多自由度振动环境下惯组非线性传递特性研究

惯组作为飞行器姿控系统的传感器,其局部安装结构的传递特性的测量精度直接关系到导航精度。目前,惯组普遍使用减振器进行隔振,而减振器都呈现出较强的非线性特征。为了考察惯组在不同工况下的传递特性,将惯组简化为六自由度Duffing模型,推导了基础激励下系统的运动微分方程,并用龙格-库塔法对方程进行求解,分析了自由衰减振动和强迫振动下不同工况的系统传递特性。结果表明,多自由度激励比单自由度激励工况得到的系统传递特性的频率和幅值都低。考虑到惯组真实的使用环境,应当在多自由度振动环境下进行传递特性试验。     

等离子体激励频率对压气机稳定性影响的实验与数值模拟研究

本文采用实验与数值模拟方法研究了不同等离子体激励频率对低速轴流压气机的扩稳特性。结果表明,等离子体激励能够显著减弱叶顶泄漏流非定常脉动,增加主流动量,削弱泄漏流和回流动量,抑制泄漏流向叶尖前缘移动,从而扩大压气机的稳定工作范围;非定常激励对压气机稳定性有重要影响,随着激励频率的增加,扩稳效果增强,但激励频率存在阈值,当频率高于0.5倍叶片通过频率时,随着频率的增加,扩稳效果几乎不变。     

一种地月转移轨道中途修正的制导算法

针对地月转移轨道中途修正问题，提出了一种求解修正速度增量的制导算法。该算法由初值设计和精确解求解两部分组成。首先，利用伪状态理论，通过简单迭代设计中途修正的初值，并通过Vinti预报方法修正了地球扁率的影响。然后，在求解精确解时，提出了一种基于伪状态理论的状态转移矩阵解析算法。该算法通过设计高精度的初值，降低了求解地月转移轨道中途修正问题的难度，而且避免了传统数值方法计算状态转移矩阵的复杂性。数值仿真结果表明，该算法可有效求解中途修正问题。     

The propagation features of LF radio waves at topside ionosphere and their variations possibly related to Wenchuan earthquake in 2008

The artificial low frequency (LF) signals recorded at topside ionosphere from DEMETER satellite were analyzed in this paper, and the typical diurnal and seasonal variations were illustrated around 162?kHz in electric field spectra. The larger power spectrum density (PSD) values in electric field at local nighttime and in winter season all demonstrate the correlation feature of lower plasma content to higher penetration of LF waves into ionosphere. Around Wenchuan earthquake, the comparison of signal-noise-ratio (SNR) values in electric field with each half month during January to May in 2008 and the same half month in May from 2005 to 2007 revealed their lowest values and small covering area around the preparation region of Wenchuan earthquake in 2008. Combined with other researches in VLF radio waves and geochemical observations from satellite, the interaction of ion accumulation and upward movement from gas-water release at surface might be a key factor to disturb the ionospheric plasma density, and then possibly leading to the decrease of low energy penetration of LF radio waves from the artificial transmitted source at ground.     

基于深度学习的空间站舱内服务机器人视觉跟踪

为提升舱内跟随服务机器人的任务辅助能力,解决机器人对航天员的视觉跟踪问题,提出了一种基于深度学习和概率模型的人体视觉跟踪算法。利用深度卷积神经网络实现了对穿着多样、姿态任意人体的稳定检测。结合人体检测结果,设计了运动预测概率模型,实现了对指定人员准确、连续的跟踪。算法对包含大多数航天员活动的多个数据集进行了验证。实验结果表明:提出的跟踪算法实现了对穿着多样、姿态任意人体的稳定跟踪,并有效避免了由于穿着相似、遮挡可能造成的误跟踪问题。该算法为空间站舱内跟随服务机器人对航天员的视觉跟踪提供了有效的解决方法。算法基于融合的RGB-D图像,工程上易于构建和实现,也可拓展到其他跟随服务机器人视觉跟踪任务中。     

Orbit determination of BDS-3 satellite based on regional ground tracking station and inter-satellite link observations

