发动机羽流作用下的实时月尘运动仿真

月尘运动是月球探测器软着陆过程中不可或缺的重要环节,针对发动机羽流作用下月尘运动真实感不强和月尘颗粒运动模型过于简单的问题,提出了一种逼真的实时月尘运动仿真方法.通过计算流体动力学(CFD, Computational Fluid Dynamics)和二次谢别德插值(Quadratic Shepard)方法,分析和计算单个月尘颗粒的运动学模型,得到一定初始条件下粒子运动的二维轨迹曲线;通过分析粒子的数量、初始位置、初始速度、生命周期等参数对粒子运动学的影响和变化规律,抽象出月尘系统的粒子集;建立基于月尘粒子集的月尘运动模型.实验结果显示:该运动模型逼真的模拟了发动机羽流作用下月尘腾起、飞溅、弥漫、消散等运动过程,视觉真实感和实时性能良好,对研究真空环境中的月尘运动及月球软着陆等相关领域具有一定的参考意义.目前该方法已应用于北航虚拟现实国家重点实验室月球软着陆仿真系统.     

月球受光面上月尘静电浮扬特性分析

基于单粒子轨道理论及空间尘埃等离子体充电方程,建立了月球受光面上尘埃微粒的静态荷电模型.基于光电子能量Maxiwellian分布假设,确定了月面垂直空间电场强度和光电子鞘层内带电粒子密度的函数表达式.利用牛顿运动定律和静电场力表达式,构建了月球受光面上尘埃微粒的静电浮扬动力学模型,并进行月尘静态浮扬特性的数值计算.研究结果显示:太阳高度角与颗粒粒径是控制月尘静电浮扬发生及动力学特性的两个基本参量;月尘静电浮扬发生在月球的黎明和黄昏;随着粒径的减少,月尘颗粒的最大浮扬高度不断增加.     

月尘静电迁移研究进展

月尘的静电悬浮和迁移是Apollo时期留下的最有争议的问题之一. 其既是研 究月球表面物质演化历史的重要线索, 也是探月工程必须考虑的重要因素. 月尘在月表环境下易因电子附着、光电效应、二次电子发射等过程带电, 并 在月球全球性静电场作用下发生迁移运动. 但目前对月尘静电迁移过程的认 识还不全面, 其主要原因在于对月尘静电特性的了解不够准确, 对静电迁移 过程的地面模拟不够充分以及对月球尘埃环境的探测较为缺乏. 未来需进一 步开展模拟月尘的研制, 月尘静电特性的分析, 静电迁移过程模拟以及尘埃 环境的探测等工作.      

月尘/月壤环境效应地面模拟方法研究

月壤/月尘会附着并污染航天器、月球车的表面,如果不及时清除,还会进一步诱发部件过热、机械机构卡死、密封失效、材料磨损等一系列问题.本文综述了关于月尘特性、月尘与航天器系统的互相作用机理、月尘环境模拟方法等方面的研究成果,提出了一种小型月尘环境模拟系统的设计方案.该系统将使关于月尘特性的实验研究成为可能,并可作为登月飞船及月球车材料选择、机械机构可靠性试验、除尘策略试验的平台.      

悬浮月尘的遮挡模型

探月活动中,月表的尘埃会对太阳翼等光电器件的工作效率造成严重影响.基于附着月尘的遮挡模型,从立体空间的角度分析了悬浮月尘对工作器件的遮挡,提出了悬浮月尘的单粒度遮挡模型,利用月尘的平均粒度可计算在指定立体空间内,定量月尘造成的遮挡量;引入月尘的粒度分布函数,提出了悬浮月尘的多粒度遮挡模型,能够计算已知粒度分布函数的月尘在指定立体空间内造成的遮挡量;通过设计悬浮月尘遮挡的仿真实验,分别利用3种不同粒度大小的月尘进行实验,实验数据与悬浮月尘的单粒度、多粒度遮挡模型的理论计算值都较好吻合,实验结果证实了悬浮月尘遮挡模型的正确性与可靠性.      

