基于相控阵雷达天线俯仰多波位相扫的设计与应用

分析研究了如何设计平面相控阵雷达天线多波位相扫的基本原理,提出了36行平面相控阵雷达天线在俯仰上实现多波位发射波束、接收波束形成与展宽方法.通过微波暗室的测试,天线技术指标完全达到了平面相控阵雷达天线多波位相扫的技术要求,实现了一维相控阵面高增益、高灵敏度、低噪声、大动态范围技术指标.     

一种雷达模拟器天线系统设计

该系统采用角锥喇叭天线组成比幅测角系统,介绍了一种用于雷达模拟器的天线系统设计,解决了方位波束宽度大和天线增益高之间的矛盾,具有结构简单、易于实现、天线增益和测角精度高等特点。经测角误差分析和电磁仿真,证明天线系统的增益系数、测角范围和测角精度等主要技术指标满足雷达模拟器设计要求,具有推广应用价值。     

一种低副瓣波纹喇叭天线的设计与实现

文章设计了一种高斯分布的波纹喇叭天线,具有增益高、转换效率高、交叉极化低、相位中心不随频率变化的特点。该天线采用正交馈电,结构简单紧凑,以双线极化或圆极化方式工作。根据天线设计参数,建立了天线模型,进行了优化设计。仿真和实测结果表明,天线在频率34～36 GHz范围内,增益大于20dBi,方向图在E面和H面具有良好对称性,副瓣电平不大于-26 d B,驻波比小于1.5,整体性能满足工程应用要求。     

飞机射频隐身表征参量及其影响因素分析

 随着军事装备的不断发展,无源探测器（电子支援系统、雷达告警接收机和电子情报接收机）对飞机的探测能力大大提高。为了避免机载雷达设备辐射的射频(RF)信号被截获,要求飞机具有良好的射频隐身性能。综合考虑机载雷达探测距离和无源截获接收机截获距离之间的关系以及天线空域扫描方式发生捷变对飞机射频隐身性能的影响,指出了用施里海尔(Schleher)截获因子评价飞机射频隐身性能的不足,并提出用信号截获率来表征飞机射频隐身特性的方法。最后,对影响信号截获率的因素进行分析与计算,在此基础上给出飞机实现射频隐身的途径与方法。该评价方法综合了飞机在时域、频域和空域上的射频隐身特性,对飞机的射频隐身设计具有参考价值。     

螺旋天线几何尺寸的优化设计

本文首先导出了螺旋天线输入阻抗的计算公式。然后，在使天线输入阻抗满足技术要求的条件下，对螺旋天线的几何尺寸进行了优化设计。     

联翼布局传感器飞机多目标优化设计

针对联翼布局传感器飞机的任务需求特点,建立了专用于该类无人机的能够综合考虑气动、结构和雷达性能的多目标优化设计模型。利用改进的类函数/形函数参数化方法完成整机外形进行参数化,利用风洞试验进行了气动分析模型的验证,基于工程梁理论搭建了联翼布局结构重量估算模型。在雷达距离方程的基础上,建立了机翼内部雷达天线性能估算的数学模型。利用该模型,能够在优化过程中考虑到内置机载预警天线安装位置和性能评估对翼型选择、结构重量和气动特性的影响,最终得到全局最优设计。对某方案的优化结果表明,相较于优化前,多目标优化结果能够明显提升整机升阻比和前后视雷达探测范围,同时减轻结构重量。优化结果和敏感性分析表明了该多目标优化模型的可行性和必要性。     

Kalman Filter Applications in Airborne Radar Tracking

This paper studies the application of Kalman filtering to single-target track systems in airborne radar. An angle channel Kalman filter is configured which incorporates measures of range, range rate, and on-board dynamics. Theoretical performance results are given and a discussion of methods for reducing the complexity of the Kalman gain computation is presented. A suboptimal antenna controller which operates on the outputs of the angle Kalman filter is also described. In addition, methodological improvements are shown to exist in the design of range and range-rate trackers using the Kalman filter configuration.     

