Random Error in ARGOS and SARSAT Satellite Positioning Systems

ARGOS and SARSAT are two satellite Doppler navigation systems in which low cost ground beacons transmit bursts of stable frequency signals. The Doppler shifted signals received by the satellite provide the positions of the beacons. The positioning error is dominated by a random component, due mainly to the short-term frequency stability of the beacon oscillator. Theoretical analysis and explicit expressions of the random errors are given.     

适用于矢量接收机的模糊自适应CKF方法研究

卫星导航接收机矢量跟踪环路的核心就是用一个Kalman滤波器将标量接收机的信号跟踪和导航解算一起完成,优点是能够形成通道之间的相互辅助,缺点是也会相互影响。尤其在部分卫星信号被遮挡或者部分通道信号质量较差的环境下,问题通道会影响其他通道,甚至导致矢量跟踪环路滤波器发散,常规的方法是检测故障通道然后将故障通道剔除,这样需要对导航滤波器进行变维操作。针对此问题,提出了一种新的消除问题通道对其他通道影响的方法,同时不需要对导航滤波器进行变维。首先给出了一种标度因子,用来判断通道是否存在故障通道,然后给出一种利用模糊控制的导航滤波器自适应调整方法。仿真表明,在通道卫星信号被频繁遮挡的极端情况,矢量接收机依旧能保持正常的导航精度,并没有明显受到误差通道的影响,同时避免了对导航滤波器进行变维操作。     

Precision Synchronization of Satellites in Inclined Orbits

Synchronization between an Earth station and a satellite in geostationary orbit can be accomplished by repeatedly transmitting sync burst signals and making small timing corrections. However, when a satellite is in an inclined nonsynchronous orbit, such as a navigation satellite, the problem is more complex due to the high relative velocity of the navigation satellite relative to the ground. One possible solution to the problem is examined by employing a satellite in geostationary orbit to communicate with the navigation satellite. It is shown that the uplink delay to the navigation satellite can be deduced to an accuracy of about 1 ns by making a single round trip transmission.     

Solar-tracking methodology based on refraction-polarization in Snell's window for underwater navigation

Underwater navigation system is an indispensable part for autonomous underwater vehicles. Due to the indiscernibility of satellite signal, however, the underwater navigation problem is quite challenging, and a satellite-free navigation scheme should be looked for. Polarization navigation, inspired by insects’ capability of autonomous homing and foraging, is an alternative solution to satellite navigation with great application potential. Underwater polarization provides an indirect sun compass t...     

星座自主导航可视化仿真与分析系统的研制

近年来,星座自主导航技术在卫星自主导航领域越来越引起人们的关注。为更好地研究星座自主导航方法,本文从数据分析、视景仿真和导航解算三个方面论述了星座自主导航视景仿真系统的实现过程。该仿真系统采用ADO技术、OpenGL技术和MATCOM软件来分别实现数据分析模块、视景仿真模块和星座自主导航解算。实验结果表明,软件最终达到了集数据分析、视景仿真和导航解算于一体的仿真效果。     

Digital Cartographic Data: A Case for Electronic Delivery

The demand for digital cartographic data and information is expanding rapidly, most dramatically in navigation. Electronic chart and map display systems are now reaching the market for land, sea and air navigation and rapid delivery of the latest data is absolutely essential. Commercial aviation is moving rapidly toward the automated cockpit with the new generation Flight Management Computer System. Marine navigation is experiencing a similar growth in integrated navigation systems and every major automobile manufacturer has plans for digital map navigation systems. The largest, most complete data bases to meet these requirements are Government held and difficult to access, thus most private sector firms re-digitize and agencies maintain near duplicate data. Present inefficiencies, introduced errors, and delays stem from lack of rapid access and delivery of digital data. Use of newly developed satellite data broadcast technology offers a solution.     

User-level reliability monitoring in urban personal satellite-navigation

Monitoring the reliability of the obtained user position is of great importance, especially when using the global positioning system (GPS) as a standalone system. In the work presented here, we discuss reliability testing, reliability enhancement, and quality control for global navigation satellite system (GNSS) positioning. Reliability testing usually relies on statistical tests for receiver autonomous integrity monitoring (RAIM) and fault detection and exclusion (FDE). It is here extended by including an assessment of the redundancy and the geometry of the obtained user position solution. The reliability enhancement discussed here includes rejection of possible outliers, and the use of a robust estimator, namely a modified Danish method. We draw special attention to navigation applications in degraded signal-environments such as indoors where typically multiple errors occur simultaneously. The results of applying the discussed methods to high-sensitivity GPS data from an indoor experiment demonstrate that weighted estimation, FDE, and quality control yield a significant improvement in reliability and accuracy. The accuracy actually obtained was by 40% better than with equal weights and no FDE; the rms value of horizontal errors was reduced from 15 m to 9 m, and the maximum horizontal errors were largely reduced.     

