Orbit determination of BDS-3 satellite based on regional ground tracking station and inter-satellite link observations

The BeiDou global navigation satellite system (BDS-3) has established the Ka-band inter-satellite link (ISL) to realize a two-way ranging function between satellites, which provides a new observation technology for the orbit determination of BDS-3 satellites. Therefore, this study presents a BDS satellite orbit determination model based on ground tracking station (GTS) observations and ISL ranging observations firstly to analyze the impact of the ISL ranging observations on the orbit determination of BDS-3 satellites. Subsequently, considering the data fusion processing, the variance component estimation (VCE) algorithm is applied to the parameter estimation process of the satellite orbit determination. Finally, using the measured data from China’s regional GTS observations and BDS-3 ISL ranging observations, the effects of ISL ranging observations on the orbit determination accuracy of BDS-3 satellites are analyzed. Moreover, the impact of the VCE algorithm on the fusion data processing is evaluated from the aspects of orbit determination accuracy, Ka-band hardware delay parameter stability, and ISL ranging observation residuals. The results show that for China’s regional GTSs, the addition of BDS-3 ISL ranging observations can significantly improve the orbit determination accuracy of BDS-3 satellites. The observed orbit determination accuracy of satellite radial component is improved from 48 cm to 4.1 cm. In addition, when the initial weight ratio between GTS observations and ISL ranging observations is not appropriate, the various indicators which include orbit determination accuracy, ISL hardware delay, and ISL observation residuals were observed to have improved after the adjustment of the VCE algorithm. These results validate the effectiveness of the VCE algorithm for the fusion data processing of the GTS observations and ISL ranging observations.     

Analysis of BDS-3 distributed autonomous navigation based on BeiDou system simulation platform

Satellite autonomous navigation is an important function of the BeiDou-3 navigation System (BDS-3). Satellite autonomous navigation means that the navigation satellite uses long-term forecast ephemeris and Inter-Satellite Link (ISL) measurements to determinate its own spatial position and time reference without the support of the ground Operation and Control System (OCS) for a long time to ensure that the navigation system can normally maintain the time and space reference. This paper aims to analyze the feasibility of distributed autonomous navigation algorithms. For the first time, a ground parallel autonomous navigation test system (GPANTS) is built. The performance of distributed autonomous navigation is then analyzed using the two-way ISL ranging of BDS-3 satellites. First, the BDS simulation platform and the GPANTS are introduced. Then, the basic principles of distributed satellite autonomous orbit determination and time synchronization based on ISL measurements are summarized. Preliminary evaluation of the performance of the BDS-3 constellation autonomous navigation service under ideal conditions through simulation data. Then the performance of autonomous navigation for 22 BeiDou-3 satellites using ISL measurements is evaluated. The results show that when satellites operate autonomously for 50 days without the support of any ground station, the User Range Error (URE) of autonomous orbit determination is better than 3 m, and the time synchronization accuracy is better than 4 ns.     

Achievable debris orbit prediction accuracy using laser ranging data from a single station

Earlier studies have shown that an orbit prediction accuracy of 20 arc sec ground station pointing error for 1–2 day predictions was achievable for low Earth orbit (LEO) debris using two passes of debris laser ranging (DLR) data from a single station, separated by about 24 h. The accuracy was determined by comparing the predicted orbits with subsequent tracking data from the same station. This accuracy statement might be over-optimistic for other parts of orbit far away from the station. This paper presents the achievable orbit prediction accuracy using satellite laser ranging (SLR) data of Starlette and Larets under a similar data scenario as that of DLR. The SLR data is corrupted with random errors of 1 m standard deviation so that its accuracy is similar to that of DLR data. The accurate ILRS Consolidated Prediction Format orbits are used as reference to compute the orbit prediction errors. The study demonstrates that accuracy of 20 arc sec for 1–2 day predictions is achievable.     

卫星初始轨道确定方法研究

卫星精密轨道确定过程实际上是通过求解轨道动力学微分方程组而对初始轨道不断改进的过程,因此,轨道确定的精度与速度不但依赖于求解微分方程组的具体算法,同样依赖于初始轨道的精度与准确性。针对多站测距/距离和数据,建立了一种轨道初值计算的几何方法,该方法集折射误差修正方法于一体,在进行观测数据折射误差修正的基础上,可以得到卫星在任意时刻的轨道初值。     

A genetic algorithm for Initial Orbit Determination from a too short arc optical observation

Optical observations constitute a source of angular measurements of a satellite pass. Commonly, these observations have short durations with respect to the satellite orbit period. As a consequence, the use of classical orbit determination algorithms, as Laplace, Gauss or Escobal methods, give very poor results. The present work faces with the problem of estimating the orbital parameters of an orbiting object using its optical streak acquired by a telescope or a high accuracy camera. In the paper a new technique is developed for the Initial Orbit Determination from optical data by exploiting the genetic algorithms. The algorithm works without restrictions on the observer location. A recent challenging problem is the Initial Orbit Determination with space-based observations. This work focuses on the problem of determinating the orbital parameters of a satellite from an orbiting observer in LEO, using short time observations. We present the results based on a simulation with the observer on a sun-synchronous orbit with a single observation of just 60 s. Monte Carlo simulations are presented with different levels of sensor accuracy to show the reliability of the algorithm. The algorithm is able to yield a candidate solution for each observation. The coplanar case is analyzed and discussed as well.     