The BeiDou global navigation satellite system (BDS-3) has established the Ka-band inter-satellite link (ISL) to realize a two-way ranging function between satellites, which provides a new observation technology for the orbit determination of BDS-3 satellites. Therefore, this study presents a BDS satellite orbit determination model based on ground tracking station (GTS) observations and ISL ranging observations firstly to analyze the impact of the ISL ranging observations on the orbit determination of BDS-3 satellites. Subsequently, considering the data fusion processing, the variance component estimation (VCE) algorithm is applied to the parameter estimation process of the satellite orbit determination. Finally, using the measured data from China’s regional GTS observations and BDS-3 ISL ranging observations, the effects of ISL ranging observations on the orbit determination accuracy of BDS-3 satellites are analyzed. Moreover, the impact of the VCE algorithm on the fusion data processing is evaluated from the aspects of orbit determination accuracy, Ka-band hardware delay parameter stability, and ISL ranging observation residuals. The results show that for China’s regional GTSs, the addition of BDS-3 ISL ranging observations can significantly improve the orbit determination accuracy of BDS-3 satellites. The observed orbit determination accuracy of satellite radial component is improved from 48 cm to 4.1 cm. In addition, when the initial weight ratio between GTS observations and ISL ranging observations is not appropriate, the various indicators which include orbit determination accuracy, ISL hardware delay, and ISL observation residuals were observed to have improved after the adjustment of the VCE algorithm. These results validate the effectiveness of the VCE algorithm for the fusion data processing of the GTS observations and ISL ranging observations.     

高能(450 kV)X射线参考辐射场附加过滤研究

利用MCNP程序对450kV X光机建立模型，计算各参考辐射质下的原级谱、平均光子能量。对ISO 4037-1中已有范围的管电压与附加过滤片厚度关系曲线进行二次拟合，确定模拟厚度范围。利用MCNP计算各附加过滤组合下的平均光子能量值，并与外推法得出的平均光子能量值进行对比，将相对偏差最小时的附加过滤作为最终确定值。从部分能量点的模拟与测量结果的对比可看出，模拟得出的平均光子能量在2%以内与PTB及中国计量院测量结果保持一致，附加过滤最大相对偏差为18%。     

捷联式航空重力测量系统的数据处理方法比较与分析

重力数据处理对获取高精度重力异常值有着重要作用，是重力测量的核心技术。重力仪在搭载运动载体进行重力测量时，载体的高频振动对重力测量数据和GPS数据均会产生不可避免的干扰，导致提取的重力异常粗值含有大量高频噪声。围绕重力数据的处理方法这一核心技术，介绍了FIR低通滤波、零相移滤波、标准Kalman滤波、正反Kalman滤波4种滤波方法的基本原理，运用这4种方法处理了SAG捷联式重力仪的某次实际飞行测量数据，比对了基于SINS/GPS组合导航和SINS/DGPS组合导航的重力测量数据处理结果。通过对本次试验重复测线内符合精度进行比对，验证了4种方法的可行性和优劣性，同时验证了SAG重力仪的测量精度。     

导管装焊精确定位柔性辅助系统的设计与开发

针对运载火箭增压输送系统中的拼焊型管路产品，以实现管路产品焊接的柔性装配为最终目标，开展了装焊精确定位柔性辅助系统的设计与开发。根据拼焊型管路的传统制造模式，焊接装配是采用专用装焊工装保证导管的空间走向和总体尺寸，因而每项导管对应一套专用装焊工装，管路结构的调整将导致原工装的返修甚至报废，造成生产成本高且严重影响导管的研制周期，该问题在研制型号中尤为突出。随着型号越来越多，专用装焊工装数量也显著增多，给工装管理也带来了极大的挑战。本文通过装焊精确定位柔性辅助系统的设计与开发，以导管特征点的坐标为控制指令实现柔性装配系统按照装配要求进行精确走位和定位，以柔性化的装配系统实现不同规格、不同空间走向的拼焊型管路产品的焊接装配。