a result, if the analysis assumes a soft spectrum (such as optically thin thermal bremsstrahlung) an absorption feature might appear, whereas a harder spectrum (such as a Comptonized blackbody) would not require the feature. Since the continuum shape probably changes during the duration of a typical burst, the nonuniqueness of the spectral unfolding, combined with the assumption that the continuum is optically thin thermal bremsstrahlung, could give rise to spurious “absorption” features which vary on a time scale of seconds. Despite these problems, there is still some evidence for $\text{narrow}$ spectral lines in the range 45 to 65 keV but not for the broad lines reported from the Konus experiment. Unfortunately, the range 45 to 65 keV is the most difficult spectral region to unfold.     

Real-time stereoscopic applications using the goes operational satellites

We have investigated the use of real and synthetic stereo satellite images and stereo graphics in applications such as cloud-tracked winds, severe storm cloud analysis, and general meteorological interpretation. We have concluded that a stereo meteorological presentation is possible and desirable in an operational environment. Synthetic stereo could be used immediately in cloud-tracked wind operations. The presentation allows one to appreciate the interrelations between cloud motions and cloud structures, especially in multi-layered situations. Reprocessing of FGGE tropical wind sets with a synthetic stereo presentation showed some improved yields of low-level vectors, a significant increase in mid-level vectors, and very little change in the high-level vectors. Severe local storm real-stereo presentations are possible operationally because the 15 minute RISOP operations of GOES-East allow simultaneous scanning of both geosynchronous satellites twice per hour. The real-stereo height measurements of overshooting turrets are an improvement over infrared heights and can be used to monitor the strength of the thunderstorm updraft. Synthetic stereo presentations of thunderstorm tops can be presented in a non-linear fashion which stretches out the cloud top features. The synthetic stereo presentation is easier for most people to see. We recommend the use of a hybrid system where the viewing is done on the synthetic stereo image and the quantitative measurements are done on the real-stereo pairs.     

The sensitivity of the earth's radiation budget to changes in cloudiness

Cloudiness modulates the radiation budget at the top of the Earth-atmosphere system. For radiation balance studies, for climate diagnostic studies, and for climate modeling studies, it is important to know the sensitivity of both the outgoing longwave radiation and the net (absorbed solar minus outgoing longwave) radiation of the system to changes in cloudiness on a global basis. Based on a 45 month series of NOAA satellite scanning radiometer observations, estimates of the global distribution of these sensitivity parameters are obtained.     

Multiple Beam Satellite System Optimization

An analytical method is developed for determining the basic RF link parameters that are required in a satellite system design. Certain simplifying assumptions are required and specific system elements are selected. Two different design criteria are considered; optimizing the per-beam signal energy to noise spectral density ratio (Eb/N0), and minimizing the per-user costs. These two criteria are complements of each other subject to coverage and performance constraints. The model can be used to rapidly assess tradeoffs in various system elements. A specific example of a domestic satellite system is considered. The economic analyses are also considered and the economy of scale effect is demonstrated for the design example and considered.     

Lightweight (AlGaAs)GaAs/CuInSe2 tandem junction solarcells for space applications

Mechanically stacked tandem cells consisting of GaAs thin-film upper cells and CuInSe₂ thin-film lower cells have been developed to meet the increasing power needs projected for future spacecraft. The authors report the fabrication of the first highly efficient lightweight GaAs/CuInSe₂ tandem cell on a 2-mil thick substrate, update recent performance improvements in thin-film GaAs/CuInSe₂ tandem cells, and discuss their application to space power systems. The efficiency of 4-cm² cells has improved to 21.6% AM0, the highest ever reported for a thin-film photovoltaic cell. Lightweight 4-cm² tandem cells have been successfully fabricated with efficiencies as high as 20.8%. These cells weighed about 180 mg without optimized substrate trimming. Radiation and operating temperature effects on GaAs/CuInSe₂ tandem cells are also discussed, and an interconnect scheme to form a voltage-matched string is described     

MARC-a system for simulation and visualization of space missionscenarios

MARC (modeling, animation, rendering, and compositing), a system using advanced computer graphics and animation techniques for spacecraft mission simulation, is described. The MARC system provides capabilities for generating complex models of both man-made and natural phenomena. The system models orbital dynamics of terrestrial satellites, supports solid models for the Earth, Sun, and Moon, and simulates the dynamics of terrestrial satellites for arbitrary elliptical orbits. A stellar background including magnitudes and spectral types is generated. The elements of the MARC system, including object modeling tools, orbital animation techniques, the rendering system used to compute individual frames, and the compositing techniques used, are discussed. The software architecture of the MARC system and the hardware used to support the system are described     

LIPS III-a solar cell test bed in space

The LIPS III satellite, which was launched into a 1100-km circular orbit of 60° inclination in the spring of 1987, is discussed. LIPS III is a member of the living-plume-shield class of spacecraft, all of which were built around a simple sheet metal plume deflector. The purpose of LIPS III was to provide a testbed for space power sources. An overview of the LIPS III system is given, and the experiments submitted for it, all but one of which were photovoltaic in nature, are described     

A design procedure for the phase-controlled parallel-loadedresonant inverter

High-frequency-link power conversion and distribution based on a resonant inverter has been recently proposed. The design of several topologies is reviewed and a simple approximate design procedure is developed for the phase-controlled parallel-loaded resonant inverter. This design procedure seeks to ensure the expected benefits of resonant conversion and is verified by data from a laboratory 2.5 kVA, 20-kHz converter. A simple phasor analysis is introduced as a useful approximation for design purposes. Experimental results show that under transient conditions such as load short-circuit, a reversal of the expected commutation sequence is possible. This should be accounted for in the design of the power circuit, or prevented by the design of the controller     

US government policies and hypersonic flight in the 21st century

The author examines the potentially negative impact of the US regulations on the development of advanced materials, components, and systems. He gives high priority to modification of US antitrust laws if the US is to have the best possible opportunity to compete with more aggressive economies abroad. He identifies export controls as limiting the availability of data to US firms engaged in developing commercial applications. He asserts that policies must also be enacted to better protect intellectual property rights