双站跟踪模式下“嫦娥4号”中继星定轨仿真分析

位于地月平动点的探测器因为较差的观测几何,需要地基USB/UXB与天文VLBI长时间的联合跟踪数据获取稳定精确的轨道。提出了利用中国深空网双站共视跟踪平动点探测器,获取双程、三程测距及VLBI测量数据,解算探测器精确轨道的模式。以"鹊桥"卫星为分析对象,首先评估中国深空网对"鹊桥"的跟踪能力。然后分析不同观测组合模式下的定轨计算精度。结果表明:双站共视约束下,深空站每天对"鹊桥"跟踪弧长大于5 h;使用长于6 h的双站跟踪数据进行定轨,系统差的解算更有利于轨道精度提升;跟踪时长超过2天时,必须在轨道解算的同时估计光压系数,并有望实现优于百米的轨道精度。     

基于单频星载GPS数据的低轨卫星精密定轨

为满足搭载单频GPS接收机低轨卫星的精密定轨需求以及深化单频定轨研究,文中解决了单频星载GPS数据的周跳探测问题,并利用“海洋二号”（HY-2A）卫星及“资源三号”（ZY-3）卫星的单频星载GPS实测数据采用两种方法确定了二者的简化动力学轨道,并通过观测值残差分析、与双频精密轨道比较、激光测卫数据检核等方法对所得轨道精度进行评定。结果表明,在不考虑电离层延迟影响的情况下,HY-2A卫星定轨精度为2~3dm,ZY-3卫星为1m左右;而采用半和改正组合消除电离层延迟一阶项影响后,二者定轨精度均显著提高,HY-2A卫星三维精度提高至1dm左右,ZY-3卫星提高至1~2dm。文章的研究成果表明,搭载单频GPS接收机的低轨卫星也可获得厘米级的定轨精度。     

基于扩展卡尔曼滤波的XPNAV-1卫星自主定轨算法研究

X射线脉冲星导航1号（XPNAV-1）是全球首颗脉冲星导航专用试验卫星。利用该卫星观测的单颗脉冲星数据，采用几何约束方法，能够有效抑制轨道误差增长，但存在长时间定轨发散问题。针对XPNAV-1卫星拓展试验任务及脉冲星导航后续发展需求，利用多颗脉冲星的观测数据，研究基于扩展卡尔曼滤波（EKF）的卫星自主定轨算法。首先，建立该卫星的轨道力学模型和观测方程；然后，详细论述EKF滤波算法和分段式定常系统（PWCS）的可观测性分析方法；最后，通过综合分析XPNAV-1卫星的观测数据、脉冲星对该卫星轨道的覆盖性以及系统状态的可观测性，进行自主定轨算法试验。试验结果表明，基于EKF的自主定轨算法滤波过程收敛，验证了该算法的合理性和有效性。     

利用TLE数据分析LEO卫星轨道异常的新方法——————综合判据法

及时准确地发现在轨卫星的轨道异常意义重大. 通过有效的异常算法, 能够找出发生轨道异常的碎片或航天器, 为空间碎片碰撞预警系统分析和验证碰撞事件提供数据支持. 通过对利用TLE (Two Line Elements)数据分析LEO在轨卫星轨道异常的方法研究, 提出了一个利用单个卫星相邻根数时间差控制加综合判据的判别方法. 分析表明, 相对于取单一因素阈值的判别方法, 综合判据法能够最大限度地减少漏判, 并且保持相对较高的判断准确率.      

联合北斗导航与星间链路的大椭圆卫星定轨方法

传统的地面测控和GNSS均无法实现HEO卫星全弧段的跟踪观测.在分析北斗导航信号及其星间链路信号对典型HEO的观测几何及覆盖特性的基础上,利用北斗导航及其星间链路对HEO测控支持形成互补的特点,提出了一种卫星导航与星间链路相结合的自主导航方法.对HEO定轨进行分段划分并基于EKF设计了卫星导航与星间链路数据融合定轨的自主导航算法.分析结果表明,本文提出的方法能够从全弧段上改善HEO的观测几何,定轨精度比仅使用卫星导航提高了2个数量级,并且仅需较少的星间链路资源.      

