共查询到19条相似文献,搜索用时 109 毫秒
1.
A transonic turbulent separation flow in a converging-diverging transonic diffuser was studied, when there existed a separation bubble on the top wall of the diffuser triggered by strong shock-wave-boundary-layer-interaction (SWBLI). To capture the essential behavior of this complex flow, the current study utilized an anisotropic turbulence model developed on the basis of a statistical partial average scheme. The first order moment of turbulent fluctuations, retained by a novel average scheme, and the turbulent length scale, can be determined from the momentum equations and mechanical energy equation of the fluctuation flow, respectively. The two physical quantities were readily used to construct the nonlinear anisotropic eddy viscosity tensor and to significantly improve the computational results. Comparisons between the computational results and experimental data were carried out for velocity profiles, pressure distribution, skin friction coefficient, Reynolds stress as well as streamline vectors distribution. Without using any empirical coefficients and wall functions, the numerical results were in good agreement with the available experimental data, further confirming that the nonlinear anisotropic eddy viscosity tensor is the decisive factor for the success of the computational results. 相似文献
2.
A study on turbulence transportation and modification of Spalart–Allmaras model for shock-wave/turbulent boundary layer interaction flow 总被引:1,自引:0,他引:1
It is of great significance to improve the accuracy of turbulence models in shock-wave/ boundary layer interaction flow. The relationship between the pressure gradient, as well as the shear layer, and the development of turbulent kinetic energy in impinging shock-wave/turbulent boundary layer interaction flow at Mach 2.25 is analyzed based on the data of direct numerical simulation(DNS). It is found that the turbulent kinetic energy is amplified by strong shear in the separation zone and the adverse pressure gradient near the separation point. The pressure gradient was non-dimensionalised with local density, velocity, and viscosity. Spalart–Allmaras(S–A) model is modified by introducing the non-dimensional pressure gradient into the production term of the eddy viscosity transportation equation. Simulation results show that the production and dissipation of eddy viscosity are strongly enhanced by the modification of S–A model. Compared with DNS and experimental data, the wall pressure and the wall skin friction coefficient as well as the velocity profile of the modified S–A model are obviously improved. Thus it can be concluded that the modification of S–A model with the pressure gradient can improve the predictive accuracy for simulating the shock-wave/turbulent boundary layer interaction. 相似文献
3.
ALGEBRAIC TURBULENCE MODEL WITH MEMORY FOR COMPUTATION OF 3-D TURBULENT BOUNDARY LAYERS WITH VALIDATION 总被引:1,自引:0,他引:1
Additional equations were found based on experiments for an algebraic turbulence model to improve the prediction of the behavior of three dimensional turbulent boundary layers by taking account of the effects of pressure gradient and the historical variation of eddy viscosity, so the model is with memory. Numerical calculation by solving boundary layer equations was carried.out for the five pressure driven three dimensional turbulent boundary layers developed on flat plates, swept-wing, and prolate spheroid in symmetrical plane. Comparing the computational results with the experimental data, it is obvious that the prediction will be more accurate if the proposed closure equations are used, especially for the turbulent shear stresses. 相似文献
4.
An isothermal numerical study of effusion cooling flow is conducted using a large eddy simulation(LES) approach.Two main types of cooling are considered,namely tangential film cooling and oblique patch effusion cooling.To represent tangential film cooling,a simplified model of a plane turbulent wall jet along a flat plate in quiescent surrounding fluid is considered.In contrast to a classic turbulent boundary layer flow,the plane turbulent wall jet possesses an outer free shear flow region,an inner near wall region and an interaction region,characterised by substantial levels of turbulent shear stress transport.These shear stress characteristics hold significant implications for RANS modelling,implications that also apply to more complex tangential film cooling flows with non-zero free stream velocities.The LES technique used in the current study provides a satisfactory overall prediction of the plane turbulent wall jet flow,including the initial transition region,and the characteristic separation of the zero turbulent shear stress and zero shear strain locations.Oblique effusion patch cooling is modelled using a staggered array of 12 rows of effusion holes,drilled at 30° to the flat plate surface.The effusion holes connect two channels separated by the flat plate.Specifically,these comprise of a channel representing the combustion chamber flow and a cooling air supply channel.A difference in pressure between the two channels forces air from the cooling supply side,through the effusion holes,and into the combustion chamber side.Air from successive effusion rows coalesces to form an aerodynamic film between the combustion chamber main flow and the flat plate.In practical applications,this film is used to separate the hot combustion gases from the combustion chamber liner.The numerical model is shown to be capable of accurately predicting the injection,penetration,downstream decay,and coalescence of the effusion jets.In addition,the numerical model captures entrainment of the combustion chamber mainstream flow towards the wall by the presence of the effusion jets.Two contra-rotating vortices,with axes of rotation along the stream-wise direction,are predicted as a result of this entrainment.The presence and characteristics of these vortices are in good agreement with previous published research. 相似文献
5.
