共查询到20条相似文献,搜索用时 125 毫秒
1.
徐焕然 《中国民航学院学报》1992,10(1):58-64
本文根据航空发动机和动力传动系统减速器的特点,提出了常用的NGW型行星减速器设计是“机械设计”课程设计的最佳题目。扼要分析了其计算特点和结构特点,并给出了设计题目及部分原始数据以供参考。 相似文献
2.
3.
4.
FDM快速成型技术及其应用 总被引:9,自引:0,他引:9
阐述了FDM快速成型技术的工作原理和工艺特点,介绍了FDM系统的发展动态及快速成型市场情况,结合实例论述了FDM在制造业中的应用特点和良好的发展前景. 相似文献
5.
本文介绍了以微机和仪表控制的远红外烘烤系统的软、硬件结构、实现环境和方法.着重介绍了微机控制部分的结构和特点。并简要介绍了该系统的特点和用途 相似文献
6.
7.
民用航空发动机核心机技术发展研究 总被引:1,自引:1,他引:1
民用发动机的发展历史显示,在先进核心机基础上发展系列发动机是民用发动机发展最突出的一个技术特点。本文分析和总结了在核心机基础上进行系列发动机发展的主要技术方法和特点,阐述了现代高性能发动机的技术特点和关键技术。根据民机发动机发展规律和我国国情,提出了我国民用发动机发展的几点建议。 相似文献
8.
介绍了第三代战斗机发动机的设计特点和研制规律;综述了F119和F135等第四代战斗机发动机的研制现状,总结了其性能和结构特点;归纳了战斗机发动机性能、结构和材料的发展趋势;展望了未来战斗机发动机的发展。 相似文献
9.
10.
11.
《中国航空学报》2016,(2):403-410
An integrated design concept for crashworthy fuselage using sine-wave beam and strut is proposed and investigated. The finite element model of aircraft fuselage is built first. The structures above cabin floor, occupant and seat are simplified as two rigid blocks. The fuselage frame is redesigned, and the sine-wave beam is arranged under the frame. The impact dynamic performance of the aircraft with bottom sine-wave beam structure is studied and compared with that of conventional type. To obtain better crashworthiness performance, different rigidity of strut is combined with the sine-wave beam bottom structure. Numerical simulation result shows that the proposed sine-wave beam bottom structure could not only dissipate more proportion of impact kinetic energy but also reduce the initial peak acceleration. The structure and rigidity of strut have great influence on the crashworthiness performance. To give a better fuselage structure, both of the strut and bottom structure should be properly integrated and designed. 相似文献
12.
从较为成熟的软件无线电技术出发,介绍了软件雷达的基本概念、通用结构、通用信号处理平台和适用于软件雷达的数据结构,总结了软件雷达的优越性能和发展趋势。 相似文献
13.
Simultaneous optimization of structure together with attached tuned mass dampers considering dynamic performance 总被引:1,自引:1,他引:0
Tuned Mass Dampers(TMDs) are often attached to a main structure to reduce vibration, and the TMDs’ positions are important to affect the structural dynamic performance. However, the TMDs’ positions and the material layout of the structure act on each other. This paper suggests a design optimization method by combining the topology optimization of the main structure and the layout of the attached TMDs under harmonic excitations. The main structure with the attached TMDs are modeled by the continu... 相似文献
14.
15.
泡沫铝是一种新型航天器防护材料,拥有良好的抵御空间碎片超高速撞击的特性。模仿泡沫金属的生产原理建立了泡沫金属细观结构几何模型,结合自编的光滑质点流体动力学(SPH)程序进行了超高速撞击数值模拟,研究了平均孔洞直径和孔隙率对填充泡沫铝结构防护性能的影响。结果表明平均孔洞直径对防护性能影响较大,总体而言平均孔洞直径越小则防护性能越好。孔隙率只在高速时才有较大影响,并且存在最优值。通过不同泡沫铝几何参数下碎片云特性的对比分析表明,使碎片云的法向动量越有效分散,结构的防护能力越强。 相似文献
16.
《中国航空学报》2022,35(12):336-356
In comparison to the traditional fixed-angle trajectory, the variable-angle trajectory has a greater design space. However, it is a challenge to determine which common design curve structure is the most effective for improving mechanical performance. This work explores the effects of various design curves such as fixed-angle curve, linear curve, arc curve, sine curve, Bezier curve, and cubic polynomial curve trajectories on mechanical performance of laminates, including vibration modal performance and buckling performance. Genetic algorithm and improved NSGA-II algorithm are then used to optimize various curve structures. The results are confirmed utilizing thermoplastic Carbon Fiber (CF)/Polyether-Ether-Ketone (PEEK) laminates made by robotic fiber placement experiments. The relationship model between different mechanical performance and curve design variables is established. The optimization of variable-angle structure with mechanical properties as input variables is achieved. Meanwhile, a full-process angle-variable laying software platform from trajectory planning (CAD), trajectory optimization to manufacturing (CAM) is developed for facilitating the fiber placement application. 相似文献
17.
分析了计算机系统设计思路与系统结构的发展趋势,进而对如何建立高性能的飞行参数记录系统结构进行了研究,并对采用这一结构模型的飞参系统的未来发展提出了几点看法。 相似文献
18.
Preforming process would change yarn angle and yarn orientation, its influence on the material properties and material orientations needs to be considered in the performance analysis.However, most current performance models fail to account for the preforming effect. An integrated performance model accounting for the impact of preforming has been developed. In this integrated model, part geometry, yarn angle and orientation after preforming of multiple prepreg layers are predicted by Finite Eleme... 相似文献
19.
20.
集中控制和综合显示技术在先进作战飞机航空电子系统中的应用日益广泛,综合显示处理机作为航空电子系统控制和管理的核心,其系统结构、可靠性及综合显示控制将是系统平台设计要解决的首要问题.本文介绍了一种机载综合显示处理机,根据航空电子系统功能需求及显示控制系统结构,进行了系统层次化结构设计,并对综合显示控制系统的系统显示控制、通信控制及模块化设计与实现技术进行了研究分析,最后给出合理的模块化设计与实现方案.航空电子系统综合试验、应用表明,综合显示处理机性能先进、可靠性高,并极大地改善和提高了航空电子系统的整体性能. 相似文献