月球的构造格架及其演化差异

根据以GRAIL重力场数据和LOLA地形数据计算的月壳厚度,将月球构造格架初步划分为三个构造单元:主要覆盖月球正面风暴洋区域的月海构造单元、主要覆盖月球背面高地的月陆构造单元以及主要位于南半球背面的南极艾肯盆地构造单元。结合最新的研究成果,对各构造单元上的重大地质事件包括岩浆事件、火山事件和撞击事件分别进行了简单的梳理,结果表明月球不同构造单元的演化事件具有明显的差异。     

嫦娥4号发现月球背面幔源物质初步证据

<正>中国科学院国家天文台网站2019年5月16日报道,由李春来研究员领导的研究团队利用嫦娥4号(Chang'E-4)就位光谱探测数据,证明了月球背面南极-艾特肯盆地(SPA)存在以橄榄石和低钙辉石为主的深部物质,为解答月幔物质组成的问题提供了直接证据,并能够为完善月球形成与演化模型提供支撑。相关论文发表在Nature上。有关月球早期演化的理论认为,月壳是由岩浆     

“嫦娥4号”月球背面着陆区月壳及深部结构特征

深部月壳和月幔物质结构是月球科学探测的关键问题之一。“嫦娥4号”初步将月球背面南极—艾肯（South Pole-Aitken,SPA）盆地内的冯·卡门（Von Kármán）撞击坑作为着陆点,具有重要的科学研究价值。结合月球重力、地形、布格重力、月壳厚度等地球物理数据,综合对冯·卡门撞击坑的月壳及其深部结构特征进行了分析。结果显示：冯·卡门撞击坑重复撞击到南部的冯·卡门M撞击坑上,后者的中央峰具有明显的布格正重力异常和线性的布格重力梯度特征,显示出高密度的幔部物质向上涌起;冯·卡门撞击坑极有可能穿透了该区域的整个月壳,并挖掘出了深部月幔的物质;该区域南部月壳厚度较薄小于5 km,北部平均月壳厚度在15～20 km,月壳平均密度为2 630 kg·m^-3,比背面高地月壳密度高,且平均孔隙度为9%,低于月球的平均孔隙度12%。     

基于非线性混合模型研究太空风化对月壤光谱的影响

月表太空风化会改变月壤光谱特征, 影响月壤元素遥感反演精度. 研究太空风化对月壤光谱的影响有助于开发月壤成熟度光谱解耦算法, 提高月壤成分遥感反演精度. 直接对比月壤风化前后光谱的变化能最真实反映太空风化对光谱的影响, 但无法获取未风化的月壤样品, 利用实验室模拟方法开展研究也存在缺陷. 本文提出了一种简便的方法来研究太空风化对月壤光谱的影响, 并以月海样品为例进行探讨. 利用Hapke模型对月海样品组成矿物光谱按照实测含量进行非线性混合, 并通过对比混合后的光谱与实测的月壤光谱, 研究太空风化过程对月壤光谱的影响. 研究结果表明, 月壤在遭受太空风化后反射率降低, 波长越短降低越显著; 月壤背景吸收斜率增大, 月壤变得更红, 月壤矿物特征吸收峰深度降低, 光谱对比度变弱, 长波吸收峰(2.0μm附近)深度降低程度超过短波吸收峰(1.0μm附近)深度. 未来在利用遥感技术反演月壤元素含量时, 必须考虑这些因素.      

月球背面地形对软着陆探测的影响分析

相对于月球正面大面积平坦的月海区域,月球背面地形整体崎岖复杂,因此地形地貌的变化会对探测器的软着陆探测产生一定的影响。从任务设计、着陆器设计和月面工作程序3个方面分析了"嫦娥4号"着陆区南极–艾特肯盆地(South-Pole Aitken Basin,SPA),及其相对于"嫦娥3号"着陆区的变化,主要结论包括:1)着陆区范围缩小,由"嫦娥3号"着陆区经度范围16.4°和纬度范围3°,减小到经度范围约4°和纬度范围约2°;2)动力下降策略更改,动力下降过程主减速段结束后,着陆器由斜向前运动轨迹改为接近垂直向下运动轨迹,同时更改测距敏感器的引入时机;3)提高微波测距测速敏感器信号发射功率和信噪比;4)着陆后需要预测着陆器的光照和测控被地形遮挡的情况,然后制定如休眠或月食模式等相应策略等。通过以上优化设计,"嫦娥4号"任务可适应月球背面地形地貌的变化,有效降低着陆过程和月面工作的风险。     

