基于运动形态学的掠地飞行器视频检测方法

 结合数学形态学、视频图像运动分析以及数学统计分析方法，提出了一种用于空中预警控制系统(AWACS)的小型掠地飞行器运动形态学视频检测方法。该方法首先应用形态学tophat滤波提取出视频图像中的可疑目标(SO)，并求取SO的运动参数，利用真实目标和类目标干扰的不同运动特性，应用数学统计的方法对各运动参数进行分析以剔除部分类目标干扰，从而获得潜在目标(PT)的灰度分布和运动参数。在应用形态学tophat滤波器进行可疑目标提取中，一种新的金字塔型结构元的引入有效减少了虚警数量。外场试验表明，该检测方法能够有效抑制航拍掠地飞行器视频图像中的地物干扰，降低虚警目标的数量。     

世界航空动力技术的现状及发展动向

讲述了喷气战斗机动力的发展历程.推重比8一级发动机是目前世界各发达国家现役主战机种的动力,配装推重比10一级发动机的第4代战斗机预计在2003～2007年后陆续装备使用,成为美国、部分西方国家甚至我国部分周边国家和地区2010年后的主战机种.概括了民用涡扇发动机和直升机动力的发展及其主要关键技术.列举了21世纪航空动力主要关键技术的发展方向.     

低高度空间高能质子通量分布计算

介绍了AP-8模式、CRRESPRO模式和PSB97模式,并用这3种模式分别计算低高度空间300—1100km范围内的高能质子通量分布,由IDL软件绘出通量等值线图．AP-8模式通量主要受银河宇宙线调制,即受太阳活动直接影响,与太阳活动高年相比,太阳活动低年的质子通量较大;CRRESPRO模式中,因活动期和平静期的数据采集时间前后相差很短,从而使同一高度上两种环境条件下的通量分布相似．模式之间的比较结果表明,AP-8模式通量较小,CRRESFRO模式通量较大,PSB97模式通量介于二者之间,并与实测通量接近．PSB97是为低高度(1000km以下)定制的模式,在低高度上优于AP-8模式和CRRESPRO模式,能较好地计算当前条件下的低高度高能质子通量．     

火星磁层顶形成和变化的理论研究

考虑太阳风动压与行星电离层中的带电粒子热压及磁压之和平衡，建立了有大气（电离层）的行星磁层顶形成的理论模型，结合卫星对火星的观测数据，对子午面内向日侧火星磁层顶位形进行了数值计算和分析，研究了火星磁层顶位形及其与太阳风动压之间的变化关系．结果认为，火星磁层顶位形与地球磁层顶相似．太阳风动压越大，火星磁层顶越靠近火星；太阳风动压越弱，火星磁层顶越远离火星．根据火星内秉磁矩从古到今逐渐减小的观点，探索了大尺度磁场（内禀磁矩）对火星磁层顶的贡献作用，结果认为大尺度磁场越强，火星磁层顶越远离行星．这对于进一步研究火星磁层的长期演化以及其他行星磁层的位形变化都具有重要的意义．     

平台摇摆对卡尔曼滤波跟踪精度的影响

通过建立目标相对运动坐标系和目标相对运动观测模型,研究了在平台摇摆影响下,跟踪系统观测到的目标运动状态的变化。在分析捷联垂直基准补偿原理的基础上建立了捷联垂直基准平台摇摆角补偿模型,建立的模型结合捷联垂直基准系统的测量能力对其补偿算法进行了理论推导,使模型适用于实际捷联垂直基准系统。通过建立模型以及仿真研究了平台摇摆作用下卡尔曼滤波跟踪精度的变化,指出了摆造成卡尔曼滤波跟踪精度降低甚至离散的主要原因在于模型误差增大。设计仿真实验验证了结论的正确性,为进一步改进跟踪手段提供了理论参考。     

A new dynamic pushback control method for reducing fuel-burn costs: Using predicted taxi-out time

Long departure-taxi-out time leads to significant airport surface congestion, fuel-burn costs, and excessive emissions of greenhouse gases. To reduce these undesirable effects, a Predicted taxi-out time-based Dynamic Pushback Control(PDPC) method is proposed. The implementation of this method requires two steps: first, the taxi-out times for aircraft are predicted by the leastsquares support-vector regression approach of which the parameters are optimized by an introduced improved Firefly algorithm. Then, a dynamic pushback control model equipped with a linear gate-hold penalty function is built, along with a proposed iterative taxiway queue-threshold optimization algorithm for solving the model. A case study with data obtained from Beijing International airport(PEK) is presented. The taxi-out time prediction model achieves predictive accuracy within 3 min and 5 min by 84.71% and 95.66%, respectively. The results of the proposed pushback method show that total operation cost and fuel-burn cost achieve a 14.0% and 21.1%reduction, respectively, as compared to the traditional K-control policy.(3) From the perspective of implementation, using PDPC policy can significantly reduce the queue length in taxiway and taxi-out time. The total operation cost and fuel-burn cost can be curtailed by 37.2% and 52.1%,respectively, as compared to the non-enforcement of any pushback control mechanism. These results show that the proposed pushback control model can reduce fuel-burn costs and airport surface congestion effectively.     

一种卫星信道的反馈优化接入机制

提高卫星信道资源利用率，探索高效可行的端站接入机制是卫星通信发展亟待解决的问题之一。当前卫星通信DVB-RCS标准基于带宽预先规划的接入机制与端站随遇接入的需求矛盾凸显，因此提出一套信道反馈优化接入机制，综合考虑各端站数据业务需求，在不改变原有协议信令特征的基础上，探索性地引入谦虚度激励方法，创造性地构造动态协商反馈模型并加以求解，达到提高端站接入数量、满足随遇接入需求、提升信道利用效率、最大化整体带宽通信业务效益的目的。通过试验验证，带宽分配反馈优化机制比传统模式提高近1倍接入率，最大端站数接入时算法耗时约只有0.67s，可为卫星信道使用提供技术参考。     

A surface parametric control and global optimization method for axial flow compressor blades

An aerodynamic optimization method for axial flow compressor blades available for engineering is developed in this paper. Bezier surface is adopted as parameterization method to control the suction surface of the blades, which brings the following advantages:(A) significantly reducing design variables;(B) easy to ensure the mechanical strength of rotating blades;(C) better physical understanding;(D) easy to achieve smooth surface. The Improved Artificial Bee Colony(IABC) algorithm, which significantly increases the convergence speed and global optimization ability, is adopted to find the optimal result. A new engineering optimization tool is constructed by combining the surface parametric control method, the IABC algorithm, with a verified Computational Fluid Dynamics(CFD) simulation method, and it has been successfully applied in the aerodynamic optimization for a single-row transonic rotor(Rotor 37) and a single-stage transonic axialflow compressor(Stage 35). With the constraint that the relative change in the flow rate is less than0.5% and the total pressure ratio does not decrease, within the acceptable time in engineering, the adiabatic efficiency of Rotor 37 at design point increases by 1.02%, while its surge margin 0.84%,and the adiabatic efficiency of Stage 35 0.54%, while its surge margin 1.11% after optimization, to verify the effectiveness and potential in engineering of this new tool for optimization of axial compressor blade.