Modeling urban heat islands in heterogeneous land surface and its correlation with impervious surface area by using night-time ASTER satellite data in highly urbanizing city,Delhi-India

The present study is an assessment and identification of urban heat island (UHI) in the environment of one of the fastest urbanizing city of India, Delhi Metropolis, employing satellite image of ASTER and Landsat 7 ETM+ in the thermal infrared region 3–14 μm. Temporal (2001 and 2005) ASTER datasets were used to analyze the spatial structure of the thermal urban environment subsequently urban heat island (UHI) in relation to the urban surface characteristics and land use/land cover (LULC). The study involves derivation of parameters governing the surface heat fluxes, constructing statistics of ASTER thermal infrared images along with validation through intensive in situ measurements. The average images reveal spatial and temporal variations of land surface temperature (LST) of night-time and distinct microclimatic patterns. Central Business District (CBD) of Delhi, (Connaught Place, a high density built up area), and commercial/industrial areas display heat islands condition with a temperature greater than 4 °C compared to the suburbs. The small increase in surface temperature at city level is mainly attributed to cumulative impact of human activities, changes in LULC pattern and vegetation density. In this study the methodology takes into account spatially-relative surface temperatures and impervious surface fraction value to measure surface UHI intensity between the urban land cover and rural surroundings. Both the spatial and temporal variation in surface temperature associated with impervious surface area (ISA) has been evaluated to assess the effect of urbanization on the local climate.     

Land use/land cover classification using time series Landsat 8 images in a heavily urbanized area

It is of great significance to timely, accurately, and effectively monitor land use/cover in city regions for the reasonable development and utilization of urban land resources. The remotely sensed dynamic monitoring of Land use/land cover (LULC) in rapidly developing city regions has increasingly depended on remote-sensing data at high temporal and spatial resolutions. However, due to the influence of revisiting periods and weather, it is difficult to acquire enough time-series images with high quality at both high temporal and spatial resolution from the same sensor. In this paper we used the temporal-spatial fusion model ESTARFM (Enhanced Spatial and Temporal Adaptive Reflectance Fusion Model) to blend Landsat8 and MODIS data and obtain time-series Landsat8 images. Then, land cover information is extracted using an object-based classification method. In this study, the proposed method is validated by a case study of the Changsha City. The results show that the overall accuracy and Kappa coefficient were 94.38% and 0.88, respectively, and the user/producer accuracies of vegetation types were all over 85%. Our approach provides an accurate and efficient technical method for the effective extraction of land use/cover information in the highly heterogeneous regions.     

Selection of classification techniques for land use/land cover change investigation

The concerns over land use/land cover (LULC) change have emerged on the global stage due to the realisation that changes occurring on the land surface also influence climate, ecosystem and its services. As a result, the importance of accurate mapping of LULC and its changes over time is on the increase. Landsat satellite is a major data source for regional to global LULC analysis. The main objective of this study focuses on the comparison of three classification tools for Landsat images, which are maximum likelihood classification (MLC), support vector machine and artificial neural network (ANN), in order to select the best method among them. The classifiers algorithms are well optimized for the gamma, penalty, degree of polynomial in case of SVM, while for ANN minimum output activation threshold and RMSE are taken into account. The overall analysis shows that the ANN is superior to the kernel based SVM (linear, radial based, sigmoid and polynomial) and MLC. The best tool (ANN) is then applied on detecting the LULC change over part of Walnut Creek, Iowa. The change analysis of the multi temporal images indicates an increase in urban areas and a major shift in the agricultural practices.     

A generalised methodology for estimating land surface temperature for non-urban areas of Greece through the combined use of NOAA–AVHRR data and ancillary information

The purpose of this study was twofold: to develop a methodology for the estimation of land surface temperature for non-urban areas and to analyze the sensitivity of the methodology. The key element of the methodology was the development of emissivity maps based on CORINE Land Cover and the ASTER spectral library. Land surface temperatures were derived from NOAA/AVHRR data and the methodology was applied at a national scale in Greece, with emphasis given to non-urban areas. A sensitivity analysis was performed in order to determine the variables that mainly affect the estimation of land surface temperature. A varying propagation error was identified depending on the temperature and humidity of the atmosphere, as well as the land cover type. The methodology was applied to a series of 25 AVHRR images and the results were compared to in-situ measurements from representative stations.     