月球主要构造特征：嫦娥一号月球影像初步研究

月球在31亿年前已基本停止地质活动,从而保留了其形成初期的信息．这些信息对于认识月球、地球乃至太阳系的形成演化具有重要意义．在已有研究成果的基础上,结合嫦娥一号探月卫星CCD影像数据,从月海穹窿、撞击坑、月岭、断裂、月坑链、月溪及月谷等方面介绍了月球主要构造形式的地质特征、形貌特征及遥感影像特征,对其成因以及所隐含的地质意义进行了分析．结果表明,嫦娥一号CCD影像信息丰富,影像清晰,利用其CCD影像数据进一步研究月球的构造现象是可行的．     

基于多因子综合评估的月球探测软着陆区域及最佳巡航路线分析

选择合适的软着陆区域及规划合理的巡航路线是月球探测的基础工作。以位于月球背面南极—艾肯（South Pole-Aitken,SPA）盆地内的冯·卡门（Von Kármán）撞击坑作为研究区域,综合使用多因子分析评估了月球探测的着陆区域和巡航路线。评价体系主要包括能表征着陆安全性的撞击坑的密度、撞击坑的影响区域、整个区域的平整情况、部分区域的平整情况等因子和体现科学探索意义的区域垂直结构、岩石属性和（FeO+TiO₂）含量等因子,其中科学探索的评估分析是在安全可行性的基础上进行的。结果表明：在多因子叠加分析的基础上可选择出A、B及C 3个着陆区,并通过科学研究因子分析出路线2及路线3为合适的巡航路线。本研究为月球探测器着陆和巡航路线的规划提供了科学依据,为后续的月球探测工作提供了技术支持。     

极月轨道上太阳电池阵外热流规律分析

准确的月球表面温度分布模型对于开展月球探测具有重要意义. 目前有关月球表面温 度模型还缺乏对完整月球表面温度分布的计算方法研究. 本文建立了一套计算完整月球表面温度的方法, 其中月球阳面温度采用Racca模型直接计算得到; 对于月球阴面, 将其沿纬度方向划分为若干区域, 每个区域的地表土壤采用一维非稳态热传导模型, 根据嫦娥三号着陆器太阳电池阵在轨环月阶段的温度数据, 修正得到月球表面土壤导热系数、密度及比热容, 通过数值计算求解一维非稳态热传导方程, 得出任意时刻月球阴面表面温度随时间的变化. 嫦娥三号着陆器太阳电池阵环月阶段热分析结果与在轨温度符合较好, 初步说明本文建立的完整月球表面温度计算方法正确可行. 基于本文方法计算得到整个月球表面温度分布, 进一步研究了极月轨道太阳电池阵外热流变化规律.      

基于场理论的“嫦娥4号”着陆区亮温时空分布特征研究

“嫦娥4号”（Chang’e-4）将首次实现在月球背面软着陆,而着陆区初步定为月球背面南极–艾肯（South Pole-Aitken,SPA）盆地内的冯·卡门（Von Kármán）撞击坑。利用“嫦娥”微波辐射计穿透性强的特点,针对微波辐射亮温缺乏场分析的问题,从场观点出发利用SVD方法分析冯·卡门撞击坑的亮温时空分布特征。结果表明冯·卡门撞击坑的3 GHz昼夜亮温场和37 GHz昼夜亮温场之间存在显著的耦合模态,同时在撞击坑内的亮温变化趋势相对一致;FeO+TiO₂（FTA）含量高的区域其相关性较高,也是亮温变化的关键区域,但是其等值线密度和FTA含量没有明显相关关系,主要和月表粗糙度相关。最后通过分析冯·卡门撞击坑的亮温时空分布特征综合地形特征、地层单元和物质化学成分等因素,为Chang’e-4着陆区的选择提供了参考。     

