高精度VLBI技术在深空探测中的应用

介绍了适合单探测器测定轨的高精度VLBI技术和适合多探测器测定位的同波束VLBI技术的研究进展。利用"嫦娥3号"着陆器的ΔDOR型VLBI观测,得到了误差0.67ns的VLBI群时延数据。利用"嫦娥3号"着陆器和月球车的同波束VLBI观测,得到了随机误差0.3ps的差分相时延数据,以数厘米的灵敏度监测出月球车的移动、转弯等动作,并把月球车的相对定位精度提高至1m。针对深空探测,提出了使VLBI时延测量精度进一步提高所需要开展的部分研究内容。     

嫦娥系列探月卫星无线电科学实验简介

在"嫦娥1/2/3号"系列探测任务中开展了行星无线电科学探测实验,这些工作包括:使用天文VLBI技术对探测器进行工程和科学测轨、定位观测,开环和闭环测速测距观测,基于微波观测重构和优化月球重力场模型,通过重力异常揭示质量瘤和撞击盆地。星载或器载主/被动雷达设备还用于探测月壤和月球内部结构。在"嫦娥2号"任务中,实现了对拉格朗日平动点利萨如轨道飞行的测控,以及对图塔蒂斯小行星的飞掠探测。在"嫦娥3号"任务中,实现了多通道开环3向相位测距和多普勒测速技术。该月球无线电相位测距技术LRPR作为一种新的空间测量技术,可以用于测定台站的位置、潮汐、星体的自转特性。还可以与月球激光测距技术LLR融合,监测月球动力学运动变化,并有潜力用于未来的火星探测任务。     

基于中国深空站的木星探测器开环测量试验

中国深空网的建立用以支持我国正在实施的探月工程及后续火星、小行星、木星等探测任务。为验证中国深空网的跟踪测量能力,并获取行星无线电测量数据,基于中国深空站开展了对木星在轨探测器"朱诺号"(Juno)的跟踪测量试验与数据处理分析。在分析各种观测约束条件的基础上,首次实现了中国深空站在地—木距离上的深空探测器开环跟踪测量,通过VLBI数据采集记录终端原始探测器信号,经信号处理提取"朱诺号"探测器的主载波频率。采用傅里叶变换(Fast Fourier Transform,FFT)、线性调频Z变化及信号本地重构相关的联合信号处理方法,"朱诺号"探测器主载波频率提取噪声水平在10μHz水平,有效验证了深空开环测量技术,为后续我国深空探测任务积累了有益经验。     

双站跟踪模式下“嫦娥4号”中继星定轨仿真分析

位于地月平动点的探测器因为较差的观测几何,需要地基USB/UXB与天文VLBI长时间的联合跟踪数据获取稳定精确的轨道。提出了利用中国深空网双站共视跟踪平动点探测器,获取双程、三程测距及VLBI测量数据,解算探测器精确轨道的模式。以"鹊桥"卫星为分析对象,首先评估中国深空网对"鹊桥"的跟踪能力。然后分析不同观测组合模式下的定轨计算精度。结果表明:双站共视约束下,深空站每天对"鹊桥"跟踪弧长大于5 h;使用长于6 h的双站跟踪数据进行定轨,系统差的解算更有利于轨道精度提升;跟踪时长超过2天时,必须在轨道解算的同时估计光压系数,并有望实现优于百米的轨道精度。     

用于太阳系天体VLBI观测的时延模型

VLBI观测技术可以用于对深空航天器的跟踪定位以及测速观测．这类近距离天体发出的射电信号波前是球面波．为此，本文提出了一个1ps精度下近距离射电天体地面VLBI观测时间延迟模型．     

一种用于深空导航定位的新型DOR信标

甚长基线干涉测量(VLBI)是深空探测器导航定位的重要手段之一,深空探测器的VLBI观测通常采用差分单程测距(DOR)信标和双差单程测距(Delta-DOR)测量体制,精确地测量深空探测器相对于河外射电源的角距.相位杂散是影响Delta-DOR测量精度的主要误差源之一,针对这项误差研究了一种基于伪随机噪声调制方式的新型...     

利用VLBI技术进行深空航天器跟踪的仿真分析

差分VLBI(D-VLBI)技术常用于测量航天器相对于参考射电源的角位置,用其跟踪深空航天器可取得足够高的精度。针对深空探测任务中D-VLBI技术的特性,提供了观测时间间隔的设置参考,通过仿真分析,研究了航天器和参考射电源之间的角距离、传播路径上的介质差异等因素及其对观测精度的影响,为后续深空航天器飞行任务的设计提供技术支持。     

面向绕月交会对接的同波束VLBI研究

针对"嫦娥5号"(CE-5)探测器间高精度相对测量需求,设计了我国深空干涉测量处理中心框架下的同波束VLBI处理算法,分析了X波段同波束VLBI相位解模糊条件和结果;通过引入群时延辅助的相位干涉技术,大幅抑制了干涉时延随机误差,为同波束VLBI中相位解模糊提供了先验条件;利用CE-5对接实测数据验证了本文工作的有效性,为CE-5任务同波束VLBI的实施奠定了基础。     