Receiver-channel based adaptive blind equalization approach for GPS dynamic multipath mitigation

Aiming at mitigating multipath effect in dynamic global positioning system (GPS) satellite navigation applications, an approach based on channel blind equalization and real-time recursive least square (RLS) algorithm is proposed, which is an application of the wireless communication channel equalization theory to GPS receiver tracking loops. The blind equalization mechanism builds upon the detection of the correlation distortion due to multipath channels; therefore an increase in the number of correlator channels is required compared with conventional GPS receivers. An adaptive estimator based on the real-time RLS algorithm is designed for dynamic estimation of multipath channel response. Then, the code and carrier phase receiver tracking errors are compensated by removing the estimated multipath components from the correlators’ outputs. To demonstrate the capabilities of the proposed approach, this technique is integrated into a GPS software receiver connected to a navigation satellite signal simulator, thus simulations under controlled dynamic multipath scenarios can be carried out. Simulation results show that in a dynamic and fairly severe multipath environment, the proposed approach achieves simultaneously instantaneous accurate multipath channel estimation and significant multipath tracking errors reduction in both code delay and carrier phase.     

基于改进POCET技术的通导一体化信号设计

随着低轨卫星组网的发展,结合我国北斗三号全球卫星导航系统的全面建成,研究兼容北斗的通信导航一体化技术日益迫切。为使卫星上的高功率放大器工作在非线性饱和区,以达到较高的发射功率效率,需要保证合成信号的恒包络特性。考虑北斗导航信号与低轨卫星通信信号频点不同,且待复用信号分量较多,以相位优化恒包络发射(POCET)技术为基础,提出了一种改进的多频点多非独立信号分量恒包络复用技术,对七路信号进行复用,利用罚函数进行目标函数优化得到最优解。通过分析其信号特性,表明该方法具有较高的复用效率,并能有效抑制非独立分量造成的波形畸变,从而实现通信导航一体化信号设计,为未来基于低轨卫星的通信导航一体化波形设计提供了思路。     

基于改进POCET技术的通导一体化信号设计

随着低轨卫星组网的发展,结合我国北斗三号全球卫星导航系统的全面建成,研究兼容北斗的通信导航一体化技术日益迫切。为使卫星上的高功率放大器工作在非线性饱和区,以达到较高的发射功率效率,需要保证合成信号的恒包络特性。考虑北斗导航信号与低轨卫星通信信号频点不同,且待复用信号分量较多,以相位优化恒包络发射（POCET）技术为基础,提出了一种改进的多频点多非独立信号分量恒包络复用技术,对七路信号进行复用,利用罚函数进行目标函数优化得到最优解。通过分析其信号特性,表明该方法具有较高的复用效率,并能有效抑制非独立分量造成的波形畸变,从而实现通信导航一体化信号设计,为未来基于低轨卫星的通信导航一体化波形设计提供了思路。     

基于气压高度辅助的机载自主完好性监测算法

卫星接收机自主完好性监测是指根据用户接收机的多余观测值监测用户定位结果的完好性,其目的是在导航过程中检测出发生故障的卫星,并保障导航定位精度。针对卫星接收机自主完好性监测算法可用性不足的问题,结合机载实际导航系统配置,提出了一种基于气压高度表辅助的机载自主完好性监测算法。综合利用卫星导航系统及气压高度表观测信息,建立联合系统的观测模型,推导了基于多解分离的完好性监测及保护级别计算方法。仿真结果表明,相比于传统的接收机自主完好性监测算法,该算法在可见星为5颗时仍能识别故障卫星。该算法具有更好的故障检测能力及可用性,能有效提高卫星导航系统的完好性监测性能,从而保证卫星导航系统的精度和可靠性。     

利用GNSS实现高轨卫星自主导航的新方案

针对GNSS应用于GEO卫星导航存在的导航信号弱、可见卫星少、定位几何差等突出问题,探讨了一种在GPS导航星冲天面安装导航天线并辐射导航信号的新方案,设计了冲天面天线和GEO接收天线的波束宽度和增益以及讨论了冲天天线所需发射功率,分析了新方案中GEO卫星对GPS卫星可见性、GDOP和定位精度。分析表明,新方案仅需从现有导航星引出一部天线,即可实现以小于10W的功率代价使得GEO卫星80%以上的时间里可以利用GPS系统定位,且定位精度约77m。通过仿真验证了本方案的可行性。     

