单框架控制力矩陀螺奇异问题研究

 研究单框架控制力矩陀螺群的奇异问题。给出了一种新的奇异度量，并推导出利用该度量的简洁的零运动公式。对于不同的构型，该度量反映了陀螺群Jacobian矩阵求逆运算的误差灵敏度，且具有相同的取值范围，因此在分析各种构型的优劣时具有可比性。上述结论通过数值仿真给出了验证。对常用的行列式形式奇异度量，给出其零运动的清晰公式。基于奇异值分解，给出陀螺群的各类操纵律，证明了奇异方向与分解矩阵的关系，明确框架锁死出现的条件和鲁棒操纵律调控的依据。给出五棱锥构型奇异角动量体的切片图，为角动量体内奇异的出现提供了认识的方法；对失效情况下的五棱锥构型，通过奇异角动量曲面图和具体的切片图，直观地得到其内部形式和特性的显著变化。     

A new steering approach for VSCMGs with high precision

A new variable speed control moment gyro (VSCMG) steering law is proposed in order to achieve higher torque precision. The dynamics of VSCMGs is established, and two work modes are then designed according to command torque:control momentum gyro (CMG)/reaction wheel (RW) hybrid mode for the large torque case and RW single mode for the small. When working in the CMG/RW hybrid mode, the steering law deals with the gimbal dead-zone nonlinearity through compensation by RW sub-mode. This is in contrast to the conventional CMG singularity avoidance and wheel speed equalization, as well as the proof of definitely hyperbolic singular property of the CMG sub-mode. When working in the RW single mode, the motion of gimbals will be locked. Both the transition from CMG/RW hybrid mode to RW single mode and the reverse are studied. During the transition, wheel speed equalization and singularity avoidance of both the CMG and RW sub-modes are considered. A steering law for the RWs with locked gimbals is presented. It is shown by simulations that the VSCMGs with this new steering law could reach a better torque precision than the normal CMGs in the case of both large and small torques.     

基于蛇行变轨的反舰导弹末制导律研究

提出了一种超声速反舰导弹针对海面机动目标的主动蛇行变轨导引设计方案。首先建立了反舰导弹、拦截弹和舰艇在航向平面的运动几何关系模型,然后基于Terminal滑模控制的思想进行了制导律设计,采用约束视线角和视线角速度的方法使反舰导弹在打击舰艇的过程中实现蛇行变轨,以能够规避敌方拦截导弹。仿真结果表明,该制导律具有期望的性能要求。     

基于NFTET的高超声速飞行器再入容错制导

针对以X-33为对象的三自由度高超声速飞行器,采用相邻可行轨迹存在定理(NFTET)设计了容错制导律以解决再入段执行器发生故障的轨迹重构问题。在标称情况下采用预测校正算法生成满足再入过程约束和终端约束要求的再入轨迹;当执行器发生故障时,飞行器气动参数、结构和舵面力矩都可能发生不可预测的变化,原先的轨迹不再满足制导要求,因此需要设计新型容错制导律。针对实际再入制导模型,基于NFTET设计容错制导算法对轨迹进行重构,得到满足故障情况下制导任务的可行轨迹。从仿真结果中可以看出,容错制导算法生成的新轨迹重新回到了约束范围之内,轨迹呈收敛趋势,使得高超声速飞行器从故障恢复到正常飞行状态,提高了飞行器的自主容错能力。     

大型航天器SGCMG系统基于模糊决策的操纵律设计研究

作为航天器制导、导航和控制系统的执行部件，单框架控制力矩陀螺是较为理想的大型航天器姿控系统的选择，但是单框架控制力矩陀螺系统（ＳＧＣＭＧ）存在严重的奇异现象，增加了操纵律的设计与开发的难度。本文对ＳＧＣＭＧ系统的奇异性进行了分析，利用模糊决策的思想确定了奇异测度，根据奇异测度梯度搜索法设计了基于模糊决策的ＳＧＣＭＧ系统操纵律。仿真试验表明该方法有效地保证了系统能够回避可避的奇异状态，为大型航天器操纵律设计提供了新的思路。     

旋转导弹单通道控制方法研究

通过分析旋转导弹的控制原理 ,从弹体舵面产生的周期等效控制力与导引头输出的误差信号之间的方位误差和幅值线性度两个方面 ,提出了一个最优的线性化信号与主控信号的频率比。建立了刚体弹道仿真软件 ,以某型防空导弹为背景进行了一系列的仿真计算。仿真结果表明 ,这一最佳频率比大大提高了导弹的制导精度 ,减小了脱靶量。     

