惯性/图像组合导航中的双模态双滤波器研究

在简要介绍了飞行器视觉图像定位导航原理及模型的基础上，针对其非线性模型的推广Kalman滤波的收敛与初始条件有关的问题，将其定位导航的两种模型（线性与非线性模型）组合，提出了双模态双滤波器滤波方法。这种滤波能很好地解决非线性推广Kalman滤波的收敛问题。通过第一个线性滤波器的滤波估计给第二个非线性滤波器提供滤波初值，使这一非线性滤波收敛，并能取得较高的滤波精度。     

动压马达半球零件表面微观工艺特征对 产品设计原理的影响研究

零件加工过程的工艺因素都会给零件表面及表层带来(留下)特有的微观特征,这种微观特征与产品设计原理和零件性能特性要求的匹配性对高精度惯性产品的固有性能会产生至关重要的作用.首次在惯性仪表制造体系中引入了零件表面微观工艺特征性概念,以解决仪表精度提高和合格率问题.采用微观工艺特征分析方法思路,从产品设计技术特征(原理特征和性能特征)角度,从更微观、更微小的细节去识别、分析加工合格的零件存在的某些特征状态.初步分析了动压马达半球零件加工表面存在的两类微观特征可能导致惯性仪表生产合格率低、参数稳定性差的影响机理和特征形成的制造因素,提出了改变和完善产品制造工艺设计的思路.     

一种钢筋弯曲设备的伺服电机控制设计

为提高钢筋生产过程中的安全性和可靠性,提供了一种钢筋弯曲设备的伺服电机控制设计,包括PLC控制单元、行走伺服电机、弯曲伺服电机、电磁阀、气缸、信号采集单元及触摸屏。信号采集单元包括光电开关、磁性开关及钢筋弯曲设备的开关按钮。该伺服电机控制设计通过PLC控制器运动控制技术及数据处理技术实现设备的全数字化控制,通过伺服控制技术实现设备的精准高效的运动及生产节能,从而实现系统操作界面更人性化、操作简单快捷、钢筋弯曲准确、生产效率高、节能,同时也大大降低了工人的劳动强度及废品率,进而降低了生产成本。     

Stability,flying qualities and longitudinal parameter estimation of a twin-engine CS-23 certified light aircraft

This paper presents some results of the flight test campaign conducted on the Tecnam P2006T aircraft, on the occasion of its certification process. This twin-engine propeller airplane is certified under the normal category CS-23 and FAR 23. A prototype of this light aircraft has been tested in flight for a post-design performance optimization and for the assessment of flight qualities. These experiences have led to the application of two winglets to the original wing. The final configuration has been extensively tested for the achievement of CS-23 certification. The longitudinal and lateral-directional response modes have been assessed and quantified. At the same time the longitudinal airplane model, through a dedicated set of flight maneuvers, has been characterized by means of parameter estimation studies. The aircraft stability derivatives have been estimated from the acquired flight data using the identification technique known as Output Error Method (OEM). Some estimated stability derivatives have been also compared with the corresponding values extracted from leveled flight tests and from wind tunnel tests performed on a scaled model of the aircraft.     

空间核电源热管式辐射散热器热分析与参数优化

针对空间热管辐射散热器的特殊工况对散热器进行热分析建模，通过分析其传热原理，建立出热阻模型，并通过和实际设计进行对比，验证模型和计算方法的可行性。选取翅根温度、翅片长度和翅片厚度等参量作为约束条件，分别对热管式空间辐射散热器的翅片散热效率和系统质量特性进行优化分析，获得最优设计参数。     

基于2.5维小型化设计的UHF频段高性能超材料吸波体

提出一种基于2.5维小型化设计的高性能超材料吸波体,其吸波频带覆盖全球范围内超高频射频识别(Ultrahigh-frequency radio frequeny identification,UHF-RFID)系统工作频段。该吸波体结构借助多个金属化过孔增加回路电长度进行小型化并拓展吸波带宽,通过单独调节上下表面衰减电阻阻值缩小此过程中介质板厚度带来的极化差异。单元尺寸被缩小至13.6 mm×13.6 mm,约为中心频率波长的1/60。仿真和实验结果表明,该2.5维小型化高性能超材料吸波体在840～960 MHz的频带范围内平均吸收率超过99%,相比已公开文献,95%吸波带宽提高45%以上,可用于改善受限空间中RFID系统的可靠性。     

Review Article: MHD Wave Propagation Near Coronal Null Points of Magnetic Fields

We present a comprehensive review of MHD wave behaviour in the neighbourhood of coronal null points: locations where the magnetic field, and hence the local Alfvén speed, is zero. The behaviour of all three MHD wave modes, i.e. the Alfvén wave and the fast and slow magnetoacoustic waves, has been investigated in the neighbourhood of 2D, 2.5D and (to a certain extent) 3D magnetic null points, for a variety of assumptions, configurations and geometries. In general, it is found that the fast magnetoacoustic wave behaviour is dictated by the Alfvén-speed profile. In a ??=0 plasma, the fast wave is focused towards the null point by a refraction effect and all the wave energy, and thus current density, accumulates close to the null point. Thus, null points will be locations for preferential heating by fast waves. Independently, the Alfvén wave is found to propagate along magnetic fieldlines and is confined to the fieldlines it is generated on. As the wave approaches the null point, it spreads out due to the diverging fieldlines. Eventually, the Alfvén wave accumulates along the separatrices (in 2D) or along the spine or fan-plane (in 3D). Hence, Alfvén wave energy will be preferentially dissipated at these locations. It is clear that the magnetic field plays a fundamental role in the propagation and properties of MHD waves in the neighbourhood of coronal null points. This topic is a fundamental plasma process and results so far have also lead to critical insights into reconnection, mode-coupling, quasi-periodic pulsations and phase-mixing.     

An overview of RADOM results for earth and moon radiation environment on Chandrayaan-1 satellite

The RADiatiOn Monitor (RADOM) is a miniature dosimeter-spectrometer that flew onboard the Chandrayaan-1 lunar mission in order to monitor the local radiation environment. Primary objective of the RADOM experiment was to measure the total absorbed dose, flux of surrounding energetic particles and spectrum of the deposited energy from high energy particles both en-route and in lunar orbit. RADOM was the first experiment to be switched on after the launch of Chandrayaan-1 and was operational until the end of the mission. This paper summarizes the observations carried out by RADOM during the entire life time (22 October 2008–31 August 2009) of the Chandrayaan-1 mission and compares the measurement by RADOM with the radiation belt models such as AP-8, AE-8 and CRRESS.     

空间细胞机器人系统关键技术及其应用

针对传统空间操控装置难以适应未来大型空间设施在轨建设的问题，提出一种能够实现多层次自重构的空间细胞机器人系统，并对其概念体系以及设计理念进行了分析。介绍了空间三角桁架装配场景下的空间细胞机器人系统硬件设计。提出了空间细胞机器人系统关键技术，包括多智能体协同不确定行为规划、多层次机器人系统构型决策、多智能体协同无环境地图自主导航以及多智能体分层协同分布式控制等。最后结合空间细胞机器人系统的特点与优势，对其应用前景进行了展望。