Statistical analysis of experimental study results on low-cycle fatigue resistance for the EI698-VD high-temperature alloy

The results of low-cycle fatigue tests of smooth cylindrical specimens made of the EI698-VD nickel-base high-temperature alloy widely used in aircraft engine industry are considered statistically. The influence of such factors as an initial level of mechanical properties, operating time and temperature of tests is evaluated. The experimental data on low-cycle fatigue (LCF) are used when determining the cyclic life for disks.     

On-board statistical detection and compensation of anomalous pilot-aircraft interactions

A statistical method for the on-board detection and compensation of adverse oscillations in pilot-aircraft systems is presented. A recursively updated linear model representing the pilot-aircraft system is used to continuously check for stability loss. The instability-related oscillations are detected early, using a statistical hypothesis test. Furthermore, a specially designed stability augmentation system assists the pilot during the instability periods. The method's effectiveness is demonstrated via data obtained from a flight simulator and a detailed simulation model.     

Performance characteristics of lithium ion cells at low temperatures

The low temperature charge and discharge characteristics of experimental MCMB-Li/sub x/Ni/sub y/Co/sub 1-y/O/sub 2/ cells containing different electrolytes were investigated. The use of low ethylene carbonate (EC)-content electrolyte formulations has resulted in good discharge performance to temperatures as low as -40/spl deg/C. The effect of charge voltage and charge current upon the individual electrode potentials at low temperature was investigated using the three electrode cells (containing lithium reference electrodes). In some cases, lithium plating was observed to occur upon low temperature charge, and found to be facilitated by high charge voltages, high charge currents, and poor anode kinetics. Electrochemical characterization of the cells has helped to establish the conditions under which lithium plating can occur by providing information regarding the polarization effects present at each electrode.     

Motor coordination in weightless conditions revealed by long-term microgravity adaptation.

The functional approach to studying human motor systems attempts to give a better understanding of the processes behind planning movements and their coordinated performance by relying on weightlessness as a particularly enlightening experimental condition. Indeed, quantitative monitoring of sensorimotor adaptation of subjects exposed to weightlessness outlines the functional role of gravity in motor and postural organization. The recent accessibility of the MIR Space Station has allowed for the first time experimental quantitative kinematic analysis of long-term sensorimotor and postural adaptation to the weightless environment though opto-electronic techniques. In the frame of the EUROMIR'95 Mission, two protocols of voluntary posture perturbation (erect posture, EP; forward trunk bending, FTB) were carried out during four months of microgravity exposure. Results show that postural strategies for quasistatic body orientation in weightlessness are based on the alignment of geometrical body axes (head and trunk) along external references. A proper whole body positioning appears to be recovered only after months of microgravity exposure. By contrast, typically, terrestrial strategies of co-ordination between movement and posture are promptly restored and used when performing motor activities in the weightless environment. This result is explained under the assumption that there may be different sensorimotor integration processes for static and dynamic postural function and that the organisation of coordinated movement might rely stably on egocentric references and kinematics synergies for motor control.     

Steady, pseudo-steady and unsteady shock wave reflections

The reflection of oblique shock waves has been the subject of numerous experimental, analytical and numerical studies in the past five decades. In the past six years three reviews have been published on various aspects of shock wave phenomena by Griffith (1981), Bazhenova et al. (1984) and Hornung (1985). However, these reviews were not devoted completely to shock wave reflection phenomena and as such they are more limited in scope than the present review. Furthermore, the developments since these reviews were written suggested a need for an up-to-date comprehensive review. The present review is aimed at describing in detail the entire shock wave reflection phenomenon from a phenomenological point of view. It is divided into three parts. The first is dedicated to the reflection in pseudo-steady flows, e.g., shock tube experiments over straight wedges, the second concentrates on steady flows, e.g., wind tunnel experiments, and the third describes the phenomenon in truly unsteady flows, e.g., shock tube experiment over non-straight wedges, spherical blast wave reflections, etc. In each of these flow patterns, unsolved problems are discussed and future research needs are identified. In order to keep this review within an acceptable size it was decided not to include details of numerical studies. Whenever possible the nomenclature is the one suggested by Ben-Dor and Dewey (1985).     

