海杂波FRFT域分形特征在动目标检测中的应用

文中研究了海上动目标雷达回波与海杂波在分数阶Fourier域(FRFT域)的分形特性,利用两者幅值起伏程度的不同,提出了一种基于FRFT域分形维数差异的动目标检测方法。该方法以处处连续而不可导的非平稳不规则信号模型——分数布朗运动作为FRFT域分形模型,通过仿真分析实测海杂波数据的分形曲线,证明海杂波在FRFT域的无标度区间内具有分形特性。提取出FRFT域海杂波与动目标回波的分形维数,并利用其固有的差异进行目标检测。经不同极化方式下海杂波数据仿真,验证了算法的有效性。     

Novel radar target detection

Herein, a novel method of radar target detection based on 2-dimensional (2-D) fractal dimension is proposed. The proposed approach exploits both range information and azimuth information to estimate fractal dimension. Moreover, the approach can increase the number of data points. The above two merits result in the fractal dimension estimated by this method are more accurate and robust than the previous method. The detection performance is also better than the previous, which only makes use of 1-dimensional (1-D) information to estimate fractal dimension. Theoretical analysis and experimental results show that the proposed method performs well in a strong clutter background. The proposed method is also validated by real-life radar data, and the better result has been achieved.     

Radar target novel characteristic detection method

In this paper, a method of radar target detection based on 2-dimensional (2D) fractal dimension is proposed. The proposed approach exploits both range information and azimuth information to estimate fractal dimension. Moreover, the approach can increase the number of the data points. The above two merits result in the fractal dimension estimated by this method is more accurate and robust than the previous method. The detection performance is also better than the previous one, which only makes use of 1-dimensional (1-D) information to estimate fractal dimension. Theoretical analysis and experimental result show that the proposed method performs well in strong clutter background. The proposed method is also validated by real-life radar data, and the better result has been achieved.     

Coherent detection of radar targets in a non-gaussian background

The problem of detecting radar targets against a background of coherent, correlated, non-Gaussian clutter is studied with a two-step procedure. In the first step, the structure of the amplitude and the multivariate probability density functions (pdfs) describing the statistical properties of the clutter is derived. The starting point for this derivation is the basic scattering problem, and the statistics are obtained from an extension of the central limit theorem (CLT). This extension leads to modeling the clutter amplitude statistics by a mixture of Rayleigh distributions. The end product of the first step is a multidimensional pdf in the form of a Gaussian mixture, which is then used in step 2. The aim of step 2 is to derive both the optimal and a suboptimal detection structure for detecting radar targets in this type of clutter. Some performance results for the new detection processor are also given     

Analysis of CFAR performance in Weibull clutter

Recent interest has focused on order statistic-based (OS-based) algorithms for calculating radar detection thresholds. Previous analyses of these algorithms are extended, to determine closed-form approximations for the signal-to-clutter ratio required to achieve a particular probability of detection in clutter environments whose amplitude statistics are modeled by the Weibull distribution, and where the clutter dominates receiver noise. Performance is evaluated in both homogeneous and inhomogenous clutter. The analysis shows that the OS-based algorithm is quite robust against both interference and clutter edges. A method is suggested for improving performance at clutter inhomogeneities for short-range targets     

Matched subspace CFAR detection of hovering helicopters

A constant false alarm rate (CFAR) strategy for detecting a Gaussian distributed random signal against correlated non-Gaussian clutter is developed. The proposed algorithm is based on Scharf's matched subspace detector (MSD) and has the CFAR property with respect to the clutter amplitude probability density function (apdf), provided that the clutter distribution belongs to the compound-Gaussian family and the clutter covariance matrix is known to within a scale factor. Analytical expressions of false alarm and detection probabilities are derived. An application to the problem of detecting hovering helicopters against vegetated ground clutter is reported     