月表温度和地形对科研站选址的影响

月球极区具有独特的地理特征和潜在的水冰资源,是未来月球科学探测和基地建设的优选区域。但月球极地具有太阳光照条件差异显著、月地直接通信范围有限、月表温度变化幅度大、地势陡峭等特点,对选址研究提出了巨大挑战。定量化地研究月球极地相对宜居区的温度和地形分布,对于深入探索月球极地具有重要意义。利用月球勘测轨道器(LRO)上搭载的激光高度计(LOLA)和辐射计(Diviner)的观测数据产品,建立了一种月球相对宜居区的评估方法;并以月球南极为目标选取了典型的相对宜居区,对相对宜居区内的表面温度的日变化和季节变化特征进行了研究,分析对比了各相对宜居区的地形坡度、表面粗糙度和地形高度分布等情况。其中区域A(Scott M附近)地处月球南极的相对高地(约3～7 km),坡度(中位数为8°)和表面粗糙度(小于2 m)适中;区域B(de Gerlache附近)最靠近南极中心,太阳可见度可高达0.8,坡度较陡(中位数为12.4°),表面粗糙度适中(小于2 m);区域C(Amundsen附近)的地势最低(约-1.8～-0.5 km),太阳可见度(小于0.6)和地球可见度(小于0.5)最小,地形坡度最缓(中位数...     

Overview of the Latest Scientific Results of China's Lunar Exploration Program

China's Chang'E-4 probe successfully landed on 3 January 2019 in Von Kármán crater within the South Pole-Aitken (SPA) basin on the lunar far side. Based on the data acquired by the scientific payloads onboard the lander and the rover, the researchers obtained the related information such as the geologic and tectonic setting of the landing area, compositional characteristics of the landing surface materials, dielectric permittivity and density of the lunar soil. The experiments confirmed the existence of materials dominated by olivine and low-calcium pyroxene in the SPA basin on the lunar far side, which preliminary revealed the geological evolution history of the SPA basin and even that of the early time lunar crust, as well as the tectonic setting and formation mechanism of the materials in the lunar interior. The researchers also inves-tigated the particle radiation, Linear Energy Transaction (LET) spectrum, and so forth on the lunar surface. The low-frequency radio observations were carried out on the lunar far side for the first time as well. This article summarizes the latest scientific results in the past years, focusing on the Chang'E-4 mission. Key words CLEP, Chang'E-4, Scientific objectives, Scientific payloads, Scientific results      

X-ray fluorescence spectrometrywith the SELENE orbiter

X-ray fluorescence spectrometry of the Moon using a CCD-based instrument “XRS” is planned with the SELENE (Selenological and Engineering Explorer) orbiter, which will be launched in 2003. In the Apollo 15 and 16 missions, elemental mapping of Mg, Al and Si has been performed at the lunar equatorial regions for only 9% of the total surface. Much improved datasets will be obtained by using the XRS to map most of major elements, for 90% coverage of the total surface, and within 20 km spatial resolution. Key scientific objectives are (a) to measure the global average of lunar surface composition for investigation of the overall properties of lunar crust, (b) to map the rock-type distribution to study the formation and evolution of the crust and the maria, and to speculate the origin of the dichotomy, (c) to survey the chemical pattern of lava flows, or bottoms of craters or basins, for surveying the vertical structure and composition of the lunar crust and mantle. We describe the XRS instrument.     