Control and stabilization of nonlinear uncertain elastic roboticarm

An approach is presented to the control of an uncertain nonlinear flexible robot arm (PUMA-type) with three rotational joints. The third link is assumed to be elastic. A torquer control law, which is a function of the trajectory error, is derived for controlling the joint angles. The knowledge of the system dynamics is not required for the derivation of the controller. This controller includes a reference model to generate command joint angle trajectories, and a dynamic system in the feedback path which requires only joint angle and rate for feedback. The torquer controller asymptotically decouples the elastic dynamics into two subsystems, representing the transverse vibration of the elastic link in two orthogonal planes. For the damping of the elastic vibration, a force control law using modal velocity feedback is synthesized. Simulation results are presented to show that the combination of the torque and force control law accomplishes reference joint angle trajectory tracking and elastic mode stabilization despite the uncertainty in the system     

鸭式翼弹道修正火箭弹修正能力分析

采用十字型鸭式翼二维弹道修正火箭弹弹体布局,系统地研究了修正火箭弹的修正弹道理论,建立了修正质点弹道的数学模型。在Matlab中编制了四自由度弹道模型,仿真分析可用于分析无控和有控情况下的弹道修正能力问题。大射角下舵机45s起控纵向修正效果最好,起控时间越早,横偏修正越好。舵偏角越大,修正能力越强。     

Decoupled ultimate boundedness control of systems and largeaircraft maneuver

The robust trajectory control of a class of nonlinear systems which can be decoupled by state-variable feedback is considered. It is assumed that the system matrices are unknown but bounded. A nonlinear control law is derived so that the tracking error in the closed-loop system is uniformly bounded and tends to a certain small neighborhood of the origin. The error dynamics are asymptotically decoupled in an approximate sense. The controller includes a reference trajectory generator and uses the integral feedback of the tracking error. On the basis of this result, a flight control system is designed for the control of roll angle, angle of attack, and sideslip in rapid, nonlinear maneuvers of aircraft. Simulation results are presented to show that large, simultaneous lateral and longitudinal maneuvers can be performed in spite of the uncertainty in the stability derivatives     

Composite impact vector control based on Apollo descent guidance

A new three-dimensional missile guidance law to control the impact vector against a stationary target is proposed. The composite guidance law has two well-known components: Apollo descent guidance and trajectory shaping guidance. These respectively linear and planar guidance laws are combined to achieve a specified impact direction. The main idea is to define an impact plane and to steer the missile onto this plane using Apollo descent guidance while concurrently performing trajectory shaping wi...     

三维空间拦截的前置追踪变结构制导律(英文)

This article aims to develop a head pursuit （HP） guidance law for three-dimensional hypervelocity interception, so that the effect of the perturbation induced by seeker detection can be reduced. On the basis of a novel HP three-dimensional guidance model, a nonlinear variable structure guidance law is presented by using Lyapunov stability theory. The guidance law positions the interceptor ahead of the target on its tlight trajectory, and the speed of the interceptor is required to be lower than that of the target, A numerical example of maneuvering ballistic target interception verifies the rightness of the guidance model and the effectiveness of the proposed method.     

单推力航天器交会对接轨迹规划及跟踪控制

针对单推力航天器交会对接问题，提出一种轨迹规划及跟踪算法。首先，考虑到追踪航天器只沿本体X轴安装推力器，且推力方向固定，为了实现从起始位置转移至期望位置并满足姿态要求，基于三维螺旋线设计两阶段转移轨迹，根据初末位置以及末端速度方向要求，求解螺旋线参数。该螺旋线可以保证在初末速度方向固定情况下，曲率积分最小。其次，为了降低轨迹跟踪难度并减小初始时刻的位置跟踪控制力，需要将转移轨迹初始速度与追踪星X轴重合。传统螺旋线无法满足该约束条件。本文对传统螺旋线进行改进，提出一种旋转螺旋线轨迹设计方法。通过引入姿态旋转矩阵，将螺旋线在三维空间旋转，在不改变曲线形状的前提下满足初末位置及速度方向要求。然后，为了跟踪转移轨迹以及跟踪期望推力方向，提出基于CLF（Control Lyapunov Function）的滑模控制策略，当追踪星X轴与期望推力方向夹角较大时，采用CLF，保证最优性；当姿态误差收敛至滑模面附近时，切换为滑模控制，以提升系统鲁棒性。最后，通过仿真验证旋转螺旋线相比于传统螺旋线的优势。     

Emitter Location Independent of Systematic Errors in Direction Finders

A scheme is suggested for the passive location of radio emitter position by using a mobile direction finder. The vehicle carrying the direction finder is made to maneuver such that the apparent direction of arrival is held constant. The resulting trajectory of the vehicle is a logarithmic spiral. The true direction of arrival can be obtained by monitoring the parameters of the spiral trajectory without using the value of the direction fimder reading. Two specific algorithms to eliminate direction finder bias are presented and their sensitivity to random errors in measurement assessed.     