扫描模式航管监视雷达风电场杂波检测与抑制

近年来,全球风力发电装机容量呈指数增长。研究表明,风轮机对其附近的航管(ATC)监视雷达会产生严重影响。风轮机杂波的有效检测及抑制,对于保证空中交通安全具有重要意义。首先提出了基于回波谱宽特征的航管监视雷达的风轮机杂波检测方法。针对扫描模式下航管监视雷达频谱分辨率较低的问题,将基于自回归(AR)模型的超分辨率方法和质量中心的概念应用于雷达回波的快速谱宽和谱中心估计算法中,提高谱宽估计的精度。其次针对扫描模式下的风轮机回波数据不是一个完整周期数据的问题,基于缺省数据幅度和相位估计(GAPES)算法实现了扫描模式下风轮机雷达回波缺省数据的估计,而后利用风轮机杂波的周期性抑制风轮机杂波。该算法实现了风轮机杂波的有效检测和抑制,并且其不受限于风轮机与飞机目标在同一个距离单元的情况。仿真结果验证了所提方法的有效性。     

A Model for Generating Synthetic VHF SAR Forest Clutter Images

We propose a model for generating low-frequency synthetic aperture radar (SAR) clutter that relates model parameters to physical characteristics of the scene. The model includes both distributed scattering and large-amplitude discrete clutter responses. The model also incorporates the SAR imaging process, which introduces correlation among image pixels. The model may be used to generate synthetic clutter for a range of environmental operating conditions for use in target detection performance evaluation of the radar and automatic target detection/recognition algorithms. We derive a statistical representation of the proposed clutter model's pixel amplitudes and compare with measured data from the CARABAS-II SAR. Simulated clutter images capture the structure and amplitude responses seen in the measured data. A statistical analysis shows an order of magnitude improvement in model fit error compared with standard maximum-likelihood (ML) density fitting methods.     

Robust space-time adaptive processing for airborne radar in nonhomogeneous clutter environments

Space-time adaptive processing (STAP) holds tremendous potential for the new generation airborne surveillance radar, in which the phased array antennas and pulse Doppler processing mode are adopted. A new STAP approach using the multiple-beam and multiple Doppler channels is presented here for airborne phased array radar. The approach with space-time multiple-beam (STMB) architecture is robust to array errors and has very low system degrees of freedom (DOFs). Hence, it has low sample support requirement and it is very suitable for the practical planar phased array radar under nonhomogeneous clutter environments. Meanwhile, a new nonhomogeneous detector (NHD) based on the correlation dimension (CD) is also proposed here, which is used as an effective method to screen tracing data prior to detection processing. It can further improve the performance of the STAP approach in the severely nonhomogeneous clutter environments. Therefore, a scheme that incorporates the correlation dimension nonhomogeneity detector (CD-NHD) with the STMB is recommended, which we term CD-NHD-STMB. The experimental simulation results indicate that: 1) the STMB processor is robust to array element error and has high performance under nonhomogeneous clutter environments; 2) the CD-NHD is also effective on the nonhomogeneous clutter. As a result, the CD-NHD-STMB scheme is robust to array element error and nonhomogeneous clutter, and therefore available for airborne phased array radar applications.     

Studies of target detection algorithms that use polarimetric radardata

Algorithms are described which make use of polarimetric radar information in the detection and discrimination of targets in a ground clutter background. The optimal polarimetric detector (OPD) is derived. This algorithm processes the complete polarization scattering matrix (PSM) and provides the best possible detection performance from polarimetric radar data. Also derived is the best linear polarimetric detector, the polarimetric matched filter (PMF), and the structure of this detector is related to simple polarimetric target types. New polarimetric target and clutter models are described and used to predict the performance of the OPD and the PME. The performance of these algorithms is compared with that of simpler detectors that use only amplitude information to detect targets. The ability to discriminate between target types by exploring differences in polarimetric properties is discussed     

Generalized radar clutter model

A commonly used density model for radar clutter is chi-square for power, or, equivalently, Rayleigh for amplitude. However, for many modern high resolution radar systems, this density underestimates the tails of the measured clutter density. Log normal and Weibull distributions have proved to be better suited for the clutter in these high resolution radars. Generalizing the chi-square density by replacing it with the noncentral chi-square density and allowing the mean power level (the noncentrality parameter) to vary, we can both suitably shape the clutter density to produce larger tails and model the fluctuation of the average clutter power, commonly referred to as speckle. The resulting form, although appearing cumbersome, readily allows for efficient and accurate computations of the probability of detection in clutter     