The South Pole-Aitken basin region,Moon: GIS-based geologic investigation using Kaguya elemental information

Using Geographic Information Systems (GIS), we performed comparative analysis among stratigraphic information and the Kaguya (SELENE) GRS data of the ∼2500-km-diameter South Pole-Aitken (SPA) basin and its surroundings. Results indicate that the surface rock materials (including ancient crater materials, mare basalts, and possible SPA impact melt) are average to slightly elevated in K and Th with respect to the rest of the Moon. Also, this study demonstrates that K and Th have not significantly changed since the formation of SPA. The elemental signatures of the impact basin of Fe, Ti, Si, O through time include evidence for resurfacing by ejecta materials and late-stage volcanism. The oldest surfaces of SPA are found to be oxygen-depleted during the heavy bombardment period relative to later stages of geologic development, followed by both an increase in silicon and oxygen, possibly due to ejecta sourced from outside of SPA, and subsequent modification due to mare basaltic volcanism, which increased iron and titanium within SPA. The influence of the distinct geologic history of SPA and surroundings on the mineralogic and elemental abundances is evident as shown in our investigation.     

Traverses for the ISECG-GER design reference mission for humans on the lunar surface

This study explores the Design Reference Mission (DRM) architecture developed by Hufenbach et al. (2015) as a prelude to the release of the 2018 Global Exploration Roadmap (GER) developed by the International Space Exploration Coordination Group (ISECG). The focus of this study is the exploration of the south polar region of the Moon, a region that has not been visited by any human missions, yet exhibits a multitude of scientifically important locations – the investigation of which will address long standing questions in lunar research. This DRM architecture involves five landing sites (Malapert massif, South Pole/Shackleton crater, Schrödinger basin, Antoniadi crater, and the South Pole-Aitken basin center), to be visited in sequential years by crew, beginning in 2028. Two Lunar Electric Rovers (LER) are proposed to be tele-robotically operated between sites to rendez-vous with crew at the time of the next landing. With engineering parameters in mind we explore the feasibility of tele-robotic operation of these LERs between lunar landing sites, and identify potential high interest sampling locations en-route. Additionally, in-depth sample collection and return traverses are identified for each individual landing site across key geologic terrains that also detail crew Extra-Vehicular Activity (EVA). Exploration at and between landing sites is designed to address a suite of National Research Council (2007) scientific concepts.     

CAS-1 lunar soil simulant

Lunar soil simulant is a geochemical reproduction of lunar regolith, and is needed for lunar science and engineering researches. This paper describes a new lunar soil simulant, CAS-1, prepared by the Chinese Academy of Sciences, to support lunar orbiter, soft-landing mission and sample return missions of China’s Lunar Exploration Program, which is scheduled for 2004–2020. Such simulants should match the samples returned from the Moon, all collected from the lunar regolith rather than outcrops. The average mineral and chemical composition of lunar soil sample returned from the Apollo 14 mission, which landed on the Fra Mauro Formation, is chosen as the model for the CAS-1 simulant. Source material for this simulant was a low-Ti basaltic scoria dated at 1600 years from the late Quaternary volcanic area in the Changbai Mountains of northeast China. The main minerals of this rock are pyroxene, olivine, and minor plagioclase, and about 20–40% modal glass. The scoria was analyzed by XRF and found to be chemically similar to Apollo 14 lunar sample 14163. It was crushed in an impact mill with a resulting median particle size 85.9 μm, similar to Apollo soils. Bulk density, shear resistance, complex permittivity, and reflectance spectra were also similar to Apollo 14 soil. We conclude that CAS-1 is an ideal lunar soil simulant for science and engineering research of future lunar exploration program.     

New findings and appraisal of structural control on polygonal impact crater rim-geometry,a study from Mare Fecunditatis,Moon

