深空测控新技术研究进展

测控系统是航天工程不可或缺的重要组成部分,其导航通信能力在深空探测任务中尤为重要。深空探测任务远距离、长延迟、弱信号、易中断条件下高精度导航测量和高速可靠数据传输始终是深空测控技术需要重点解决的问题。围绕这些问题重点介绍了在天线组阵、再生伪码测距、连接端站干涉测量、相位参考干涉测量和容延迟网络等一系列新技术方面开展的研究工作和部分成果,可以看到,这些成果的应用将丰富深空测控技术手段,在未来更复杂、更遥远的深空探测任务中将会发挥重要作用。     

Theoretical modelling of X-ray fluorescence signals for different lunar compositions and dependence on solar activity

We present a forward modelling technique for calculating the surface X-ray spectra for a variety of lunar terrains. Our calculations considered variations in solar fluxes from solar quiescent condition to large flare activity (M1 flare), and expected elemental concentrations in the target, as well as yield, instrumental, and viewing geometry parameters for X-ray induced fluorescence from the lunar surface. Additionally, we present estimates of anticipated XRF signals from prominent K_α lines observable by a collimated 14 cm² X-ray detector from a 100 km lunar orbit with ∼20 km spatial resolution. Our results show that Mg, Al and Si characteristic K_α lines can be observed for all solar conditions. The Ca K_α lines line can be differentiated from a fixed background during more energetic solar conditions such as C1 and M1 flares, whereas Ti and Fe lines are identifiable only during C1 and M1 solar flare conditions for Apollo 12 site composition. Both the K_α X-ray intensity ratios of Mg/Si and Al/Si correlate well with concentration ratios of Mg/Si and Al/Si, respectively, for B1 and M1 solar conditions. The K_α X-ray intensity ratios of Fe/Si and Ca/Si correlates with concentration ratios of Fe/Si and Ca/Si, respectively, for M1 solar condition. In principle, the modelling technique outlined here can be used to determine absolute elemental abundances (Mg, Al, Si, Ca, Ti and Fe) from X-ray spectra measured during recent and future lunar missions.     

The fundamental physics explorer: An ESA technology reference study

ESA technology reference studies are used as a process to identify key technologies and technical challenges of potential future missions not yet in the science programme. This paper reports on the study of the Fundamental Physics Explorer (FPE), a re-usable platform targeted to small missions testing fundamental laws of physics in space. The study addresses three specific areas of interest: special and general relativity tests based on atomic clocks, experiments on the Weak Equivalence Principle (WEP), and studies of Bose–Einstein condensates under microgravity conditions. Starting from preliminary science objectives and payload requirements, three reference missions in the small/medium class range are discussed, based on a re-adaptation of the LISA Pathfinder spacecraft. A 700/3600 km elliptic orbit has been selected to conduct clock tests of special and general relativity, a 700 km circular orbit to perform experiments on the Weak Equivalence Principle and to study Bose–Einstein condensates, each mission being based on a three-axis stabilised spacecraft. It was determined that adaptation of LISA Pathfinder would be required in order to meet the demands of the FPE missions. Moreover it was established that specific payload and spacecraft technology development would be required to realise such a programme.     

Implementing new strategic plans for NASA long duration scientific balloons

Over that past twelve years, global long duration balloon (LDB) missions have provided scientists an observation platform that offers tremendous opportunity for accomplishing monumental science. The precedence of several years of highly successful LDB missions and the capability to recover and re-fly such instruments within a relatively short period of time has created even greater demands for serving science missions in 2004 and beyond. To address NASA’s strategic plans for more missions and longer durations, new concepts are being explored and some are currently being developed, in order to enhance the current LDB mission concept.     