Surface temperature estimation in Singhbhum Shear Zone of India using Landsat-7 ETM+ thermal infrared data

Land surface temperature (LST) is an important factor in global change studies, heat balance and as control for climate change. A comparative study of LST over parts of the Singhbhum Shear Zone in India was undertaken using various emissivity and temperature retrieval algorithms applied on visible and near infrared (VNIR), and thermal infrared (TIR) bands of high resolution Landsat-7 ETM+ imagery. LST results obtained from satellite data of October 26, 2001 and November 2, 2001 through various algorithms were validated with ground measurements collected during satellite overpass. In addition, LST products of MODIS and ASTER were compared with Landsat-7 ETM+ and ground truth data to explore the possibility of using multi-sensor approach in LST monitoring. An image-based dark object subtraction (DOS3) algorithm, which is yet to be tested for LST retrieval, was applied on VNIR bands to obtain atmospheric corrected surface reflectance images. Normalized difference vegetation index (NDVI) was estimated from VNIR reflectance image. Various surface emissivity retrieval algorithms based on NDVI and vegetation proportion were applied to ascertain emissivities of the various land cover categories in the study area in the spectral range of 10.4–12.5 μm. A minimum emissivity value of about 0.95 was observed over the reflective rock body with a maximum of about 0.99 over dense forest. A strong correlation was established between Landsat ETM+ reflectance band 3 and emissivity. Single channel based algorithms were adopted for surface radiance and brightness temperature. Finally, emissivity correction was applied on ‘brightness temperature’ to obtain LST. Estimated LST values obtained from various algorithms were compared with field ground measurements for different land cover categories. LST values obtained after using Valor’s emissivity and single channel equations were best correlated with ground truth temperature. Minimum LST is observed over dense forest as about 26 °C and maximum LST is observed over rock body of about 38 °C. The estimated LST showed that rock bodies, bare soils and built-up areas exhibit higher surface temperatures, while water bodies, agricultural croplands and dense vegetations have lower surface temperatures during the daytime. The accuracy of the estimated LST was within ±2 °C. LST comparison of ASTER and MODIS with Landsat has a maximum difference of 2 °C. Strong correlation was found between LST and spectral radiance of band 6 of Landsat-7 ETM+. Result corroborates the fact that surface temperatures over land use/land cover types are greatly influenced by the amount of vegetation present.     

Substitution of satellite-based land surface temperature defective data using GSP method

Land surface temperature (LST) as an important environmental variable provides valuable information for earth environmental system modelling. Currently, LST is obtained through satellite thermal sensors at various spatial and temporal resolutions. Although spatially continuous satellite-based LST measurements are intended to overcome the shortcomings of sparse ground-based LST measurements, LST images often contain anomalous values due to the existence of clouds or sensor malfunctioning. The problem becomes more serious where the users deal with high spatial resolution characterized by low temporal resolution. This study examines the capability of a newly developed graph signal processing (GSP) method using two-dimensional single-date thermal data. For this purpose, four Landsat/TIRS datasets are analyzed. The data of five elliptical regions on thermal images are eliminated and then reconstructed through the GSP method and using the LST values of the enclosing rectangles containing the ellipsoids. The results indicate that the temperature variation determined by the GSP method generally conforms to the original image LST values. According to a correlation test conducted on the original image LST and those obtained through the GSP method, the values vary from 58% to 95%, which is an above-the-average rate (RMSE from 0.69 to 2.27). The statistical analysis of the original image LST in both the elliptical regions and the enclosing rectangles containing the ellipsoids indicates that an increase in the variance of LST data causes an increased error in the calculation of temperature by the GSP method, and vice versa. The results of the analysis of variance (ANOVA) and Duncan test indicated that an increase in the number of the non-zero spectral bins would result in increased RMSE values for all the dates and the regions. Moreover, the model errors were significant at the 0.05 level across all the image date and five elliptical study regions. Based on the results, the use of this method is recommended for the reconstruction of LST missing values, where dissimilarity of atmospheric conditions limits the use of other methods that depend on the time series data of various dates and a great deal of data calculation.     