Polygonal Impact Craters (PICs), having a distinct polygonal rim geometry, are common on terrestrial planets, their natural satellites such as Earth’s Moon and the asteroids. The straight segments of PIC-rims are arguably subparallel or oblique to existing fracture/fault planes in their vicinity, and such pre-existing structural weak planes are considered responsible for the shape of the PICs. The Mare Fecunditatis, a lunar maria, preserves mappable PICs as well as different geomorphic features like wrinkle ridges, grabens and pit crater chains which owe their origin to either compressional or extensional faulting. To understand the structural control, if any, on the PIC-rim geometry in Mare Fecunditatis, PICs, both simple and complex, and the deformational features are mapped, superposition relations between them are observed and trends are compared. The comparison between frequency of rim segment trends of the two types of PICs with wrinkle ridges, grabens and pit crater chains, and also statistical correlation between them, interestingly indicate that the wrinkle ridges and grabens are found to have negligible or no influence on the rim geometry of the PICs. Wrinkle ridges, known to be a group of the Mare Fecunditatis' oldest deformation features, are older than most of the preserved craters and are likely to have had control over the PIC shape. However, lack of correlation between the trends of wrinkle ridges and PIC rims indicates that most of the craters were formed after the fractures beneath the old wrinkle ridges ceased to act as mechanical discontinuity planes due to possible induration caused by fracture-filling through concomitant and later magma injection. The PICs dispersed throughout the maria could have avoided the influence of the grabens, the majority of which are located near the margin of the maria. Pit crater chains with possible deep roots and still/recently continued dike activities, were the only available weak planes which could influence the PIC rim shapes.     

Understanding the mineralogy of a compositional anomaly north of the Korolev basin using Moon mineralogy mapper

The work attempts to understand the mineralogy of the reported geochemical anomaly located in the north – northeast region of the Korolev basin using Moon Mineralogy Mapper (M³) onboard Chandrayaan ?1 and other lunar datasets. To understand the mineralogy, colour composite images using integrated band depth parameters and mineral indices were prepared, and the M³ spectral signatures corresponding to the unique colours of these colours composites were investigated. Further, Modified Gaussian Model (MGM) deconvolution was applied to these spectra. The results of spectra studies reveal that the area is made up of heterogeneous lithologies, predominantly composed of anorthosite along with minor occurrences of pyroxene-bearing (both low-calcium and high-calcium variety) and spinel-bearing lithologies. Correlation of spectral studies with the morphology revealed that pyroxene was typically associated with fresh craters and their ejecta. Spinel was found to be ubiquitous and is well-dispersed, possibly distributed along with the ejecta blanket of large impact craters. This association hints that the pyroxene-hosted layer most likely occurs beneath the spinel-bearing layer. Such observed assemblages may have resulted from physical mixing during the impact cratering events. This mixed lithology could arise due to the mafic mineral-bearing ejecta of the South-Pole Aitken (SPA) basin and spinel-bearing Orientale ejecta. Korolev most likely impacted on a thick layer of SPA ejecta, and impact basins such as Hertzsprung and Orientale have occurred post-Korolev formation. Orientale being the youngest of the large impact basins, its ejecta carrying the light plain material would have overprinted the older SPA ejecta. Smaller impact craters would have churned the ejecta so that presently we observe a composite lithology with a variable abundance of pyroxene and spinel.     

模拟月壤研制的初步设想

模拟月壤是月球样品的地球化学复制品，作者总结世界上已有的5种模拟月壤JSC-1，MLS．1，MLS-2，MKS-1和FJS-1的研制过程、方法与基本理化性质，认为系列化模拟月壤研制对中国首次月球探测有重要意义，在此基础上，作者提出系列化模拟月壤研制的基本思路．     

Surface temperatures at the nearside of the Moon as a record of the radiation budget of Earth’s climate system

Understanding the balance between incoming radiation from the Sun and outgoing radiation from Earth is of critical importance in the study of climate change on Earth. As the only natural satellite of Earth, the Moon is a unique platform for the study of the disk-wide radiation budget of Earth. There are no complications from atmosphere, hydrosphere, or biosphere on the Moon. The nearside of the Moon allows for a focus on the solar radiation during its daytime, and on terrestrial radiation during its nighttime. Additionally, lunar regolith temperature is an amplifier of the terrestrial radiation signal because lunar temperature is proportional to the fourth square root of radiation as such is much more sensitive to the weak terrestrial radiation in nighttime than the strong solar radiation in daytime. Indeed, the long-term lunar surface temperature time series obtained inadvertently by the Heat Flow Experiment at the Apollo 15 landing site three decades ago may be the first important observation from deep space of both incoming and outgoing radiation of the terrestrial climate system. A revisit of the lunar surface temperature time series reveals distinct characteristics in lunar surface daytime and nighttime temperature variations, governed respectively by solar and terrestrial radiation.