How far is far enough? Requirements derivation for planetary mobility systems

The origination of duration and distance requirements on planetary mobility systems (generally, rovers) are reviewed in detail. It is found that a ‘clean’ flow down from scientific objectives to requirement to capability is rarely presented. Rather, the historical record shows that the capability of emerging designs has been adopted post-hoc as a requirement, simple comparative superiority to predecessor missions has been invoked in competitive situations, or the requirement has been driven by capability of other elements of a mission architecture, such as delivery precision or astronaut life support. These deviations from the idealized systems engineering process have nonetheless resulted in missions that have generally been considered highly successful.     

X-ray fluorescence spectrometrywith the SELENE orbiter

X-ray fluorescence spectrometry of the Moon using a CCD-based instrument “XRS” is planned with the SELENE (Selenological and Engineering Explorer) orbiter, which will be launched in 2003. In the Apollo 15 and 16 missions, elemental mapping of Mg, Al and Si has been performed at the lunar equatorial regions for only 9% of the total surface. Much improved datasets will be obtained by using the XRS to map most of major elements, for 90% coverage of the total surface, and within 20 km spatial resolution. Key scientific objectives are (a) to measure the global average of lunar surface composition for investigation of the overall properties of lunar crust, (b) to map the rock-type distribution to study the formation and evolution of the crust and the maria, and to speculate the origin of the dichotomy, (c) to survey the chemical pattern of lava flows, or bottoms of craters or basins, for surveying the vertical structure and composition of the lunar crust and mantle. We describe the XRS instrument.     

Miniaturized laser-induced plasma spectrometry for planetary in situ analysis – The case for Jupiter’s moon Europa

Jupiter’s icy moon Europa is one of most promising places in our Solar System where possible extraterrestrial life forms could exist either in the past or even presently. The Europa Lander mission, an exciting part of the international Europa Jupiter System Mission (EJSM/Laplace), considers in situ planetary exploration of the moon. The distance of Europa from the Earth and the Sun asks for autonomous analytical tools that maximize the scientific return at minimal resources, demanding new experimental concepts. We propose a novel instrument, based on the atomic spectroscopy of laser generated plasmas for the elemental analysis of Europa’s surface materials as far as it is in reach of the lander for example by a robotic arm or a mole, or just onboard the lander. The technique of laser-induced plasma spectrometry provides quantitative elemental analysis of all major and many trace elements. It is a fast technique, i.e. an analysis can be performed in a few seconds, which can be applied to many different types of material such as ice, dust or rocks and it does not require any sample preparation. The sensitivity is in the range of tens of ppm and high lateral resolution, down to 50 μm, is feasible. In addition, it provides the potential of depth profiling, up to 2 mm in rock material and up to a few cm in more transparent icy matrices. Key components of the instrument are presently developed in Germany for planetary in situ missions. This development program is accompanied by an in-depth methodical investigation of this technique under planetary environmental conditions.     

太阳高能粒子的电荷态和粒子强度间的相关性

本文发表了在太阳高能粒子事件中,元素氦、碳、氮、氧、氖、镁、硅、硫和铁的离子电荷态的分布。研究结果表明,除氦之外上述元素的电荷态分布的不同离子价的数目是随元素的质量而增大。核子能量在2—3MeV范围内,这些元素的平均粒子强度相对于碳的平均粒子强度之间的相关性能够用离子价的数目随元素质量的增加来解释,而不能用日冕温度确定的电荷态平衡模型来解释。且得出结论,太阳高能粒子的离子电荷是在太阳耀斑区而不是在星际激波区产生。      

Planetary protection issues for sample return missions.

Sample return missions from a comet nucleus and the Mars surface are currently under study in the US, USSR, and by ESA. Guidance on Planetary Protection (PP) issues is needed by mission scientists and engineers for incorporation into various elements of mission design studies. Although COSPAR has promulgated international policy on PP for various classes of solar system exploration missions, the applicability of this policy to sample return missions, in particular, remains vague. In this paper, we propose a set of implementing procedures to maintain the scientific integrity of these samples. We also propose that these same procedures will automatically assure that COSPAR-derived PP guidelines are achieved. The recommendations discussed here are the first step toward development of official COSPAR implementation requirements for sample return missions.     