Development and testing of a statistical texture model for land cover classification of the Black Sea region with MODIS imagery

A statistical model is proposed for analysis of the texture of land cover types for global and regional land cover classification by using texture features extracted by multiresolution image analysis techniques. It consists of four novel indices representing second-order texture, which are calculated after wavelet decomposition of an image and after texture extraction by a new approach that makes use of a four-pixel texture unit. The model was applied to four satellite images of the Black Sea region, obtained by Terra/MODIS and Aqua/MODIS at different spatial resolution. In single texture classification experiments, we used 15 subimages (50 × 50 pixels) of the selected classes of land covers that are present in the satellite images studied. These subimages were subjected to one-level and two-level decompositions by using orthonormal spline and Gabor-like spline wavelets. The texture indices were calculated and used as feature vectors in the supervised classification system with neural networks. The testing of the model was based on the use of two kinds of widely accepted statistical texture quantities: five texture features determined by the co-occurrence matrix (angular second moment, contrast, correlation, inverse difference moment, entropy), and four statistical texture features determined after the wavelet transformation (mean, standard deviation, energy, entropy). The supervised neural network classification was performed and the discrimination ability of the proposed texture indices was found comparable with that for the sets of five GLCM texture features and four wavelet-based texture features. The results obtained from the neural network classifier showed that the proposed texture model yielded an accuracy of 92.86% on average after orthonormal wavelet decomposition and 100% after Gabor-like wavelet decomposition for texture classification of the examined land cover types on satellite images.     

Using land use change trajectories to quantify the effects of urbanization on urban heat island

This paper proposed a quantitative method of land use change trajectory, which means the succession among different land use types across time, to examine the effects of urbanization on an urban heat island (UHI). To accomplish this, multi-temporal images from Landsat 5 Thematic Mapper (TM) and Landsat 7 Enhanced Thematic Mapper Plus (ETM+) of Xiamen City in China from 1987 to 2007 were selected. First, the land use change trajectories were extracted based on the classified images from different years. Then the land surface temperatures (LST) were retrieved and the magnitudes of the UHI were evaluated using the UHI intensity (UHII) indicator. Finally, the indices of the contribution to UHI intensity (CUHII) were constructed and calculated to quantify the effects of each land use change trajectory on the UHI during urbanization. The results demonstrated that the land use change trajectories and CUHII are effective and useful in quantifying the effects of urbanization on UHI. In Xiamen City, a total of 2218 land use change trajectories were identified and 530 of them were the existing urban or urbanization trajectories. The UHII presents a trend of continuous increase from 0.83 °C in 1987 to 2.14 °C in 2007. With respect to the effects of urban growth on UHI, the contribution of existing urban area to UHI decreased during urbanization. Prior to 2007, the existing urban area of trajectory NO. 44444 had the most significant effect on UHI with the greatest CUHII, while the value has decreased from 55.00% in 1987 to 13.03% in 2007 because of the addition of new urbanized area. In 2007, the greatest CUHII was replaced by a trajectory from farmland to built-up area (NO. 22224) with the CUHII of 21.98%, followed by the existing urban area of trajectory NO. 44444 with the CUHII of 13.03%. These results provide not only a new methodology to assess the environmental effects of urbanization, but also decision-supports for the planning and management of cities.     

Remotely sensed thermal information applied to urban climate analysis

Urban heat island (UHI) effects on the ten most populated cities of Hungary, including the Budapest agglomeration area, were analyzed using remotely sensed data. Day- and night-time surface temperature time series observed by sensor MODIS on satellite Terra were used to determine UHI intensities. UHI intensity was defined as the difference in spatially averaged surface temperatures between urban and surrounding rural pixels. Spatial structures of UHIs were determined and compared for different seasons and macrocirculation conditions.     

