气体注入压力激励法测量卫星液体推进剂剩余量的热力学模型

通过对气体注入压力激励法测量卫星液体推进剂剩余量系统的详细热力学过程分析,建立了能满足实际测量需求的等温和绝热两种热力学模型,对具体测量模型的选用及相关问题进行了分析。     

飞机电源系统故障诊断方法综述及发展趋势

飞机电源系统是机上一切用电设备的电能来源,其安全性与可靠性至关重要。在环保和高效发展需求的背景下,现代航空工业正在推进以电能为核心的多电/全电飞机技术的研究和应用。电驱动装置和电力电子器件的广泛使用导致飞机电源系统结构的复杂化,对飞机的可靠性、安全性、测试性和维修性提出了更高的要求,研究飞机电源系统的故障诊断技术具有重要意义。首先介绍了飞机电源系统的组成结构和各自功能,概述了飞机电源系统的发展历程,对比了国内外典型电源系统的特征,总结了飞机电源系统中的主要故障模式、故障特点和失效原因,并提出了一种飞机电源健康管理系统的设计架构,然后综述了国内外基于模型和基于数据的故障诊断方法研究进展,从准确度、数据需求量、适用性和实现难易程度等方面评述了各类诊断方法的特点,最后指出了飞机电源系统故障诊断技术面临的挑战和发展趋势。     

航天器结构材料的应用和发展

文章首先说明航天器结构材料的定义及其性能要求，然后简要介绍航天器结构材料的主要类型及其基本性能，并且综述航天器结构材料的应用概况，最后指出航天器结构材料的发展趋势。     

磁场全张量测量计算方法与误差分析

矢量磁场和磁场全张量数据是多磁源反演的数据基础。针对矢量磁场和磁场全张量的测量问题,文章提出了矩阵式矢量磁场连续扫描方法。对利用矢量磁场计算磁场全张量所用的数据结构进行了研究,应用MATLAB软件对常用的十字形和六面体两种不同数据计算结构进行了仿真分析,结果表明,两种计算结构的误差相近且均不大于10%;并分析了基线距离对磁场全张量计算的影响,结果表明,磁场全张量计算误差随着基线距离的增加而增加。     

全位置自动焊管机TIG焊电源研制

本文介绍了一种适用于管－管、管－板对接的全位置自动TIG焊晶体管电源，该电源采用可编程控制器控制，具有直流／脉冲功能，焊接参数在4个区间内可分别预测，试验表明，该电源区间过渡时电弧稳定，抗干扰能力强，焊缝均匀、连接。     

火箭发动机基于神经网络非线性辨识的故障检测

应用神经网络方法，提出了一种液体火箭发动机故障实时检测算法。神经网络采用非线性辨识技术贴近发动机的工作过程，并输出包合发动机故障信息的辨识误差信号。若辨识误差变大超过一定阈值，检测逻辑就预报发动机故障。在发动机启动阶段离线训练神经网络，在发动机稳态过程可以采用离线或在线学习算法。实验研究表明神经网络可以成功地应用于大型泵压式液体火箭发动机的故障检测。     

成分调整对DZ125合金凝固行为的影响

研究了标准成分的DZ125合金与以此为基础提高W、Al，降低Mo、Ti合金中的初生相的凝固顺序，确定了这两种合金在固-液范围内不同温度下的固-液相比例。结果表明，高W、Al低Mo、Ti合金显著缩小了合金凝固范围（Δ），使液相线温度提高了20℃，固相温度提高了70℃，并缩小失去技晶间毛细补缩能力时的温度与固相线之间的温度范围（ΔT2），从而减少了合金热裂倾向，提高了可铸性。Ti含量影响（γ＋γ'）共晶相尺寸、数量及形态，W、Wo对（γ＋γ'）共晶的数量、尺寸及形态均无影响。     

A Detection Algorithm for Optical Targets in Clutter

There is active interest in the development of algorithms for detecting weak stationary optical and IR targets in a heavy opticalclutter background. Often only poor detectability of low signal-to-noise ratio (SNR) targets is achieved when the direct correlation method is used. In many cases, this is partly obviated by using detection with correlated reference scenes [1, 2].This paper uses the experimentally justified assumption that most optical clutter can be modeled as a whitened Gaussian randomprocess with a rapidly space-varying mean and a more slowlyvarying covariance [2]. With this assumption, a new constant falsealarm rate (CFAR) detector is developed as an application of the classical generalized maximum likelihood ratio test of Neyman and Pearson. The final CFAR test is a dimensionless ratio. This test exhibits the desirable property that its probability of a false alarm(PFA) is independent of the covariance matrix of the actual noiseencountered. When the underlying noise processes are complex intime, similar considerations can yield a sidelobe canceler CFARdetection criterion for radar and communications. Performance analyses based on the probability of detection (PD)versus signal-to-noise ratio for several given fixed false alarm probabilities are presented. Finally these performance curves are validated by computer simulations of the detection process which use real image data with artificially implanted signals.     

Design and application of an Electric Tail Rotor Drive Control (ETRDC) for helicopters with performance tests

With the development of electric helicopters’ motor technology and the widespread use of electric drive rotors, more aircraft use electric rotors to provide thrust and directional control. For a helicopter tail rotor, the wake of the main rotor influences the tail rotor’s inflow and wake. In the procedure of controlling, crosswind will also cause changes to the tail disk load. This paper describes requirements and design principles of an electric motor drive and variable pitch tail rotor system. A particular spoke-type architecture of the motor is designed, and the performance of blades is analyzed by the CFD method. The demand for simplicity of moving parts and strict constraints on the weight of a helicopter makes the design of electrical and mechanical components challenging. Different solutions have been investigated to propose an effective alternative to the mechanical actuation system. A test platform is constructed which can collect the dynamic response of the thrust control. The enhancement of the response speed due to an individual motor speed control and variable-pitch system is validated.     

基于IRL技术的智能采样系统设计

在模拟信号易受干扰、不稳定的环境下 ,普通的采样系统往往不能适用 ,常常会因采样不准确而导致控制电路产生错误的控制信号 ,造成系统运行故障。我们采用基于IRL技术实现的采样电路系统能通过TCP IP远程监控采样电路的状况 ,并能在采样信号出错的情况下通过硬件重构进行信号增益、滤波等处理 ,消除模拟信号因外界干扰带来的变化影响 ,IRL技术给采样系统带来了高安全、高稳定以及易维护的特性