航天测控网资源均衡分配的调度方法

研究了航天测控网资源集中管理、统一分配的工作模式,以及满足多星测控任务的测控网资源调度方法。提出了测控网均衡调度的方法。首先面向任务,将卫星测控任务按优先级划分,按最优分配的原则进行分配,使测控网能够支持的任务数量大;在此基础上,考虑测控站负荷和备份再进行优化,使测控网内各测控站的负荷均衡。相比其他方法,考虑了任务执行的成功概率,各测控站任务分配更均匀,便于测控网的管理。     

Silkworms culture as a source of protein for humans in space

This paper focuses on the problem about a configuration with complete nutrition for humans in a Controlled Ecological Life Support System (CELSS) applied in the spacebases. The possibility of feeding silkworms to provide edible animal protein with high quality for taikonauts during long-term spaceflights and lunar-based missions was investigated from several aspects, including the nutrition structure of silkworms, feeding method, processing methods, feeding equipment, growing conditions and the influences on the space environmental condition changes caused by the silkworms. The originally inedible silk is also regarded as a protein source. A possible process of edible silk protein was brought forward in this paper. After being processed, the silk can be converted to edible protein for humans. The conclusion provides a promising approach to solving the protein supply problem for the taikonauts living in space during an extended exploration period.     

Surface elements and landing strategies for small bodies missions – Philae and beyond

The investigation of small bodies, comets and asteroids, can contribute substantially to our understanding of the formation and history of the Solar System. In-situ observations by Landers play a prominent role in this field.The Rosetta Lander – Philae – is currently on its way to comet 67P/Churyumov–Gerasimenko. It will land in November 2014 and perform numerous experiments with a suite of 10 scientific instruments.Philae has been designed to cope with a wide range of possible comet properties. The considerations taken during its development are relevant for future Lander missions to small bodies in the Solar System.In addition the paper provides a review of alternative concepts, studied or developed for various missions like Phobos, Hayabusa/Minerva or Géocroiseur/Leonard.Various missions to small bodies in the Solar System, including Landers, are currently studied (e.g., Marco Polo). The paper will address the mission options and compare applicable technologies with the solutions chosen for Philae.     

CCSDS无损数据压缩算法的实现与应用研究

无损数据压缩是航天应用和遥感系统的重要业务之一。对CCSDS(空间数据系统咨询委员会)推荐的数据无损压缩标准进行了分析研究,讨论了其推荐算法的基本原理和编码方法,然后基于DSP(数字信号处理器)实现了该算法并对代码进行了优化。实验结果表明,DSP实现的CCSDS标准的无损数据压缩算法的数据处理速率可达11Mbit/s,可用于那些不需要很高数据吞吐率的星上数据处理任务。最后讨论了CCSDS无损数据压缩标准是如何融入CCSDS体制的星载数据系统中的。     

Materials trade study for lunar/gateway missions.

The National Aeronautics and Space Administration (NASA) administrator has identified protection from radiation hazards as one of the two biggest problems of the agency with respect to human deep space missions. The intensity and strength of cosmic radiation in deep space makes this a 'must solve' problem for space missions. The Moon and two Earth-Moon Lagrange points near Moon are being proposed as hubs for deep space missions. The focus of this study is to identify approaches to protecting astronauts and habitats from adverse effects from space radiation both for single missions and multiple missions for career astronauts to these destinations. As the great cost of added radiation shielding is a potential limiting factor in deep space missions, reduction of mass, without compromising safety, is of paramount importance. The choice of material and selection of the crew profile play major roles in design and mission operations. Material trade studies in shield design over multi-segmented missions involving multiple work and living areas in the transport and duty phase of space mission's to two Earth-Moon co-linear Lagrange points (L1) between Earth and the Moon and (L2) on back side of the moon as seen from Earth, and to the Moon have been studied. It is found that, for single missions, current state-of-the-art knowledge of material provides adequate shielding. On the other hand, the choice of shield material is absolutely critical for career astronauts and revolutionary materials need to be developed for these missions. This study also provides a guide to the effectiveness of multifunctional materials in preparation for more detailed geometry studies in progress.     