Land use and cover change (LUCC) impacts on Earth’s eco-environments: Research progress and prospects

Land use and cover change (LUCC) is one of the key variables dominating land–atmosphere interactions and strongly affects the Earth’s eco-environments by altering surface properties. Numerous studies have been carried out to assess the impact of LUCC. However, the Earth is a large, open and complex system characterized by complex interactions between its eco-environments and drivers. This study aimed to summarize previous studies of the impact of LUCC on the Earth’s eco-environments and discuss the progress and limitations in suggesting future directions. Previous studies have confirmed that LUCC has a wide range of impacts on the Earth’s eco-environments, which are represented by the alternation of climate (temperature, precipitation, wind, and humidity), hydrology (soil moisture, runoff, and evapotranspiration), ecology and environmental (air, water, and soil) pollution. Physically, the impacts were mainly attributed to the disturbance of the surface radiation budget and matter conservation caused by LUCC. Although great achievements have been made, several challenges remain because of the unavoidable uncertainties in data sources and methodologies and the complexity of eco-environmental evolution. Therefore, data assimilation, physical-based investigations, contribution isolation, and full-process analysis are required to overcome these challenges in future research. The results of this study helped to capture the impact of LUCC and its physical mechanisms, which provide useful clues for future research and support the relative land use management for sustainable development.     

Simulation of the land surface temperature from moon-based Earth observations

The land surface temperature (LST) is a key parameter for the Earth’s energy balance. As a natural satellite of the Earth, the orbital of the moon differs from that of current Earth observation satellites. It is a new way to measure the land surface temperature from the moon and has many advantages compared with artificial satellites. In this paper, we present a new method for simulating the LST measured by moon-based Earth observations. Firstly, a modified land-surface diurnal temperature cycle (DTC) method is applied to obtain the global LST at the same coordinated universal time (UTC) using the Moderate Resolution Imaging Spectroradiometer (MODIS) LST products. The lunar elevation angles calculated using the ephemeris data (DE405) from the Jet Propulsion Laboratory (JPL) were then applied to simulate the Earth coverage observed from the moon. At the same time, the modified DTC model was validated using in situ data, MODIS LST products, and the FengYun-2F (FY-2F) LST, respectively. The results show that the fitting accuracy (root-mean-square error, RMSE) of the modified DTC model is not greater than 0.72?°C for eight in situ stations with different land cover types, and the maximum fitting RMSE of the modified model is smaller than that of current DTC models. By the comparison of the simulated LST with MODIS and FY-2F LST products, the errors of the results were feasible and accredited, and the simulated global LST has a reasonable spatiotemporal distribution and change trend. The simulated LST data can therefore be used as base datasets to simulate the thermal infrared imagery from moon-based Earth observations in future research.     

Comparison of ANN and MLR models for estimating solar radiation in Turkey using NOAA/AVHRR data

In this paper, the estimation capacities of MLR and ANN are investigated to estimate monthly-average daily SR over Turkey. The satellite data are used for 73 different locations over Turkey. Land surface temperature, altitude, latitude, longitude and month are offered as the input variables for modeling ANN and MLR to get SR. Estimations of SR are evaluated with the meteorological values by using the statistical bases. The obtained results indicated that the ANN model could achieve a satisfactory performance when compared to the MLR model. Moreover, it is understood that more accurate results in estimation of SR are obtained in the use of satellite data, rather than the use of meteorological station data. Finally, the built ANN model is used to estimate the yearly average of daily SR over Turkey. As a result, satellite-based SR map for Turkey is generated.     

TS-InSAR analysis for monitoring ground deformation in Lanzhou New District,the loess Plateau of China,from 2017 to 2019