基于机动力模型的GEO卫星恢复期间定轨

北斗卫星导航系统(BDS)中GEO卫星频繁的轨道机动对高精度、实时不间断的导 航服务需求提出了更高要求, 如何在短弧跟踪条件下提高GEO卫星轨道快速 恢复能力, 是提升导航系统服务精度的关键因素. 针对该问题, 本文提出了基 于机动力模型的动力学定轨方法, 尝试利用高精度的C波段转发式测距数据, 辅 以机动期间的遥测遥控信息建立机动力模型, 联合轨控前后的观测数据进行动 力学长弧定轨. 利用BDS中GEO卫星实测数据进行了定轨试验与分析, 结果表明, 恢复期间需要采用解算机动推力的定轨方法, 联合机动前、机动期间和机 动后4h数据定轨的轨道位置精度在20m量级, 径向精度优于2.5m. 该方 法克服了短弧跟踪条件下动力学法定轨和单点定位中的诸多问题, 提供了解决 GEO卫星机动后轨道快速恢复问题的技术方法.      

Precision orbit determination for TOPEX/Poseidon using TDRSS doppler tracking data

Precision orbit determination on the TOPEX/Poseidon (T/P) altimeter satellite is now being routinely achieved with sub-5cm radial and sub-15 cm total positioning accuracy using state-of-the-art modeling with precision tracking provided by a combination of: (a) global Satellite Laser Ranging (SLR) and Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS), or (b) the Global Positioning System (GPS) Constellation which provides pseudo-range and carrier phase observations. The geostationary Tracking and Data Relay Satellite System (TDRSS) satellites are providing the operational tracking and communication support for this mission. The TDRSS Doppler data are of high precision (0.3 mm/s nominal noise levels). Unlike other satellite missions supported operationally by TDRSS, T/P has high quality independent tracking which enables absolute orbit accuracy assessments. In addition, the T/P satellite provides extensive geometry for positioning a satellite at geostationary altitude, and thus the TDRSS-T/P data provides an excellent means for determining the TDRS orbits. Arc lengths of 7 and 10 days with varying degrees of T/P spacecraft attitude complexity are studied. Sub-meter T/P total positioning error is achieved when using the TDRSS range-rate data, with radial orbit errors of 10.6 cm and 15.5 cm RMS for the two arcs studied. Current limitations in the TDRSS precision orbit determination capability include mismodeling of numerous TDRSS satellite-specific dynamic and electronic effects, and in the inadequate treatment of the propagation delay and bending arising from the wet troposphere and ionosphere.     

基于GPS的地球资源卫星精密星历外推新方法

随着技术的发展,通过星载GPS接收机直接确定卫星星历成为卫星定位的一个重要手段.GPS接收机获取的卫星星历数据是某一时刻的瞬时状态,要获取连续的卫星星历数据还需要进一步处理.常用的处理方法有几何法与动力学法.在GPS接收机给定瞬时星历频率较低的情况下,几何法的计算误差比较大,特别是只有一组瞬时星历时,无法用几何法进行轨道的外推.在分析地球资源卫星轨道特点的基础上,提出一种新的轨道缩减动力模型,该模型将卫星运动在直角坐标系中分解为简谐运动,利用模型实现了轨道外推的算法.通过试验验证,该算法可以达到较高的精度.      

基于多项式近似的空间碎片群体轨道预报算法

快速准确地分析空间碎片群轨道演化行为对于其他在轨航天器碰撞规避至关重要。在各摄动力的作用下,空间碎片群演化运动呈现出复杂的非线性特征。空间碎片群体个体数量巨大,如果通过对空间碎片群中每个空间碎片进行轨道积分来分析群体预报的方法会导致计算量过大。针对该问题,提出一种基于多项式近似的轨道快速预报分析方法。该方法将空间碎片群分为少量的标称碎片和其他大量关联碎片。针对标称碎片的轨道预报采用数值积分求解保证预报精度;而针对其他大量的关联碎片轨道预报问题,采用多项式泰勒展开半解析方法求解,从而在保证预报精度的前提下有效减少空间碎片群轨道预报的计算量。为了验证方法的有效性,对不同空间碎片群进行了轨道预报仿真。仿真结果表明,当轨道预报精度设定在1m范围内时,多项式近似算法的计算量较蒙特卡洛方法计算效率提高了2.2~17.2倍,验证了所提出方法的有效性。     