Plasma electron temperature variability in lunar surface potential and in electric field under average solar wind conditions

The Moon is immersed in plasma environment. The most interesting challenge of the lunar plasma– field environment is that it is alternatively dominated by the extended but variable outer atmosphere of the Earth – the magnetosphere – and by the extended but highly variable solar atmosphere – the solar wind. Understanding the plasma environment and its interaction with the lunar surface will be beneficial to both manned and robotic surface exploration activities and to scientific investigations. Presented is a preliminary map of variations of lunar surface electric potential over the day side and night side using probe equations and a discussion on dust dynamics in this E-field structure using the data from Electron Reflectometer in Lunar Prospector spacecraft during 1998–1999. On the day side, potential is around 5 V and on the night side it reaches up to −82 V. On the night side region, only highly energetic electrons can overcome this large negative potential. The variation at electron temperature (T_e) strongly reflects in the surface potential. The potential reaches to a value of −82 V for T_e = 58 eV. Surface charging causes the electrostatic transport of charged dust grains. Dust grain size of 0.1 μm shows a levitation height of 4.92 m on lunar day side, 748 m on terminator region and 3.7 km on the night side. The radius of maximum sized grain to be lofted, R_max, peaks at the terminator region (R_max = 0.83 μm). At the transition region dust levitation is almost absent. This region is most suited for exploration activities as the region is free from hazards caused by lunar dust.     

太阳风电子在月表电磁场中的运动

月表磁异常区的分布是月球探测工程的重要内容. 但是由于月表电磁环境错综复 杂, 通常认为月球表面在特殊的空间天气条件下会带有数千伏电压. 以往的空间研究已经证实, 表面的带电与放电容易造成卫星仪器的异常或失联. 月表电场对电子 反射法有重要影响, 研究分析不同电磁条件下太阳风电子的运动轨迹,对月表环境 (电磁环境, 太阳风条件, 等离子体参数等)的研究可以更加深入细致. 通过模拟向月表运动的太阳风电子的运动轨迹, 分析了月表电磁环境的改变对太阳风电子反射 的影响, 并着重研究了月表电场对电子反射法遥感探测月表磁异常的影响, 为探测 月表电磁环境提供了重要的信息.      

Instrument study of the Lunar Dust eXplorer (LDX) for a lunar lander mission

One of the highest-priority issues for a future human or robotic lunar exploration is the lunar dust. This problem should be studied in depth in order to develop an environment model for a future lunar exploration. A future ESA lunar lander mission requires the measurement of dust transport phenomena above the lunar surface. Here, we describe an instrument design concept to measure slow and fast moving charged lunar dust which is based on the principle of charge induction. LDX has a low mass and measures the speed and trajectory of individual dust particles with sizes below one micrometer. Furthermore, LDX has an impact ionization target to monitor the interplanetary dust background. The sensor consists of three planes of segmented grid electrodes and each electrode is connected to an individual charge sensitive amplifier. Numerical signals were computed using the Coulomb software package. The LDX sensitive area is approximately 400 cm². Our simulations reveal trajectory uncertainties of better than 2° with an absolute position accuracy of better than 2 mm.     

模拟月壤铺粉过程DEM数值仿真

空基激光选区熔化（SLM）技术与原位资源利用（ISRU）概念结合，有望解决地外大规模基地建设的工程难题。SLM铺粉过程对成形件性能和质量有重要影响。基于非球形粒子叠加球模型方法，建立模拟月壤颗粒几何模型；基于线性弹簧-阻尼接触作用模型、Hamaker理论及牛顿运动定律，建立颗粒动力学模型；采用三维离散单元方法（DEM）及软球模型，进行不同工况下模拟月壤在铺粉过程中的流变特性研究。结果显示:所提模型和方法能开展指定工况和环境参数的模拟月壤颗粒系统流动性和堆积行为数值仿真研究；月面低重力环境导致粉床表面粗糙度变大、堆积密度和平均配位数变小；通过降低铺粉速度和优化刮刀型面，可以有效改善月基铺粉的粉床质量，获得更密实和均匀的粉床结构。      

太阳电池阵极月轨道在轨热分析

以极月轨道上太阳电池阵作为研究对象,详细分析了该轨道上电池阵所得各外热流的确定方法.以此为基础,对太阳电池阵进行在轨温度数值模拟,得到月球轨道上电池阵所得外热流以及温度的周期分布.计算结果与地球卫星的相应数据进行比较,明确了月球轨道上电池阵所得外热流以及温度的周期分布特点,为月球卫星上太阳电池阵以及整个卫星的设计提供了有利的数据参考.      