俄罗斯应用天文研究所月球历表研究现状

空间探测需要越来越高精度的观测和历表支持。俄罗斯科学院应用天文研究所研发了满足精度要求的月球历表EPM-ERA,它与同期的法国INPOP历表和美国DE历表比较,精度方面有微小差距。分析了进一步提高历表精度的方法。然而EPM-ERA仅仅依赖于法国和美国台站提供的月球激光测距LLR数据,为了克服这个限制,应用天文研究所在推进俄罗斯西伯利亚阿尔塔伊LLR地面站的重建任务,以改善LLR测站分布的几何构型。俄罗斯的月球-全球和月球-资源探月计划为改进月球历表提供了机会,参与了多次国际深空探测的俄罗斯VLBI网"QUASAR"也将参与这些俄罗斯月球探测计划的精密测轨跟踪。     

日本火星探测计划

1背景实施火星探测，美国、俄罗斯为主要核心国，他们共发射了26个火星探测器。从美国的6个（2个着陆装置）和俄罗斯的6个（2个着陆装置）火星探测器已获得了大量的探测数据。探测任务主要是从火星运行轨道进行科学性测定和通过着陆装置进行表土分析、生命探测。尤其是1976年着陆在火星上的海盗一l和2探测器，它们对火星进行了生命探测，但未能确认火星有生命存在。今后世界各国的火星探测计划侧重考虑降低成本：通过从轨道探测器向多种类型／分辨率提高型探测器过渡，进行火星表面及大气测量；通过穿透器进行火星地下的科学探测及水的存在…     

Autonomous navigation of Mars probe using X-ray pulsars: Modeling and results

Autonomous navigation of Mars probe is a main challenge due to the lack of dense ground tracking network measurements. In this paper, autonomous navigation of the Mars probe Orbits is investigated using the X-ray pulsars. A group of X-ray pulsars with high ranging accuracy are selected based on their properties and an adaptive extended Kalman filter is developed to incorporate the Mars probe dynamics and pulsar-based ranging measurements. Results of numerical experiment show that the three-dimensional positioning accuracy can achieve 750m in X-axis, 220m in Y-axis and 230m in Z-axis, which is much better than the positioning results by current Very Long Baseline Interferometry (VLBI) or Doppler observations with the accuracy of 150 km or several kilometers, respectively.     

火星探测UHF频段原位通信关键技术研究

火星是人类探索太阳系的下一个里程碑,由于地球和火星之间的距离非常遥远（最远距离约4亿千米,光行时约22min）,为了最大限度地完成火星车和地球之间的高效通信,火星车和火星环绕器之间的器间原位中继通信技术就显得尤为重要。针对大椭圆轨道下器间通信信噪比低、信号参数变化快、全自主要求高及质量功耗约束极为严苛等难点,提出了一种UHF频段器间原位通信技术,主要包括超高灵敏度高动态自适应信号解调、高精度多普勒测量、基于CCSDS Proximity-1的协议一体化集成融合和面向火星复杂环境的高集成度高收发隔离产品工程化设计,实现了捕获灵敏度优于-141dBm、解调灵敏度（1kbit/s）优于-134dBm、频率动态范围优于±26kHz、多普勒测量精度优于10mHz、收发隔离大于180dB、弧段内全自主高可靠高吞吐率通信及基于架构统型的系统/单机极限优化,相关指标优于美国系列火星探测器中的“Electra”。经祝融号火星车和天问一号火星环绕器、ESA“Mars Express”火星轨道器在轨实际测试,测试数据符合预期,为中国首次火星探测的圆满成功做出了重要贡献。     

Proposal of application of same beam VLBI measurements in precision orbit determination of lunar orbiter and return capsule and lunar gravity field simulation in Chang’E-3 mission

High accuracy differenced phase delay can be obtained by observing multiple point frequencies of two spacecraft using the same beam Very Long Baseline Interferometry (VLBI) technology. Its contribution in lunar spacecraft precision orbit determination has been performed during the Japanese lunar exploration mission SELENE. In consideration that there will be an orbiter and a return capsule flying around the moon during the Chinese lunar exploration future mission Chang’E-3, the contributions of the same beam VLBI in spacecraft precision orbit determination and lunar gravity field solution have been investigated. Our results show that the accuracy of precision orbit determination can be improved more than one order of magnitude after including the same beam VLBI measurements. There are significant improvements in accuracy of low and medium degree coefficients of lunar gravity field model obtained from combination of two way range and Doppler and the same beam VLBI measurements than the one that only uses two way range and Doppler data, and the accuracy of precision orbit determination can reach meter level.     