Clutter Suppression by Complex Weighting of Coherent Pulse Trains

Uniform coherent pulse trains offer a practical solution to the problem of designing a radar signal possessing both high range and range-rate resolution. The Doppler sensitivity provides some rejection of off-Doppler (clutter) returns in the matched filter receiver. This paper considers the use of a processor in which members of the received pulse train are selectively weighted in amplitude and phase to improve clutter suppression. The techniques described are particularly suitable for rejecting interference entering the processor through ambiguous responses (range sidelobes) of the signal. The complex weights which are derived are optimum in the sense that they produce the maximum clutter suppression for a given detection efficiency. In determining these weights, it is assumed that the distribution of clutter in range and range rate relative to targets of interest is known. Thus, clutter suppression is achieved by reducing the sidelobe levels in specified regions of the receiver response. These techniques are directly applicable to array antennas; the analogous antenna problem would be to reduce sidelobe levels in a particular sector while preserving gain. Complex weighting is most successful when the clutter is limited in both range and velocity.     

Adaptive Radar Detection in Doubly Nonstationary Autoregressive Doppler Spread Clutter

The problem of adaptive radar detection in clutter which is nonstationary both in slow and fast time is addressed. Nonstationarity within a coherent processing interval (CPI) often precludes target detection because of the masking induced by Doppler spreading of the clutter. Across range bins (i.e., fast time), nonstationarity severely limits the amount of training data available to estimate the noise covariance matrix required for adaptive detection. Such difficult clutter conditions are not uncommon in complex multipath propagation conditions where path lengths can change abruptly in dynamic scenarios. To mitigate nonstationary Doppler spread clutter, an approximation to the generalized likelihood ratio test (GLRT) detector is presented wherein the CPI from the hypothesized target range is used for both clutter estimation and target detection. To overcome the lack of training data, a modified time-varying autoregressive (TVAR) model is assumed for the clutter return. In particular, maximum likelihood (ML) estimates of the TVAR parameters, computed from a single snapshot of data, are used in a GLRT for detecting stationary targets in possibly abruptly nonstationary clutter. The GLRT is compared with three alternative methods including a conceptually simpler ad hoc approach based on extrapolation of quasi-stationary data segments. Detection performance is assessed using simulated targets in both synthetically-generated and real radar clutter. Results suggest the proposed GLRT with TVAR clutter modeling can provide between 5–8 dB improvement in signal-to-clutter plus noise ratio (SCNR) when compared with the conventional methods.     

利用幅值信息的超视距雷达多路径概率数据互联算法

天波超视距雷达是通过电离层反射实现超视距广域监视的,其地理坐标系下的量测方程存在强非线性,同时由于电离层的不同分层,造成了多路径传播的严重问题,即同时存在多个量测模型。多路径概率数据互联(MPDA)滤波器将坐标配准与概率数据互联相结合,解决了超视距目标跟踪中的多路径传播问题,但在杂波环境下滤波跟踪精度不高。文中提出了一种基于信号幅值特征信息的MPDA算法(A-MPDA),当跟踪单一的、存在4种可能非线性量测的非机动目标时,仿真结果表明所提出的算法比标准MPDA有更好的跟踪精度。     

A multipath data association tracker for over-the-horizon radar

A new algorithm, multipath probabilistic data association (MPDA), for initiation and tracking in over-the-horizon radar (OTHR) is described. MPDA is capable of exploiting multipath target signatures arising from discrete propagation modes that are resolvable by the radar. Nonlinear measurement models exhibiting multipath target signatures in azimuth, slant range, and Doppler are used. Tracking is performed in ground coordinates and therefore depends on the provision of estimates of virtual ionospheric heights to achieve coordinate registration. Although the propagation mode characteristics are assumed to be known, their correspondence with the detections is not required to be known. A target existence model is included for automatic track maintenance. Numerical simulations for four resolvable propagation modes are presented that demonstrate the ability of the technique to initiate and maintain track at probabilities of detection of 0.4 per mode in clutter densities for which conventional probabilistic data association (PDA) has a high probability of track loss, and suffers from track bias. A nearest neighbor version of MPDA is also presented     