卫星导航系统星间链路空间参数与覆盖分析

分析一种全球导航星座的星间链路，得到了星间距离、俯仰角、方位角等参数的变化曲线。最后，通过对这些空间参数的变化曲线进行分析，对星间链路的天线设计提出了基本要求。     

基于仿生原理的超角分辨天线阵设计

以昆虫的声波超分辨定位原理为基础,提出了对应的电小仿生天线阵系统,增强了电小天线阵的角度分辨能力。在具体设计过程中,运用奇偶模分析方法,推导出在不损失功率的条件下,相位差放大因子与天线阵元的阻抗和互耦之间的约束关系,与此同时提出了可获得更大相位差放大因子的设计方法。以此理论为基础,设计了一个二元电小天线阵,仿真并测试了其角度分辨性能,测试结果与理论分析一致,有力地验证了仿生天线阵理论的正确性与设计方法的有效性。     

Optimized RF test range for educational purposes

Both the design and construction of a composite scale airframe and the equipment for an anechoic test range plus the in-house production of absorptive wall covering-all for engineering education-are briefly described. It is shown, that low cost home-made absorbing material with an attenuation of 30 dB or more can be designed. Waveguide and ground plane antennas for test purposes can be constructed from surplus materials. In this case the design and measurements of a 3 GHz antenna pair are shown. Finally, as a test object, a cheap yet effective scale model of a modern fighter aircraft is used for measurements of radar cross section and antenna installations. As a demonstration of the total system capabilities, the measurement of installed F-18 antennas is shown     

一种W—V型宽带微带天线的设计与仿真

提出一种新型的宽带微带探针馈电贴片天线。天线采用空气介质层,在W形接地板顶端利用同轴探针馈电V形贴片电线,这种设计使探针在介质基板中长度较短,产生的电感较小,同时增加了介质基板的厚度,因此使天线得到较大的工作带宽。选择合适的天线尺寸,通过仿真软件HFSS测出的阻抗带宽（VSWR≤1．5）达到48．6％,覆盖2．12GHz-3．48GHz（S波段）频率范围。     

Active phased array design for high reliability

We discuss strategies for designing: active phased array antennas with high reliability. We show how to consider fault-tolerance in the design of the antenna architecture, so that replacement of failed components can be avoided for an extended period of time. First, we address the dependence of antenna life cycle cost on component failure rates. Then we discuss the design of active phased array architecture for maximizing antenna mean-time-between-failures (MTBF). The antenna MTBF is defined in terms of a specified degradation in peak sidelobe level. We present simulated data showing the effect of random, single, and clustered element failures on the peak sidelobe level of a low sidelobe antenna aperture. We use these data as a basis for analyzing various phased array architectures in terms of their antenna MTBF     

Design and analysis of truss deployable antenna mechanism based on a novel symmetric hexagonal profile division method

As the deployment, supporting, and stability mechanisms of satellite antennas, space-deployable mechanisms play a key role in the field of aerospace. In order to design truss deployable antenna supporting mechanisms with large folding rate, high accuracy, easy deployment and strong stability, aiming at the geometric division of the parabolic reflector, a novel method based on symmetric hexagonal division and its corresponding modular truss deployable antenna mechanism is proposed, and the original method based on asymmetric triangular division and its corresponding mechanisms are presented for comparative analysis. Then, the screw theory is employed to analyze the mobility of different mechanisms. Furthermore, the improved three-dimensional mesh method is used to divide the reflector surface of a large parabolic antenna designed by the two different methods, and the profile accuracy and the type of links are taken as the evaluation indexes to quantitatively analyze the division results. Finally, a three-dimensional model of the modular deployable mechanism based on the symmetric hexagonal design is developed, and the deployable mechanisms with different configurations based on the two design methods are compared and analyzed from the mechanical perspective. The research results provide a good theoretical reference for the design of deployable truss antenna mechanisms and their application in the aerospace field.     

