Nickel-Cadmium Batteries as Capacitive Filters for Pulsed Loads

This investigation consisted of several tests of specially fabricated nickel-cadmium batteries having circular disk-type electrodes. These batteries were evaluated as filter elements between a constant current power supply and a 5 Hz pulsed load demanding approximately twice the power supply current during the load on a portion of the cycle. Short tests lasting 104 cycles were conducted at up to a 21 C rate and an equivalent energy density of over 40 J/Ib. In addition, two batteries were subjected to 10h dischar cycles, one at a 6.5 C rate and the other at a 13 C rate. Assuming an electrode-to-battery weight ratio of 0.5, these tests represent an energy density of about 7 and 14 J/Ib, respectively. Energy density, efficiency, capacitance, average voltage, and available capacity were tracked during these tests. After 10y capacity degradation was negligible for one battery and about 20 percent for the other. Cadmium electrode failure may be the factor limiting lifetime at extremely low depth of discharge cycling. The output was examined and a simple equivalent circuit was proposed.     

Extraction of mineral elements from inedible wastes of biological components of a life-support system and their utilization for plant nutrition.

Two methods of extracting mineral elements from otherwise deadlock products of a life-support system are presented. We describe first optimum conditions for recovering elements by water extraction from dry wastes of plants, biomass ash, and solid human wastes after passing them through the catalytic furnace; and, second, we describe acid extracts of biogenous elements by 1N and 2N HNO3 from these products. Ways to use the extracts of elements in plant nutrition are considered in order to increase the extent to which the mineral loop of a life-support system can be closed.     

Approximate qualitative spatial reasoning

Qualitative relations between spatial regions play an importantrole in the representation and manipulation of spatial knowledge.The RCC5 and RCC8 systems of relations,used in the Region-Connection Calculus, are of fundamentalimportance. These two systems deal with ideal regions havingprecisely determined location. However,in many practical examples of spatial reasoning,regions are represented by finite approximations rather than known precisely.Approximations may be given by describing how a regionrelates to cells forming a partition of the space underconsideration. Although the RCC5 and RCC8 systems have beengeneralized to ``egg-yolk' regions, in order to modelcertain types of vagueness, their extension to regionsapproximated in this way has not been discussed before.This paper presents two methods, the syntactic and the semantic, by which the RCC5 and RCC8 systemsmay be defined for approximate regions. The syntactic uses algebraicoperations on approximate regions which generalize operations on preciseregions. The semantic method makes use of the set of preciseregions which could be the intended interpretation of anapproximate region. Relationships between these two methods arediscussed in detail.alternative to navigation training with a map.     

Landsat-4 orbit determination using TDRSS

This paper presents the results of a study to compare the orbit determination accuracy for a Tracking and Data Relay Satellite (TDRS) System (TDRSS)-user spacecraft, Landsat-4, obtained using a Prototype Filter Smoother (PFS), with the accuracy of an established batch-least-squares system, the Goddard Trajectory Determination System (GTDS). The results of Landsat-4 orbit determination provide useful experience for the Earth Observing System (EOS) series of satellites. The filtered and smoothed PFS orbit solutions were compared with the definitive GTDS orbit solutions for Landsat-4; the root-mean-square (RMS) solution difference was 6.6 meters.     

Consideration in selecting crops for the human-rated life support system: a Linear Programming model.

A Linear Programming model has been constructed which aids in selecting appropriate crops for CELSS (Controlled Environment Life Support System) food production. A team of Controlled Environment Agriculture (CEA) faculty, staff, graduate students and invited experts representing more than a dozen disciplines, provided a wide range of expertise in developing the model and the crop production program. The model incorporates nutritional content and controlled-environment based production yields of carefully chosen crops into a framework where a crop mix can be constructed to suit the astronauts' needs. The crew's nutritional requirements can be adequately satisfied with only a few crops (assuming vitamin mineral supplements are provided) but this will not be satisfactory from a culinary standpoint. This model is flexible enough that taste and variety driven food choices can be built into the model.     

Decay rate of the second radiation belt.

Variations in the Earth's trapped (Van Allen) belts produced by solar flare particle events are not well understood. Few observations of increases in particle populations have been reported. This is particularly true for effects in low Earth orbit, where manned spaceflights are conducted. This paper reports the existence of a second proton belt and it's subsequent decay as measured by a tissue-equivalent proportional counter and a particle spectrometer on five Space Shuttle flights covering an eighteen-month period. The creation of this second belt is attributed to the injection of particles from a solar particle event which occurred at 2246 UT, March 22, 1991. Comparisons with observations onboard the Russian Mir space station and other unmanned satellites are made. Shuttle measurements and data from other spacecraft are used to determine that the e-folding time of the peak of the second proton belt. It was ten months. Proton populations in the second belt returned to values of quiescent times within eighteen months. The increase in absorbed dose attributed to protons in the second belt was approximately 20%. Passive dosimeter measurements were in good agreement with this value.     

Photometric calibration and first results obtained with the UFT experiment on board the astron satellite

The UV telescope of 30 cm diameter equipped with a three channel scanner spectrometer aboard the highly eccentric orbit space station “ASTRON” is describedAbsolute calibration of the whole device is performed using spectra of standard stars, of which absolute values were obtained by TDI or IUE experiments. Several photometric controls have been made on the stability of the equipment after one year of operation which demonstrate reliability of some first results obtained by the UFT.The sensitivity curve of the spectrophotometric system has been observed with a reproducibility of 2σ = 10% or better.The repeated observation of one star (139 Tau) indicates that the overall performance exhibits the same quality after one year in orbit. The low resolution mode ($\text{Δ λ = 28}\text{A}\text{?}$) leads to a powerful new investigation of faint extended sources.     

Foliage attenuation and backscatter analysis of SAR imagery

The ability of a synthetic aperture radar (SAR) to detect targets under foliage is in part determined by the attenuation suffered by radiation propagating through the foliage and the backscatter from the foliage. MIT Lincoln Laboratory made measurements of foliage attenuation and backscatter using the NASA/JPL-UHF, L-, C-band fully-polarimetric SAR in July 1990. In this experiment, a 48 km² forested area near Portage, Maine was imaged. Twenty-seven 8 ft trihedral corner reflectors were arrayed throughout the imaged area in order to measure foliage attenuation. Ground truth was recorded at the time of the experiment in order to correlate the attenuation and backscatter results with foliage biophysical properties. The probability densities for foliage attenuation and for backscatter are determined as functions of frequency, polarization, and depression angle