北斗卫星导航系统实时定轨与钟差处理策略

目前鲜有对北斗卫星导航系统（BeiDouNavigationSatelliteSystem,BDS）实时精密定轨与钟差确定的研究,文章提出了BDS实时轨道与实时钟差处理策略,包括了观测与动力学模型、实时轨道与实时钟差处理流程与评估方法。尤其对于实时钟差,为了提高计算效率,联合使用两个独立并行的线程估计非差绝对钟差和历元间相对钟差。利用多模全球卫星导航系统试验(MGEX)与全球连续检测评估系统（iGMAS）实测数据进行了北斗实时轨道与钟差解算,BDS实时轨道径向平均精度对于GEO卫星优于20cm,对于IGSO与MEO一般优于10cm;钟差精度对于GEO卫星为0.5~4.5ns,对于IGSO／MEO为0.2~2.0ns。基于目前的轨道与钟差结果,实时精密单点定位（PrecisePointPositioning,PPP）结果可以达到分米量级。     

Horizontal and vertical thermospheric cross-wind from GOCE linear and angular accelerations

Thermospheric wind measurements obtained from linear non-gravitational accelerations of the Gravity field and steady-state Ocean Circulation Explorer (GOCE) satellite show discrepancies when compared to ground-based measurements. In this paper the cross-wind is derived from both the linear and the angular accelerations using a newly developed iterative algorithm. The two resulting data sets are compared to test the validity of wind derived from angular accelerations and quantify the uncertainty in accelerometer-derived wind data. In general the difference is found to be less than 50?m/s vertically after high-pass filtering, and 100?m/s horizontally. A sensitivity analysis reveals that continuous thrusting is a major source of uncertainty in the torque-derived wind, as are the magnetic properties of the satellite. The energy accommodation coefficient is identified as a particularly promising parameter for improving the consistency of thermospheric cross-wind data sets in the future. The algorithm may be applied to obtain density and cross-wind from other satellite missions that lack accelerometer data, provided the attitude and orbit are known with sufficient accuracy.     

Simulation of long-term rotational dynamics of large space debris: A TOPEX/Poseidon case study

Accurate knowledge of the rotational dynamics of a large space debris is crucial for space situational awareness (SSA), whether it be for accurate orbital predictions needed for satellite conjunction analyses or for the success of an eventual active debris removal mission charged with stabilization, capture and removal of debris from orbit. In this light, the attitude dynamics of an inoperative satellite of great interest to the space debris community, the joint French and American spacecraft TOPEX/Poseidon, is explored. A comparison of simulation results with observations obtained from high-frequency satellite range measurements is made, showing that the spacecraft is currently spinning about its minor principal axis in a stable manner. Predictions of the evolution of its attitude motion to 2030 are presented, emphasizing the uncertainty on those estimates due to internal energy dissipation, which could cause a change of its spin state in the future. The effect of solar radiation pressure and the eddy-current torque are investigated in detail, and insights into some of the satellite’s missing properties are provided. These results are obtained using a novel, open-source, coupled orbit-attitude propagation software, the Debris SPin/Orbit Simulation Environment (D-SPOSE), whose primary goal is the study of the long-term evolution of the attitude dynamics of large space debris.     

基于磁强计的卫星姿态确定地面试验

阐述基于磁强计进行卫星姿态确定的原理,以某卫星的遥测数据为基础,进行姿态确定的地面试验,试验结果表明该方案可以达到较高的姿态确定精度,具有很强的实用性.     

LEO空间碎片甚短弧角度数据初轨确定方法对比

光学观测是空间目标观测中最常见的一种观测方式。采用扫描模式工作时光学观测得到的观测弧段弧长通常很短,有时甚至不到被观测空间目标运行周期的1%,这样的角度数据被称为甚短弧角度数据。基于近圆LEO空间碎片地基实测场景,研究比较仅利用角度数据进行初始轨道确定常用方法的性能差异,分析观测弧长对不同初轨确定算法的定轨成功率和误差的影响,为初轨确定工作提供参考。对比分析了常用的几种方法,包括Laplace方法、Gauss方法、Gooding方法和近几年提出的距离搜索算法等。大规模实测数据处理结果显示,距离搜索算法的成功率高于90%,初轨半长轴统计误差仅为25 km。初轨结果表明,距离搜索算法定轨成功率高于其他算法。研究成果可为解决空间碎片初轨确定问题提供参考。      

零偏模式下太阳光压对轨迹保持控制影响分析

从某颗在轨卫星地面轨迹漂移“异常”出发,分析了该现象发生的内在机理,建立了零偏模式下（卫星姿态偏航角保持为零）光压摄动力沿迹方向累积效应解析模型,并基于历史观测数据通过轨道改进估计模型参数。最后,利用该卫星2018年真实地面轨迹对新模型预报精度进行验证。结果表明,采用新模型后,卫星地面轨迹漂移预报误差得到明显改善,为该卫星轨迹保持控制策略制定提供了技术支持。