Chang’E-1 precision orbit determination and lunar gravity field solution

In this paper we present results assessing the role of Very Long Baseline Interferometry (VLBI) tracking data through precision orbit determination (POD) during the check-out phase for Chang’E-1, and the lunar gravity field solution CEGM-01 based on the orbital tracking data acquired during the nominal phase of the mission. The POD of Chang’E-1 is performed using S-band two-way Range and Range Rate (R&RR) data, together with VLBI delay and delay rate observations. The role of the VLBI data in the POD of Chang’E-1 is analyzed, and the resulting orbital accuracies are estimated for different solution strategies. The final orbital accuracies proved that the VLBI tracking data can improve the Chang’E-1 POD significantly. Consequently, CEGM-01 based on six-month tracking data during Chang’E-1 nominal mission phase is presented, and the accuracy of the model is assessed by means of the gravity field power spectrum, admittance and coherence between gravity and topography, lunar surface gravity anomaly and POD for both Chang’E-1 and Lunar Prospector (LP). Our analysis indicates that CEGM-01 has significant improvements over a prior model (i.e. GLGM-2), and shows the potential of Chang’E-1 tracking data in high resolution lunar gravity field model solution by combining with SELENE and LP tracking data.     

Three-dimensional tracking of a lunar satellite with differential Very-Long-Baseline-Interferometry

Lunar gravimetry mission in the Japanese lunar exploration project SELENE (Selenological and Engineering Explorer) is characterized by inter-satellite tracking by means of a relay satellite in a high eccentric orbit, combined with differential Very-Long-Baseline-Interferometry (ΔVLBI) and conventional 2-way Doppler tracking. ΔVLBI provides information on the satellite position and velocity complementary to conventional range and range rate measurement, and allows us to measure lunar gravitational accelerations in all the three components. In this article, ΔVLBI and 2-way Doppler numerical simulation results are compared to those obtained from 2-way Doppler observations only, so that we can evaluate the contribution of ΔVLBI to the SELENE lunar gravimetry mission.     

VLBI observations to the APOD satellite

The APOD (Atmospheric density detection and Precise Orbit Determination) is the first LEO (Low Earth Orbit) satellite in orbit co-located with a dual-frequency GNSS (GPS/BD) receiver, an SLR reflector, and a VLBI X/S dual band beacon. From the overlap statistics between consecutive solution arcs and the independent validation by SLR measurements, the orbit position deviation was below 10?cm before the on-board GNSS receiver got partially operational. In this paper, the focus is on the VLBI observations to the LEO satellite from multiple geodetic VLBI radio telescopes, since this is the first implementation of a dedicated VLBI transmitter in low Earth orbit. The practical problems of tracking a fast moving spacecraft with current VLBI ground infrastructure were solved and strong interferometric fringes were obtained by cross-correlation of APOD carrier and DOR (Differential One-way Ranging) signals. The precision in X-band time delay derived from 0.1?s integration time of the correlator output is on the level of 0.1?ns. The APOD observations demonstrate encouraging prospects of co-location of multiple space geodetic techniques in space, as a first prototype.     

Selenodetic experiments of SELENE: Relay subsatellite,differential VLBI,and laser altimeter

Since 1960s, the gravitational potential of the Moon has been extensively studied from Doppler tracking data between a ground station and spacecraft orbiting in front of the Moon (e. g., Lorell and Sjogren, 1968; Bills and Ferrari, 1980; Konopliv et al., 1993; Lemoine et al., 1997). Because direct radio communication is interrupted while spacecraft is orbiting behind the Moon, however, the coverage of tracking data has been limited mostly to the nearside of the Moon so far. In order to compensate for such lack of tracking data, we propose satellite-to-satellite Doppler measurement by using a relay subsatellite in Japanese mission to the Moon in 2003. A complete coverage of Doppler tracking from an orbiter at sufficiently low altitude will significantly improve lunar gravity model and will contribute for future geophysical study of interior and tectonics on the Moon. Further, we propose differential VLBI experiment between the subsatellite and a propulsion module landed on the surface of the Moon. The differential VLBI is about 10 times more accurate than conventional Doppler measurement for long-wavelength gravity field. Besides, differential VLBI is sensitive to the displacement perpendicular to the line of sight. Thus the VLBI experiment provides precise estimates of the lunar gravity potential at low degree. The last proposal for selenodetic experiments is a laser altimeter. Global topography model has been already developed from the analysis of Clementine LIDAR data (Zuber et al., 1994), but it is suggested that the model includes appreciable anisotropy between NS and E-W directions due to highly eccentric orbit of Clementine spacecraft (Bills and Lemoine, 1995). The laser altimeter experiment from an orbiter in nearly circular orbit will provide a new reference for the isotropic lunar topography model.     

火星车绝对定位方法选择

针对火星巡视探测任务,提出3种火星车绝对定位方法:无线电测控定位、图像匹配定位、位置圆定位。无线电测控方法首先确定环绕器的轨道,然后利用环绕器和火星车的器间通信定位确定火星车的绝对位置;图像匹配方法利用着陆过程中的降落图像与带地理信息的着陆区地形图进行匹配,实现火星车的位置确定;位置圆方法通过敏感器在多个时刻测量阳光矢量方向和重力矢量方向,结合星历信息求解火星车的位置。对3种方法进行分析比较,根据定位精度、使用约束等因素,给出在轨使用建议:位置圆定位为基本方法,无线电测控定位作为校验手段,图像匹配定位作为修正手段,以满足火星车快速、高精度的定位需求。