A Domestic Satellite Design

This paper deals with the design parameters of a communications satellite which would be capable of providing domestic telephony, data, and television distribution services. Certain important aspects of the design are discussed, including satellite antenna beam coverage, transponder bandwidth, and transponder radiated power for a given weight range. A baseline satellite design is then presented which has 24 transponders (with 4000 watts radiated power on-axis and 34-MHz radio-frequency bandwidth) fully accessible from the 48 contiguous United States. The design uses crossed linear polarization to reuse the satellite transmit and receive frequency spectrum.     

Ship-mounted satellite tracking antenna with fuzzy logic control

A robust satellite tracking antenna is designed to cope with the sensor imprecision and the highly noisy sea environment. Fuzzy logic is utilized for the controller imprecision and the highly noisy sea environment. Fuzzy logic is utilized for the controller design as well as inaccurate data interpretation. The fuzzy-rule based controller eliminates the need to model the nonlinear and noisy ship-mounted antenna system. With Global Positioning System and the tracking controller the antenna can be brought to a neighborhood of the desired orientation. Spiral search with signal power feedback can then servo the antenna to the true orientation. Computer simulations and antenna experiments verify our design is indeed robust and effective     

基于角度分集的机载超宽带MIMO天线设计

为了提高机载通信设备信道容量和进一步减小天线安装空间，提出一种采用角度分集技术的超宽带（UWB）多输入多输出（MIMO）天线。该天线将Vivaldi天线和超宽带槽天线进行了集成设计，无需采用解耦结构便可获得较高的端口隔离度，大大提高了数据传输率。通过在Vivaldi天线辐射臂上开一对方形缝隙和在介质板背面增加长方形辐射贴片，可以有效减小天线的尺寸，设计的UWB-MIMO天线尺寸为36 mm×36 mm×0.8 mm。给出了天线的设计流程，加工了天线实物，并对其进行了测量。仿真和实测结果表明MIMO天线具有超宽的阻抗带宽，可以覆盖整个3.1~10.6 GHz超宽带频段。Vivaldi天线阻抗带宽为2.8~15.9 GHz，UWB槽天线阻抗带宽为1.8~12.7 GHz，天线端口隔离度均在-10 dB以下。测量了天线的辐射性能和增益特性，实测结果与仿真结果吻合较好，证明了该天线的有效性。该天线可以应用于超宽带无线通信系统和机载阵列天线系统中。     

偏焦偏置抛物面多波束天线的分析与设计

以口径场法为基础对偏置抛物面天线进行建模分析,可方便有效地计算馈源数目任意、馈源放置位置任意的偏置抛物面天线的方向图。通过优化对馈源位置进行调整,使得各波束的性能达到设计的要求,最终实现多波束天线。绕特定的轴旋转馈源阵列,可以实现更大空间的扫描。     

定向耦合器在天线隔离度测试中的应用

飞机机载天线之间可能会因电磁能量互相耦合而产生电磁干扰,天线隔离度测试是验证机载天线布局设计的重要手段之一。根据定向耦合器性能参数定义,通过测量定向耦合器耦合端口和隔离端口的功率值计算出发射天线的净输入功率和接收天线的净输出功率,从而得到天线隔离度。通过机上测试,这种隔离度测试方法简便快捷、稳定可靠,试验结果准确有效。     

Small satellite access of the Space Network

Small satellites have been perceived as having limited access to NASA's Space Network (SN). The potential for satellite access of the Space Network when the design utilizes a fixed antenna configuration and low-power, coded transmission is analyzed. From the analysis, satellites using this configuration in high-inclination orbits are shown to have a daily data throughput in the 100 to 1000 Mbit range using the multiple access communications service     

一种可齐平安装的机载复合结构宽带天线的设计

设计了一种可齐平安装的宽带超高频(UHF)天线.该天线由含有背腔结构的盘锥天线、盘锥顶盘与地板之间的短路结构、以及多板天线3个部分复合而成.这3个部分分别在频率的中端、低端和高端产生3个邻近的独立谐振点,从而有效地展宽了天线的工作带宽.分析了天线各主要结构参数对谐振频点和阻抗带宽的影响,给出了这些参数的最优值,并据此制...