Enhancing filter robustness in cascaded GPS-INS integrations

Filter robustness is defined herein as the ability of the Global Positioning System/Inertial Navigation System (GPS-INS) Kalman filter to cope with adverse environments and input conditions, to successfully identify such conditions and to take evasive action. The formulation of two such techniques for a cascaded GPS-INS Kalman filter integration is discussed This is an integration in which the navigation solution from a GPS receiver is used as a measurement in the filter to estimate inertial errors and instrument biases. The first technique presented discusses the handling of GPS position biases. These are due to errors in the GPS satellite segment, and are known to be unobservable. They change levels when a satellite constellation change occurs, at which point they introduce undesirable filter response transients. A method of suppressing these transients is presented. The second technique presented deals with the proper identification of the filter measurement noise. Successful formulation of the noise statistics is a factor vital to the healthy estimation of the filter gains and operation. Furthermore, confidence in the formulation of these statistics can lead to the proper screening and rejection of bad data in the filter. A method of formulating the filter noise statistics dynamically based on inputs from the GPS and the INS is discussed     

A Closed-Form Solution for Doppler Satellite Navigation

Doppler satellite navigation relies on an initial position estimate with an iterative solution. A closed-form solution of this problem, which forms the basis of a complete analytic treatment, is presented. The solution is exact for arbitrary satellite orbits with an ellipsoid Earth model.     

Carrier phase navigation architecture for shipboard relative GPS

Carrier phase differential GPS (DGPS) navigation architectures and algorithms for automatic shipboard landing of aircraft are described. Processing methodologies are defined to provide high integrity carrier phase cycle estimation and positioning by optimally exploiting the complementary benefits of measurement filtering and satellite geometric redundancy for the terminal navigation problem. Navigation performance sensitivity to the standard deviations of raw carrier and code phase measurement errors, measurement error correlation times, and the filtering duration is quantified. Necessary conditions to ensure acceptable terminal navigation availability are specifically defined.     

SINS/BDS紧组合系统中自适应 两阶段扩展卡尔曼滤波

在实际应用中，以伪距/伪距率为观测量的SINS/BDS紧组合导航系统，存在量测噪声的统计特性与实际不相符的情况，传统扩展卡尔曼滤波（EKF）方法无法有效解决这一问题，从而引起滤波误差增大。提出了一种SINS/BDS紧组合导航系统的GDOP估算及在线估计量测噪声的自适应两阶段EKF（ATEKF）方法，该方法使用经过紧组合修正后的SINS输出的位置，并结合星历数据中提供的卫星位置求解GDOP。在此基础上，利用GDOP值以及新息，实现了紧组合导航系统的量测噪声方差阵（Rk）的在线实时估计，从而达到自适应滤波的效果，改善导航精度。     

北斗空间信号误差统计特征及描述方法研究

通过对比北斗卫星导航系统(BeiDou Navigation Satellite System,BDS)广播星历与事后精密星历,提取了轨道和卫星时钟误差。基于北斗轨道误差及北斗卫星时钟误差统计特征分析,构建区别于全球定位系统(Global Positioning System,GPS)的BDS空间信号用户测距误差(Signal-In-Space User Range Error,SISRE)描述方法,对BDS广播星历中用户测距精度(User Range Accuracy,URA)进行了验证。6个月的北斗数据测试结果表明,北斗GEO、IGSO和MEO卫星的URA分别为3.0m、1.9m和1.6m。     

全球精密单点定位性能评估

随着中国北斗三号卫星导航系统（BDS-3）全面建成与开通，北斗卫星导航系统已步入了新发展阶段，基于BDS-3实现全方位、多层次、高精度应用已成为地学研究中一项基本任务。利用全球最新均匀分布的10个MGEX跟踪站，分别从24 h内接收到的卫星数、卫星位置精度因子（PDOP）、卫星数据解算完整率和双频非组合精密单点定位（PPP）静态/动态定位精度等方面系统深入地评估了BDS-3在全球范围内的可用性。结果表明，测站对卫星跟踪能力与配备的接收机类型和区域位置有强相关性，单BDS-3卫星在全球范围内具有较强的连续定位能力，当使用SEPT POLARX5和JAVAD TRE_3接收机的情况下，数据解算完整率可达100%。此外，水平方向和高程方向定位精度分别优于2 cm和3 cm，并且在联合使用BDS-2和BDS-3定位的条件下，可使得静态定位精度在东、北和高程方向进一步提升37.6%,25.3%和38.9%。     

Analysis of upgraded GPS internal Kalman filter

GPS receivers with provisions for inertial navigation system (INS) aiding are designed with internal Kalman filters that model generic INSs and process the basic GPS pseudorange and deltarange (range-rate) data to produce an output of inertially-smoothed, “GPS-derived” position and velocity. These Kalman filters model only the basic nine INS errors (position, velocity, and tilt) and do not model any INS gyro or accelerometer errors. It was found that a significant performance improvement could be achieved under conditions of degraded GPS satellite availability by augmenting this type of filter with the six INS gyro and accelerometer bias errors. It is, therefore, recommended that serious consideration be given to incorporating these states into the design of the GPS internal Kalman filter