Radar detection in clutter

Clutter is defined as any unwanted radar return. The presence of clutter in a range/Doppler cell complicates the detection of a target return signal in that cell. In order to quantify the effect of clutter on the probability of detection, we must first specify sets of models suitable for representing the clutter and target. The simplest and most common model for clutter is based on the gamma density. We include two additional models, the NCG and NCGG clutter models for low grazing angles. They are motivated by physical arguments, the latter of which can accommodate the well-known phenomenon of speckle. Using one of these models for clutter together with one of several models for targets, we determine, in a range/Doppler cell, expressions for probabilities of detection of a target in the presence of clutter. It is important to control the probability of false alarms. The presence of clutter in a cell necessitates an increase in the detection threshold setting in order to control false alarms, thus lowering the probability of detection. If the clutter level is unknown, then we need to take measurements of the clutter and use it to adjust the threshold. The more clutter samples we take, the better the estimate of the clutter level and the less is the resulting detection loss. Using the expressions for the probability of detection in clutter, we can quantify the detection loss for a pair of commonly used constant false-alarm rate (CFAR) techniques and investigate how the loss varies with different parameter values, especially with regard to the number of clutter samples taken to estimate the clutter level.     

Optimal CFAR detection in Weibull clutter

Optimal, in the maximum likelihood sense, constant false-alarm rate (CFAR) detection for Weibull clutter statistics, is investigated. The proposed OW (optimal Weibull) estimator is proved to be an asymptotically efficient estimator of the mean power of the Weibull clutter. Theoretical analysis of the OW-CFAR detector is provided, while detection performance analysis is carried out using the Monte Carlo simulation method. The operation of the median and morphological (MEMO)-CFAR detector in Weibull clutter statistics is also explained. It performs almost optimally in uniform clutter and, simultaneously, it is robust in multitarget situations. The performance of the proposed OW-CFAR detector in uniformal Weibull clutter is used as a yardstick in the analysis of the MEMO cell-averager (CA) and ordered statistic (OS) CFAR detectors. Nonfluctuating and fluctuating (Swerling II) targets are considered in detection analysis. The performance of the detectors is also examined at clutter edges     

Clutter Suppression Properties of Weighted Pulse Trains

A common but troublesome requirement on radar sensors is the detection of a target in the interference from undesired scatterers, or clutter. Systems with coherent processing of pulse trains are uniquely suited for the purpose because, with pulse trains, it is possible to concentrate the receiver output for particular values of Doppler and thus suppress the clutter by Doppler filtering. This paper discusses to what degree the effectiveness of the method can be enhanced by tapering, or weighting, of the pulse amplitudes. The general results are illustrated by computer-plotted response functions for weighted pulse trains. The clutter suppression efficiency of weighting is calculated both for unilateral weighting in the receiver and for bilateral weighting in both receiver and transmitter. The significance of additional phase weighting is discussed and the results for pure amplitude weighting are compared with publishedwork on phase and amplitude weighting.     

Incoherent radar detection in compound-Gaussian clutter

The detection of incoherent pulse trains in compound-Gaussian disturbance with known spectral density is dealt with here. Two alternative approaches are investigated, The first, assuming perfect knowledge of the signal fluctuation law and implementing the Neyman-Pearson test on the observed waveform, turns out to be not applicable to the radar problem. The second, instead, relying on the generalized likelihood ratio optimization strategy, leads to a canonical detector, whose structure is independent of the clutter amplitude probability density function. Interestingly, this detector turns out to be constant false-alarm rate in the sense that threshold setting does not require any knowledge as to the clutter distribution, Moreover, since such a processor is not implementable in real situations, we also present an FFT-based (fast Fourier transform) suboptimum structure. Finally, we give closed-form formulas for the detection performance of both receivers, showing that both of them largely outperform the square-law detector, especially in the presence of very spiky clutter     

On Increasing Usable MTI Filter Bandwidth by Removing Linear-Phase Constraint

It has been shown in the literature that the linear-phase constraint of finite-duration impulse-response (FIR) digital filters can, under certain circumstances, be effectively traded either for a better filter amplitude response or a reduction in the number of filter coeficients. It is shown that such a tradeoff can be exploited for moving target indicator (MTI) radar signal processors to increase the usable bandwidth for target detection. Although it is demonstrated that the increase is significant for narrowband (ground) clutter, it is negligible for wideband (weather) clutter.