Effects of electrostatic forces on the vertical structure of planetary rings

We have calculated the vertical structure of planetary dust rings as it results from a balance between an electrostatic force on the dust grains and the vertical component of the gravitational force from the central planet. The electrostatic force results from the charging of the dust grains by the ambient plasma and a large scale electric field due to a shielding electric field and the resulting vertical dust distribution are strongly dependent on dust size, dust and plasma density, plasma temperature and plasma ion type. The dust density distribution has a different dependence on these parameters in tenuous and in dense dust rings. We solve the relevant equations numerically and also by linearization in the limiting cases of tenuous or dense rings. Our results indicate that the effects treated in this paper may be important in both Jupiter's and Saturn's rings.     

嫦娥三号巡视器有效载荷

嫦娥三号巡视器配置了全景相机、测月雷达、红外成像光谱仪、粒子激发X射线谱仪四种科学探测有效载荷. 介绍了有效载荷的科学探测任务、系统设计方案和系统组成,描述了各有效载荷的方案设计要点,设计中的主要关注点及主要技术指标等.      

Modeling the meteoric dust effect on the equatorial electrojet

Dust particles of meteoric origin in the lower E-region can affect the conductivity parameters by varying the effective collision frequency and by causing electron bite outs through the capture of ambient electrons. In magnetized plasma, neutral dust particles can alter the effective collision frequency parameters and thus affect the Pedersen and Hall conductivities in the electrojet region. The Cowling conductivity profile is determined by the height profiles of the Hall and Pedersen conductivities. The collision parameters altered by the neutral dust particles can be considerably different from those estimated from atmospheric models, in the lower E-region heights where dust particles of meteoric origin are known to exist in large numbers. A significant fraction of these dust particles may capture free electrons from the ambient medium and get charged negatively. This can result in reduction in the number density of free electrons especially below the electrojet peak where the dust particles can be present in large numbers, at least on days of large meteor showers. This, in turn, can once again alter the vertical profile of the east–west Hall current driven by the vertical Hall polarization field and under favorable conditions, can even account for the reversal of the electrojet currents below the current peak. Assuming a realistic model for the distribution of neutral dust particles, the conductivity parameters are estimated here. Conditions under which the dust particles can cause partial reversals in the electrojet currents are critically examined here.     

基于进化策略的月球软着陆探测器轨道设计

应用进化策略和微分修正法建立了一套多约束、多目标条件下的月球软着陆轨道设计方法. 根据中国发射场和火箭运载的实际情况, 给出了软着陆轨道需要满足的过程约束及终端条件, 提出了利用进化策略进行轨道初步设计,通过微分修正法对初步设计结果进行修正的软着陆轨道设计思路, 并采用STK进行了仿真和结果验算. 分析表明, 基于进化策略的初步设计能够为微分修正提供良好的初值, 保证了其收敛性. STK仿真结果验证了设计思路的有效性及结果的正确性. 本文提出的方法能够为月球软着陆轨道设计提供参考.      

月尘环境效应及地面模拟技术

介绍了月球尘的特点及其对探月活动的影响。在分析月球尘环境及其对月面探测器污染、磨损、阻塞、静电效应的基础上,对月球尘环境模拟技术、月球尘扬尘及其运动学和动力学规律、月球尘效应防护及试验评价方法等研究方向和重点提出了一些初步看法。针对研究内容的需求,梳理出一台完整的月球尘地面模拟试验设备应具备真空、温度、太阳风、太阳紫外、月球尘、月面电场、月面磁场等环境因素。在此基础上,设计了一种月球尘地面模拟试验装置方案,并对月球尘环境效应试验方法进行了初步讨论。为月球探测后期任务条件保障建设及相关研究工作提供参考。     