The flow field in junction is complicated due to the ripple property of oil flow velocity and different frequencies of two pumps in aircraft. In this study, the flow fields of T-junction and Y-junction were analyzed using shear stress transport (SST) model in ANSYS/CFX software. The simulation results identified the variation rule of velocity peak in T-junction with different frequencies and phase-differences, meanwhile, the eddy and velocity shock existed in the corner of the T-junction, and the limit working state was obtained. Although the eddy disappeared in Y-junction, the velocity shock and pressure loss were still too big. To address these faults, an arc-junction was designed. Based on the flow fields of arc-junction, the eddy in the junction corner disappeared and the maximum of velocity peak declined compared to T-and Y-junction. Additionally, 8 series of arc-junction with different radiuses were tested to get the variation rule of velocity peak. Through the computation of the pressure loss of three junctions, the arc-junction had a lowest loss value, and its pressure loss reached the minimum value when the curvature radius is 35.42 mm, meanwhile, the velocity shock has decreased in a low phase. 相似文献
6.
Study on pressure wave propagation in two-phase flow in liquid oxygen feed pipe between pumps 下载免费PDF全文
A study on the character of pressure wave propagation was proposed for the gas liquid oxygen two-phase flow in the pipe between pumps.According to the practical working conditions,the homogenous model based on the compressibility theory regarding a single bubble in an infinite liquid,and Redlich-Kwong gas equation was derived a model for the low temperature and high pressure case,especially considering the change of the ratio of density of gas to one of liquid.The numerical tests were conducted.The results not only show the agreement between numerical simulation for this model and experiment at the normal temperature and pressure is good,but also show that the modifications of the model for the low temperature and high pressure condition are necessary.The study is of reference to further study of oscillation restrain and relative pipe tests. 相似文献
7.
An appropriate flow mode of electrolyte has a positive effect on process efficiency, surface roughness, and machining accuracy in the electrochemical machining(ECM) process. In this study, a new dynamic lateral flow mode, in which the electrolyte flows from the leading edge to the trailing edge, was proposed in trepanning ECM of a diffuser. Then a numerical model of the channel was set up and simulated by using computational fluid dynamics software. The result showed that the distribution of the flow field was comparatively uniform in the inter-electrode gap. Furthermore, a fixture was designed to realize this new flow mode and then corresponding experiments were carried out. The experimental results illustrated that the feeding rate of the cathode reached 2 mm/min, the best taper angle was about 0.4°, and the best surface roughness was up to Ra= 0.115 lm. It reflects that this flow mode is suitable and effective, and can also be applied to machining other complex structures in trepanning ECM. 相似文献
8.
To discover the characteristic of separated flows and mechanism of plasma flow control on a highly loaded compressor cascade, numerical investigation is conducted. The simulation method is validated by oil flow visualization and pressure distribution. The loss coefficients, streamline patterns, and topology structure as well as vortex structure are analyzed. Results show that the numbers of singular points increase and three pairs of additional singular points of topology structure on solid surface generate with the increase of angle of attack, and the total pressure loss increases greatly. There are several principal vortices inside the cascade passage. The pressure side leg of horse-shoe vortex coexists within a specific region together with passage vortex, but finally merges into the latter. Corner vortex exists independently and does not evolve from the suction side leg of horse-shoe vortex. One pair of radial coupling-vortex exists near blade trailing edge and becomes the main part of backflow on the suction surface. Passage vortex interacts with the concentrated shedding vortex and they evolve into a large-scale vortex rotating in the direction opposite to passage vortex. The singular points and separation lines represent the basic separation feature of cascade passage. Plasma actuation has better effect at low freestream velocity, and the relative reductions of pitch-averaged total pressure loss coefficient with different actuation layouts of five and two pairs of electrodes are up to 30.8% and 26.7% while the angle of attack is 2°. Plasma actuation changes the local topology structure, but does not change the number relation of singular points. One pair of additional singular point of topology structure generates with plasma actuation and one more reattachment line appears, both of which break the separation line on the suction surface. 相似文献
9.