CELSS transportation analysis

Regenerative life support systems based on the use of biological material have been considered for inclusion in manned spacecraft since the early days of the United States space program. These biological life support systems are currently being developed by NASA in the Controlled Ecological Life Support System (CELSS) program. Because of the progress being achieved in the CELSS program, it is time to determine which space missions may profit from use of the developing technology. This paper presents the results of a study that was conducted to estimate where potential transportation cost savings could be anticipated by using CELSS technology for selected future manned space missions.

Six representative missions were selected for study from those included in NASA planning studies. The selected missions ranged from a low Earth orbit mission to those associated with asteroids and a Mars sortie. The crew sizes considered varied from four persons to five thousand. Other study parameters included mission duration and life support closure percentages, with the latter ranging from complete resupply of consumable life support materials to 97% closure of the life support system. The paper presents the analytical study approach and describes the missions and systems considered, together with the benefits derived from CELSS when applicable.     

Simulations of MATROSHKA experiment outside the ISS using PHITS

The radiation environment at the altitude of the International Space Station (ISS) is substantially different than anything typically encountered on Earth in both the character of the radiation field and the significantly higher dose rates. Concerns about the biological effects on humans of this highly complex natural radiation field are increasing due to higher amount of astronauts performing long-duration missions onboard the ISS and especially if looking into planned future manned missions to Mars. In order to begin the process of predicting the dose levels seen by the organs of an astronaut, being the prerequisite for radiation risk calculations, it is necessary to understand the character of the radiation environment both in- and outside of the ISS as well as the relevant contributions from the radiation field to the organ doses.     

Inverse free steering law for small satellite attitude control and power tracking with VSCMGs

Recent developments in integrated power and attitude control systems (IPACSs) for small satellite, has opened a new dimension to more complex and demanding space missions. This paper presents a new inverse free steering approach for integrated power and attitude control systems using variable-speed single gimbal control moment gyroscope. The proposed inverse free steering law computes the VSCMG steering commands (gimbal rates and wheel accelerations) such that error signal (difference in command and output) in feedback loop is driven to zero. H_∞ norm optimization approach is employed to synthesize the static matrix elements of steering law for a static state of VSCMG. Later these matrix elements are suitably made dynamic in order for the adaptation. In order to improve the performance of proposed steering law while passing through a singular state of CMG cluster (no torque output), the matrix element of steering law is suitably modified. Therefore, this steering law is capable of escaping internal singularities and using the full momentum capacity of CMG cluster. Finally, two numerical examples for a satellite in a low earth orbit are simulated to test the proposed steering law.     

Cosmic Ray Energetics And Mass for the International Space Station (ISS-CREAM)

The Cosmic Ray Energetics And Mass (CREAM) instrument is configured with a suite of particle detectors to measure TeV cosmic-ray elemental spectra from protons to iron nuclei over a wide energy range. The goal is to extend direct measurements of cosmic-ray composition to the highest energies practical, and thereby have enough overlap with ground based indirect measurements to answer questions on cosmic-ray origin, acceleration and propagation. The balloon-borne CREAM was flown successfully for about 161 days in six flights over Antarctica to measure elemental spectra of Z = 1–26 nuclei over the energy range 10¹⁰ to >10¹⁴ eV. Transforming the balloon instrument into ISS-CREAM involves identification and replacement of components that would be at risk in the International Space Station (ISS) environment, in addition to assessing safety and mission assurance concerns. The transformation process includes rigorous testing of components to reduce risks and increase survivability on the launch vehicle and operations on the ISS without negatively impacting the heritage of the successful CREAM design. The project status, including results from the ongoing analysis of existing data and, particularly, plans to increase the exposure factor by another order of magnitude utilizing the International Space Station are presented.