共查询到20条相似文献,搜索用时 109 毫秒
1.
提出了一种基于CMAC神经网络与PID相结合的控制方法,利用传统的PID控制器实现反馈控制,保证系统的稳定性并抑制扰动;利用CMAC神经网络控制器实现前馈控制,保证系统的控制精度和响应速度。以某型飞机为例,针对不同的跑道(干、湿、冰)情况,将该方法和传统的PID控制方法在MATLAB环境下进行了数字仿真。仿真结果表明:基于CMAC-PID控制方法较传统的PID控制方法,可以大大地提高飞机防滑刹车效率,具有更好的刹车控制效果,并具有较强的鲁棒性,为飞机防滑刹车系统的控制提供一条新的思路。 相似文献
2.
3.
飞机刹车盘摩擦系数受到多种因素的影响和制约。为了研究刹车盘摩擦系数的变化对飞机刹车系统的影响,以C/C复合材料刹车盘为例,分析了影响飞机刹车过程中刹车盘摩擦系数的因素,利用BP神经网络建立摩擦系数动态模型,并将其整合到利用AMESim软件建立的飞机刹车系统模型中,进行了动态仿真分析。相对于传统的刹车系统建模仿真,考虑摩擦系数变化能更加真实地反映飞机刹车过程中各种参数的动态变化过程,能更好地模拟飞机刹车滑跑过程。 相似文献
4.
根据对飞机刹车过程动力学分析与建模,本文提出了一种基于无味卡尔曼滤波(UKF)的模糊神经网络控制律。本控制律结合了无味卡尔曼滤波对机体速度的良好估计效果和模糊神经网络控制器对不同系统参数的适应能力,能够很好完成对最佳滑移率的追踪任务。Matlab仿真试验结果显示,基于无味卡尔曼滤波的模糊神经网络控制器可以准确的估计飞机滑跑时的速度,改善飞机防滑刹车系统性能,提高刹车效率。 相似文献
5.
针对某型飞机的刹车系统,综合分析了引起起落架栽荷非对称的各种因素以及应用传统建模方法的不足,改进并建立了可适应非对称载荷影响的刹车系统双通道模型,设计出新的基于自动式轮间保护的平衡调节方案。 相似文献
6.
给出了新的基于并行计算机的半实物仿真方案,分析了系统组成,并依据刹车系统动态特性建立了部分模块的数学模型;最后在RedHawkLinux2.2平台上的RT-lab7.2.1环境下对整套系统进行了实物、实时的仿真测试,验证了半实物仿真系统的可行性、有效性。 相似文献
7.
8.
9.
10.
针对航空机轮刹车系统的现有模拟实验方法,提出了一种机轮刹车系统半实物仿真的实现方案,给出了系统方案的具体硬件环境和仿真软件的开发过程,探讨了半实物仿真实现中的关键技术。 相似文献
11.
分析了机轮防滑刹车系统的工作原理和防滑工作过程,介绍了减速度控制法、有限状态机法和滑移率控制法在3种防滑刹车控制器设计中的应用,阐述了使用模糊控制算法、滑模变结构控制算法和人工神经网络算法的滑移率控制器的设计。 相似文献
12.
High-efficiency aircraft antiskid brake control algorithm via runway condition identification based on an on-off valve array 总被引:1,自引:1,他引:1
The aircraft antiskid braking system is an important hydraulic system for preventing tire bursts and ensuring safe take-off and landing. The brake system adjusts the force applied on the brake discs by controlling the brake pressure. Traditional aircraft antiskid braking systems achieve antiskid performance by controlling the braking pressure with an electrohydraulic servo valve. Because the pilot stage of an electrohydraulic servo valve is easily blocked by carbonized hydraulic oil, the servo valve would become a dangerous weak point for aircraft safety. This paper proposes a new approach that uses an on-off valve array to replace the servo valve for pressure control. Based on this new pressure control component, an efficient antiskid control algorithm that can utilize this discontinuous feature is proposed. Furthermore, the algorithm has the ability to identify the runway circumstances. To overcome the discontinuity in the process of using an on-off valve array, the Filippov framework is introduced. The conditions of convergence of the system are also discussed. The results of the digital simulations and the hardware-in-the-loop (HIL) braking experiments are used to verify the efficiency and stability of the proposed control algorithm. The method also proves that the on-off valve array can replace the servo valve perfectly as a new type of antiskid braking pressure control component. 相似文献
13.