高超声速飞行器再入多段导引方法研究

针对通用航空飞行器(CAV)的再入飞行问题,研究了一种滑翔式再入飞行器的三自由度轨迹快速生成方法。该方法将再入轨迹分为初始下降段、过渡段和占大部分飞行时间的拟平衡滑翔段,引入拟平衡滑翔条件(QEGC),将过程约束转换成倾侧角制导律的上界。结合预测校正方法在线设计满足各种轨迹约束的倾侧角制导律,最后在计算机上进行制导仿真。仿真结果表明,该方法可快速地得到满足过程约束和目标要求的弹道。     

一种扩展的比例导引规律及其弹道方程的构建

在传统的动力学微分方程的基础上提出了一种扩展的比例导引法 ,并给出了该导引规律下的相对弹道方程。文中的推理过程表明 ,这种导引规律对导弹、目标的运动速度几乎没有限制 ,理论上说明运用该制导规律的导弹将能对付高机动大速度目标 ,其弹道方程的建立 ,使得研究该制导规律下的弹道特性成为可能。     

Trajectory control strategy of cathodes in blisk electrochemical machining

A turbine blisk, which combines blades and a disk together, is one of the most important components of an aero engine. In the process of blisk electrochemical machining (ECM), the sheet cathode, which is usually used as a tool electrode, has a complicated structure. In addition to that, the channel between the adjacent blades is narrow and twisted, so interference is apt to happen when the sheet cathode feeds into the channel. Therefore, it is important to choose suitable trajectory control strategy. In this paper, a new trajectory control strategy of the sheet cathode is presented and corresponding simulation analysis is conducted on the basis of an actual blisk model. The simulation results demonstrate that the sheet cathode can feed into the channel by a spatial line trajectory without interference. Moreover, the verification experiments are carried out according to the simulation. The experimental results show that the cathode can move into the channel without interference. It is verified that the new trajectory control strategy is correct and can be used in the blisk ECM process successfully.     

Control of nearly singular decoupling systems and nonlinearaircraft maneuver

The author treats the question of control of a class of nonlinear systems using state variable feedback whose input/output map is nearly singular. Although the existing decoupling theory is applicable to such systems, this requires a large amount of control, which may not be permissible. A decoupling approach using state variable feedback in an approximate sense, but requiring a small control magnitude is considered. A decoupling scheme is presented that gives rise to a singularly perturbed system describing the fast dynamics of the control vector. The quasi-steady-state solution of the system gives a control law that decouples the system in an approximate way. The controller includes a servocompensator and a reference trajectory generator. Based on this result, a control law for approximate decoupling of roll angle, angle of attack, and sideslip in rapid, nonlinear airplane maneuvers is derived. Simulated responses of the closed-loop system show that large, simultaneous lateral and longitudinal maneuvers can be accurately performed in spite of uncertainty in stability derivatives     

基于Bi-LSTM 的无人机轨迹预测模型及仿真

传统轨迹预测模型存在模型简化较大、考虑因素较少等问题。结合飞行轨迹连续性、时序性、交互性 的特点,提出基于双向长短期记忆(Bi-LSTM)神经网络的轨迹预测模型,将入侵者的位置、姿态和两机的相对 信息同时作为轨迹预测模型的输入,更加符合真实轨迹变化规律;对建立的基于 Bi-LSTM 的轨迹预测模型采 用综合考虑动量和速度的自适应调整学习步长的学习算法进行训练;并与基于 Elman神经网络的轨迹预测模 型进行仿真对比分析。结果表明:与基于 Elman神经网络的轨迹预测模型相比,所提模型在不同方向预测200 个点的平均绝对误差不超过4m,三维预测效果更优,可以较为准确地进行轨迹预测。     

基于BSP-ANN的四旋翼无人机轨迹跟踪方法

为了降低无人机轨迹跟踪误差,提高系统抗干扰能力,对反步（Backstepping）法进行改进提出一种基于反步神经网络（BSP-ANN）的无人机轨迹跟踪方法。首先,建立了四旋翼无人机运动学模型;然后,结合Backstepping方法在无人机的姿态控制、轨迹跟踪控制系统中引入Sigma-Pi神经网络,同时设计Sigma-Pi神经网络控制率,并证明该控制率满足Lyapunov意义下的系统稳定;最后,分别给出了相应的仿真实验。仿真结果表明：该算法可以有效降低跟踪误差,缩短无人机跟踪时间,同时可以提高系统的抗干扰能力。     

Integrated Entry Guidance for Reusable Launch Vehicle

A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method.