Large-scale land creation projects involving the cutting of mountains to infill gullies for construction have been carried out in Lanzhou New District (LZND). However, there is an urgent need for comprehensive and detailed research on the spatiotemporal evolution of ground deformation in LZND. Based on Sentinel-1A SAR data, combined with the urban geological background, the ground deformation in LZND from 2017 to 2019 was analysed. Two independent, multi-temporal techniques, persistent scatterers interferometry (PS-InSAR) and the small baseline subset (SBAS-InSAR), were used to calculate the deformation time series, and the results were cross-verified. The time series-monitoring results of the SBAS and PS calculations exhibited strong consistency in LZND and verified the high reliability of the experimental results. The results showed the whole surface of the LZND from March 2017 to October 2019 maintained stability, and the deformation rate was primarily in the range of ?10 to 10 mm/year. However, ground deformation in the Xicha area was evident. The maximum annual deformation rates monitored by SBAS-InSAR and PS-InSAR were ?52.48 mm/year and ?56.35 mm/year, respectively. The most typical deformation areas include the built-up area and the land creation area. The surface subsidence area was concentrated in the filling area. The ground deformation range of LZND kept expanding and accelerating from 2017 to 2019. Land creation, urban construction, geology and precipitation were the primary factors contributing to local severe ground deformation. The results of this study provide reference for the regional urban planning in LZND.     

Comparison of ground reflectance measurement with satellite derived atmospherically corrected reflectance: A case study over semi-arid landscape

Atmospheric corrections to satellite data are important for comparing multitemporal data sets over tropical regions with variable aerosol loading. In this study, we evaluated the potential of 6S radiative transfer model for atmospheric corrections of IRS-P6 AWiFS satellite data sets, in a semi-arid landscape. Ground measurements of surface reflectance representing different land use/land cover categories were conducted to relate IRS-P6 AWiFS top of atmospheric reflectance. The 6S radiative transfer model was calibrated for local conditions using ground measurements for aerosol optical depth, water vapor and ozone with a sun photometer. Surface reflectance retrieved from 6S code was compared with top of atmosphere (TOA) reflectance and ground based spectroradiometer measurements. Accurate parameterization of the 6S model using measurements of aerosol optical depth, water vapor and ozone plays an important role while comparing ground and satellite derived reflectance measurements.     

Effects of concurrent snow and cloud cover on planetary albedo

The effects of snow and cloud cover on planetary albedo are examined using observations from NOAA polar orbiting satellites. Reflected radiation was measured in the visible range (0.5 – 0.7 μm). Planetary albedos resulting from different cloud/snow cover conditions are compared using Northern Hemisphere snow cover maps, surface weather charts, satellite photos and data on land surface types. None of the cases studied show that concurrent cloud and snow cover produces significantly different planetary albedos than cloud cover alone. Cloud cover alone is found to yield higher planetary albedos than snow cover alone; the difference being greatest over forested areas. With and without snow cover present, clear-sky planetary albedos over farming and grazing lands (snow(0.45), no snow(0.15)) are found to be significantly higher than those over forested regions (snow(0.33), no snow(0.11)). Variations in satellite zenith angle are not found to produce significant effects in most cases studied.     

Influence of land surface parameters on the spatio-seasonal land surface temperature regime in rural West Bengal,India

The magnitude and causes of changes in the land surface temperature of rural areas have not been extensively studied. The thermal band of Landsat imagery is taken to extract winter, summer, and monsoon season land surface temperature (LST) and relate it to surface parameters over a 30-year period. From the extracted parameters constructed a prospective surface temperature (PST) model using Multivariate Adaptive Regression Splines. The Chandrabhaga river basin in West Bengal of the lateritic Rarh Tract at the Chota Nagpur Plateau fringe was chosen as the study area because it is far from urban influences, to avoid the well-known heat island effect. Over the study period, summer and winter average LST increased linearly by 0.085?°C/y and 0.016?°C/y respectively. These results were validated with air temperature (RMSE?=?x and y, respectively). Over time more of the area is in the higher temperature zones, e.g., in April 2011, 4% area exceeded >32°, whereas in 2015 this proportion reached 52%. PST models of all the seasons were moderate to highly correlate (0.57–0.87) with actual LST, showing the value of this model. It also revealed the relative importance of the regional factors. Based on this information factor management is a scientific step to restrict or minimize the temperature rise effect.     