月球车车轮与模拟月壤相互作用试验

设计搭建了深空探测车车轮牵引特性试验台,制备了轮土试验用模拟月壤,在土槽中进行了模拟月壤的整备,重塑了就位月壤的力学特性.对不同轮齿类型的刚性车轮进行了牵引特性试验,分析了轮下模拟月壤的剪切破坏和车轮行驶阻力的表现形式.结果表明:增大轮上载荷能够提高挂钩牵引力,车轮的牵引效率随着滑转率的增加呈现先增加后降低的趋势;随着轮齿高度的增加,挂钩牵引力会随之增大,车轮的最大牵引效率有所降低;随着轮齿数目的增加,挂钩牵引力会随之增大,车轮的牵引效率变化不大;车轮转速在数值较低的范围内变化时,对牵引性能的影响较小.     

中国探月工程

"嫦娥4号"于2019年1月3日成功实现人类航天器首次在月球背面软着陆,"玉兔2号"月球车率先在月背刻上了中国足迹。至今,国际月球探测活动共实施126次,期间出现两个探月高潮。20世纪50—70年代,美苏两个航天大国之间的竞争引起第一轮探月高潮。20世纪末至今,各航天国家意识到月球探测的战略意义,纷纷提出月球探测计划并积极实施,月球成为各国争先探测的热点,掀起第二轮探月热潮。中国自2004年首次绕月探测工程立项实施以来,共开展了"嫦娥1号""嫦娥2号""嫦娥3号""嫦娥4号"及再入返回飞行试验共5次月球探测任务,实现"五战五捷",在空间技术、空间科学与应用、国际合作等方面取得了非凡成就,积累了丰富的经验,后续将继续开展以无人月球科研站为主的月球探测活动。     

一种低能量远焦距电子枪技术

针对可移动非接触式月球表面电位探测器的电位无扰动测量单元对低能远焦电子束的需求，设计了低能远焦电子枪。以平板二极管电子枪为电子源，匹配两个静电聚焦透镜，将电子源引出的发散电子束聚焦为需要的形状，并加速至所需能量。优化电子枪的几何参数以及施加在电极上的电位，电子枪引出的电子束能量在5～500 eV内，并且具有良好的电子光路特性。电子束能量为5 eV时，初始半径r为5 mm，束腰至电子枪出口的距离p约为133 mm。随着能量增加，r逐渐减小至500 eV时的3 mm左右，p逐渐减小至105 mm。电子束经月球表面电场反射被电子收集平极接收，仿真数据和理论分析结果均表明，电子枪的工作距离为400～600 mm，平板接收的电子占发射电子比例在96%以上。电子枪结构质量仅408 g，满足探测器对电子枪的质量需求。     

模拟月壤研制的初步设想

模拟月壤是月球样品的地球化学复制品，作者总结世界上已有的5种模拟月壤JSC-1，MLS．1，MLS-2，MKS-1和FJS-1的研制过程、方法与基本理化性质，认为系列化模拟月壤研制对中国首次月球探测有重要意义，在此基础上，作者提出系列化模拟月壤研制的基本思路．     

Lunar gravity field modeling critical analysis and challenges

This paper summarizes and provides a critical analysis of the historical developments of lunar gravitational models from the earliest use of ground based tracking systems of the Lunar Orbiter to the Lunar Prospector mission. This encompasses a comprehensive and critical analysis of the various methods used in the estimation of the gravity coefficients and the processing of large batches of diverse measurements and data types. It has been shown that weakness exists in the current models of the lunar gravity field, which is primarily due to the lack of far side lunar tracking data information, which makes the lunar potential modeling difficult but expected to be overcome as data from SELENE satellite-to-satellite tracking becomes available. Comparisons of various lunar models reveal an agreement in the low order coefficients of the spherical harmonics. However, substantial differences in the models exist in the higher-order harmonics. A numerical comparison has been presented showing the performance of all the contemporary lunar gravitational models used within the astrodynamics community and available in public domain. Improvements to the current models are part of a continuing process and the recent model improvements and future possibilities in lunar gravity modeling are discussed. A brief review of the recent missions has been presented. It is hoped that this critical review will benefit the researchers by presenting the historical as well as state of the art in this field.