针对新型飞机除冰车加热系统的大惯性、纯滞后、非线性和模型不确定性等特点,提出了一种新的模糊复合控制方法。该方法将基于模糊规则切换的Fuzzy—PID双模控制与参数自整定模糊控制相结合,一方面利用基于模糊规则切换的Fuzzy—PID双模控制器增强系统的鲁棒性和抗干扰性,另一方面利用参数自整定模糊控制器加快系统的响应速度。理论分析和仿真结果表明,所设计的模糊复合控制方法能很好地适应飞机除冰车加热系统数学模型的大幅度变化,具有很大的实用价值。 相似文献
14.
构建飞机刹车系统方案设计环境,以提高飞机刹车系统方案设计阶段的设计效率和质量。研究刹车装置参数和防滑控制系统参数的快速确定方法,通过迭代的设计思想使结果符合设计要求;估算刹车装置性能和刹车系统的动态特性。在MATLAB/Simulink中建立刹车系统模型,通过MATLAB引擎调用的方式进行刹车系统的动力学分析;以某无人机刹车系统为设计实例进行其刹车系统的方案设计,动力学仿真中刹车系统工作良好,与实际工作状况基本吻合。结果表明:本文提供的飞机刹车方案设计方法快速有效。 相似文献
15.
基于Kalman滤波的变体飞行器T-S模糊控制 总被引:1,自引:0,他引:1
针对变体飞行器的跟踪控制问题,提出了一种基于Kalman滤波的T-S模糊控制方法。考虑飞行器系统状态不可测,引入惯导数据作为辅助信息,利用Kalman滤波算法融合飞控信息与惯导信息实现状态估计。由于变体飞行器在不同变形结构下气动特性变化较大,为便于控制器设计,采用小扰动线性化方法得到飞行器在不同平衡点处的局部线性模型,并通过状态反馈方法设计局部控制器,局部线性模型和局部控制器通过模糊集和模糊规则聚合成一个连续光滑的全局T-S模糊模型和T-S模糊控制器。通过综合Kalman滤波器与T-S模糊控制器得到一个基于Kalman滤波的T-S模糊控制器。仿真结果表明,该控制器在变形过程中能够实现状态估计,保证飞机的跟踪性能。 相似文献
16.
基于STAMP/STPA的机轮刹车系统安全性分析 总被引:1,自引:0,他引:1
把机轮刹车系统在飞机降落过程中的安全性问题当作系统控制问题,不采用基于故障概率模型的事故模型,而是采用基于系统理论的事故模型和过程(STAMP),构建机轮刹车系统在飞机降落过程中的STAMP控制关联模型和系统理论过程分析(STPA)反馈控制回路。根据系统运行的上下文信息识别机轮刹车系统在飞机降落过程中的不安全控制行为,分析产生不安全控制行为的关键原因。对机轮刹车系统在飞机降落过程中的不安全控制行为进行仿真研究,结果表明了STAMP/STPA的有效性和用仿真方法分析安全性问题的可行性。 相似文献
17.
Traditional hydraulic brake systems require a complex system of pipelines between an aircraft engine driven pump (EDP) and brake actuators, which increases the weight of the aircraft and may even cause serious vibration and leakage problems. In order to improve the reliability and safety of more electric aircraft (MEA), this paper proposes a new integrated self-powered brake system (ISBS) for MEA. It uses a hydraulic pump geared to the main wheel to recover a small part of the kinetic energy of a landing aircraft. The recovered energy then serves as the hydraulic power supply for brake actuators. It does not require additional hydraulic source, thus removing the pipelines between an EDP and brake actuators. In addition, its self-powered characteristic makes it possible to brake as usual even in an emergency situation when the airborne power is lost. This paper introduces the working principle of the ISBS and presents a prototype. The mathematical models of a taxiing aircraft and the ISBS are established. A feedback linearization control algorithm is designed to fulfill the anti-skid control. Simulations are carried out to verify the feasibility of the ISBS, and experiments are conducted on a ground inertia brake test bench. The ISBS presents a good performance and provides a new potential solution in the field of brake systems for MEA. 相似文献
18.
19.
20.
针对包含非线性和不确定性的飞机防滑刹车控制系统,本文提出了一种基于LuGre摩擦模型的滑模变结构控制器的设计方法.通过分析系统模型,离线构建了在不同速度和路面参数条件下系统的最优滑移率控制表,同时使用基于动态模型的观测器技术对轮胎/路面不确定的结合性能进行在线辨识.并利用指数趋近率的滑模变结构控制方法有效地抑制了系统的抖振. 相似文献