Coherent spatial filtering for SAR detection of stationary targets

Analysis of UHF synthetic aperture radar (SAR) images has revealed a spatially correlated phase structure over a resolved target such as a long wire or a large truck. This phase variation, approximated by a simple, range-dependent factor 4πr/λ, results in a line-shaped image spatial spectrum. Such image phase and spectral features can be exploited by coherent spatial filtering to improve target-to-clutter ratios of large targets and stationary target detectability in a strong clutter environment     

Web-Enabled Remote Machine Monitoring and Prognostics

1 INTRODUCTION Today's machine tool industries are facing unprecedented challenges brought about by development of outsourcing and low cost manufac-turing in Asia. Manufacturing outsourcing provided many opportu-nities but also added challenges to produce and deliver products with improved productivity, quality, service and costs. Lead times must be cut short to their extreme extend to meet need the changing demands of customers in different regions of the world. Products are required to be make-to-order, which requires a tight control and near-zero downtime of the plant floor, equipment and devices.     

楔形夹缝内部液体核态沸腾特性

针对楔形夹缝内部液体核态沸腾状况进行可视化实验研究。实验利用表面平整均匀的铜板作为加热平板,用玻璃作为盖板形成楔形夹缝。实验现象表明沸腾核化现象比较容易在狭缝中相对较大的空间中形成,而在狭缝中相对较小的空间里形成沸腾需要更高的热流密度。实验现象还表明,在同一空间尺度条件处的核化和气泡演化情况基本相同,气泡的生长速率在无量纲参数D≥0.1时受到空间尺度的明显影响。      

不同矢量偏角下二元喷管内流特性的数值研究

应用多重网格MacCormack显式格式对不同矢量角下二元喷管的内部流动进行了模拟分析。计算时, 在细网格上采用了雷诺平均N-S方程与k-ε湍流模型方程;在粗网格上则采用Euler方程。数值计算给出了较清晰的流谱, 壁面压力分布的计算也与实验结果相吻合。通过计算结果分析了矢量喷管几何参数对流场的影响, 并对矢量喷管的推力特性进行了数值研究。      

Cr12MoV钢电火花辅助铣削实验研究

以典型难切削金属材料Cr12MoV模具钢为研究对象，使用ABAQUS对其在电火花放电条件下温度场进行数值模拟，在不同进给率下对其进行传统铣削和电火花辅助铣削对比试验。借助高速摄像机、扫描电镜和测力计等设备，对其切削力特征、表面形貌和刀具磨损进行了对比分析研究。结果表明，电火花辅助铣削的切削力比传统铣削降低28.57%~51.47%，表面粗糙度降低2/3。与传统铣削相比，电火花辅助铣削在降低切削力、提高表面质量和减少刀具磨损方面具有显著优势。