Experiment for mapping land cover and it’s change in southeastern Sri Lanka utilizing 250 m resolution MODIS imageries

Utilizing freely available MODIS NDVI and Natural color imageries of 250 m spatial resolution produced by NASA, an experiment was made to map land-cover and its change with an emphasis on vegetation cover in southeastern Sri Lanka, which plays a vital role for control of green house gas. For the change detection purpose, 1987 land cover map made by present authors from Landsat MSS image and extensive ground truth survey data was used as the base map. The result of the experiment shows that MODIS data are useful to make a land cover map of 250 m spatial resolution for tropical areas with high cloud coverage like Sri Lanka. It was found that the forest cover decrease amounted as large as 21% in 19 years time span in southeastern Sri Lanka, the prominent forest region of the country. On the other hand homestead/vegetation and mixed vegetation/scrub dominant categories increased by 13.7% and 7.1%, respectively. These changes are considered due to a large clearance of forest areas for agriculture and building houses to accommodate increasing inhabitants.     

Physical assessment of coastal vulnerability under enhanced land subsidence in Semarang,Indonesia, using multi-sensor satellite data

Research has been conducted in Semarang, Indonesia, to assess coastal vulnerability under enhanced land subsidence using multi-sensor satellite data, including the Advanced Land Observing Satellite (ALOS) Phased Array type L-band SAR (PALSAR), Landsat TM, IKONOS, and TOPEX/Poseidon. A coastal vulnerability index (CVI) was constructed to estimate the level of vulnerability of a coastline approximately 48.68?km in length using seven physical variables, namely, land subsidence, relative sea level change, coastal geomorphology, coastal slope, shoreline change, mean tidal range, and significant wave height. A comparison was also performed between a CVI calculated using seven parameters and a CVI using six parameters, the latter of which excludes the land subsidence parameter, to determine the effects of land subsidence during the coastal vulnerability assessment. This study showed that the accuracy of coastal vulnerability was increased 40% by adding the land subsidence factor (i.e., CVI 6 parameters?=?53%, CVI 7 parameters?=?93%). Moreover, Kappa coefficient indicated very good agreement (0.90) for CVI 7 parameters and fair agreement (0.3) for CVI 6 parameters. The results indicate that the area of very high vulnerability increased by 7% when land subsidence was added. Hence, using the CVI calculation including land subsidence parameters, the very high vulnerability area is determined to be 20% of the total coastline or 9.7?km of the total 48.7?km of coastline. This study proved that land subsidence has significant influence on coastal vulnerability in Semarang.     

Satellite monitoring of surface temperatures in semi-desert: Differences between anthropogenically impacted terrain and protected natural vegetation

The northern Sinai is a sandy semi-desert. Severe overgrazing and other anthropogenic pressures contribute to an extremely sparse vegetative cover. A 6×6 km area was fenced off in the summer of 1974, constituting an exclosure from the grazing herds and from harvesting of plants for firewood. The vegetation in this exclosure recovered rapidly. In this study, radiances and surface temperatures of the vegetated exclosure and of the surrounding anthropogenically impacted terrain were monitored for the period March–September 1981, using NOAA-6 satellite. This satellite carries the Advanced Very High Resolution Radiometer (AVHRR) that measures visible and solar infrared radiances and also radiation temperatures at 11 μm band. In the digital images, the exclosure forms an easily recognized square, darker in the visible and solar infrared AVHRR channels than the surroundings. We concentrated on the corner in which there was no anthropogenic activity. Based on the ratio of the radiance over the exclosure to that over the surrounding terrain, the protrusions parameter s (vertical projection of the protrusions per unit area) has been estimated. The average value of s for the various satellite passes is 0.20 as measured in the visible channel and 0.18 as measured in the solar infrared. The radiation temperatures of the exclosure and of the surrounding terrain were analyzed. The radiation temperatures of the vegetated exclosure (sand with protruding bushes) are higher (by up to 2.5°K) than those of the surrounding terrain (that can be approximately regarded as bare sand). It is concluded that in an arid climate, under the semi-dormant conditions of vegetation (which prevail at all times except for the desert-bloom period, after a rain) the evapotranspiration is low, so that its effect on the surface temperatures is very small. Under these conditions, the surface temperatures are controlled by the surface albedo and the air flow at the surface.