Interaction of artificially injected plasma flows with ionospheric plasma

Results of rocket experiments on study of plasma flows (PF) artificially injected by sources separated from vehicles and their effect on medium parameters in ionosphere at altitudes 160:230 km are presented.PF were injected comprising lithium ions with velocities 1,2 x 10⁴ m/sec. and cesium-potassium ions with velocities (1,4–1,5)x10³ m/sec. Mass flow rate in case of lithium PS is 2 mg/sec, and in case of cesium-potassium PS is 0,2 g/sec. During experiments mass-spectrometer measurements of ion medium content in ranges of different ion masses were held, disturbancies of electric fields with frequencies up to 20 kHz and electron flows with energies 0,7keV, 4,6keV and over 40 keV were controlled at distancies from 150m to (500–600)m between plasma source and scientific equipment.     

Multiple moving target detection and trajectory estimation using a single SAR sensor

A novel methodology is presented for determining the velocity and location of multiple moving targets using a single strip-map synthetic aperture radar (SAR) sensor. The so-called azimuth position uncertainty problem is therefore solved. The method exploits the structure of the amplitude and phase modulations of the returned echo from a moving target in the Fourier domain. A crucial step in the whole processing scheme is a matched filtering, depending on the moving target parameters, that simultaneously accounts for range migration and compresses two-dimensional signatures into one-dimensional ones without losing moving target information. A generalized likelihood ratio test approach is adopted to detect moving targets and derive their trajectory parameters. The effectiveness of the method is illustrated with synthetic and real data covering a wide range of targets velocities and signal-to-clutter ratios (SCRs). Even in the case of parallel to platform moving target motion, the most unfavorable scenario, the proposed method yields good results for, roughly, SCR > 10 dB.     

Avionics data buses: an overview

An overview of military avionics data buses and their applications, with the emphasis on optical fiber networking techniques. The evolution of military avionics data buses is discussed. The development trend actually reflects an increasing demand on such data buses, which requires the change from low-speed to high-speed transmissions, from single-rate to dual-rate operations, and from centralized control to distributed control. Recent progress in military avionics networks is described.     

Convective motions in liquid metals for material processings. Numerical simulation of oscillation regimes and effect of rotation

The paper is concerned with the numerical simulation and the analysis of some kinds of flow regimes which can develop in Bridgman and Czochralski systems for material processings. The flows in the liquid phase are investigated considering two-dimensional and axisymmetric models. The time-dependent regimes were studied for a zero-Prandtl-number fluid layer confined inside a two-dimensional cavity of aspect ratio (length-to-height) A=4, involving a stress-free upper surface and submitted to a horizontal temperature gradient. The range of Grashof number was varied up to the conditions at which the flow goes from oscillatory to chaotic type behaviours. The combined influence of the temperature gradients and of the rotations of the crucible and of the seed/crystal was investigated for a Czochralski model. The axisymmetric regimes were studied for a Pr_m=0.015 liquid melt confined inside a cylindrical crucible of aspect ratio (height-to-radius) A_m=2, and coupled to a viscous encapsulant liquid layer (10<Pr_e<1200) of aspect ratio A_e=0.5. A number of steady and (transient) time-dependent flow patterns are identified.     

The Rosat mission

The primary scientific objective of the ROSAT mission is to perform the first all sky survey with an imaging X-ray telescope leading to an improvement in sensitivity by several orders of magnitude compared with previous surveys. Consequently a large number of new sources (> 10⁵) will be discovered and located with an accuracy of 1 arcmin. After completion of the survey which will take about half a year the instrument will be used for detailed observations of selected targets.The X-ray telescope consists of a fourfold nested Wolter type I mirror system with 80 cm aperture and 240 cm focal length, and three focal plane detectors. In the baseline version these will be imaging proportional counters (0.1 – 2 keV) providing a field of view of 2⁰ × 2⁰.