Simulation on effect of throat contraction ratio and strake stagger angle on flow field and aerodynamic performance of scrampressor 下载免费PDF全文
The design methods of typical supersonic aircraft intakes and shock wave compression technology have been applied to ram-rotor, an attractive compression system. A ram-rotor is of a typical structure including the compression ramp, the throat and the subsonic diffuser; a scrampressor is similar to ram-rotor, the only difference is that scrampressor has no subsonic diffuser. The work was the continuation of the preparatory work. In order to further study the effect of throat contraction ratio and strake stagger angle on the flow field and performance of a scrampressor, the flow field of a scrampressor with a three-dimensional flow path was numerically simulated with different throat contraction ratios and strake stagger angles. Simulated results indicated that the optional aerodynamic performance of a scrampressor could be achieved with an adiabatic efficiency of 0.8413 a total pressure recovery coefficient of 0.8446, a total pressure ratio of 7.14 and a static pressure ratio of 5.17 for a throat contraction ratio of 0.6 and a strake stagger angle of 12°. It was therefore concluded that an appropriate decrease in throat contraction ratio and an increase in strake stagger angle could help the comprehensive improvement of a scrampressor in performance. 相似文献
10.
This article investigates the separated flow around the bent-nose biconic, in which the second ordered TVD(Total Variation Diminishing) method is applied. The governing cqua-tion is a thin layer Navier-Stokes equation. The surface pressure distribution at the leeward side is a little higher in the vicinity of the symmetrical plane. This seems to be caused by the development of the vortex at the leeward side due to the separated flow. The location of a separation line and the size are in very good agreement with the experiment. Also the secondary separation is captured very clearly. 相似文献
11.
本文用统一的Levy-Lees变换以及正算法与逆算法相结合,求解了超音速绕凹角湍流分离流动。 对附着流区用边界层正算法,压强分布用流过尖劈统一的高超音速与超音速公式,湍流模型取代数涡粘性模型;对凹角分离区用边界层逆算法,给定位移厚度δ~*分布,湍流模型取代数松弛模型;边界层计算采用Cebeci-Keller Box方法;计算成功地算得分离流场,较好地预估了分离点与重附点位置以及壁面压强分布与表面摩擦应力分布。 相似文献
12.
The results of analyzing the reliability of six turbulence models are presented as applied to calculations of flows in the
asymmetric plane diffuser. The influence of grid parameters upon the calculation results is studied and the accuracy of flow
separation and reattachment points prediction is determined. Also carried out is the comparison of processor time spent for
calculations with the aid of each model. 相似文献
13.
应用基于k-ωSST湍流模型的IDDES(Improved Delayed Detached Eddy Simulation)方法,就失速点附近翼型前缘典型双角状积冰导致的复杂分离流动进行了数值模拟研究.通过与风洞试验结果进行对比,表明对于此类分离流动问题,IDDES方法能够在壁面附近取得良好的速度预测结果,有效解析分离区域内的中小尺度湍流结构,较为准确地描述大尺度时均分离泡的再附位置和形态特征,适用于翼型结冰后复杂流动的精细分析.同时计算结果显示当此带冰翼型位于失速点附近时,角状冰后方脱落剪切层内部的旋涡不稳定析出和输运过程促进了外部流动与回流区域流动间的掺混,将导致流动发生非定常再附现象. 相似文献
14.
运用GAO-YONG可压缩湍流方程组,采用同位网格SIMPLE算法,对扩压器跨声速流动中的二维激波/湍流边界层干扰现象进行了数值模拟。将计算得到的流场的时均参数与实验值进行比较,数值模拟结果在激波强度、壁面压力分布以及分离点和再附点位置等方面,与实验值吻合较好,表明GAO-YONG可压缩湍流方程组能够比较准确的模拟较强激波/湍流边界层干扰流动,从而进一步为GAO-YONG湍流模型的正确性及其在可压缩流场模拟方面的适用性提供了佐证。 相似文献
15.
激波-边界层-分离流相互干扰三维湍流的数值模拟 总被引:1,自引:0,他引:1
本文采用数值方法求解时间相关三维可压缩雷诺平均Navier-Stokes方程组,模拟激波—边界层—分离流相互干扰三维湍流流动。湍流模型为Badwin-Lomax两层代数模型,改进后用于三维内流问题。采用单元中心有限体积法离散流场控制方程,VanLeer矢通量格式计算无粘通量,中心差分法计算粘性通量,LUSGS时间推进格式计算定常流场。本文以二元跨音速扩压器内三流动为算例,数值模拟较强激波—边界层—分离流相互干扰维湍流流动,并与实验结果进行了比较。数值模拟结果,在激波强度、分离点位置和再附点位置等方面,与实验结果吻合较好。 相似文献
16.
17.
追求高亚声速经济巡航的民机、跨声速高机动特性的战斗机对高性能跨声速风洞的需求日趋紧迫,开 展跨声速风洞高速段一体化数值模拟研究,对跨声速风洞设计具有一定的参考意义。通过非对称平板扩压器 算例,初步验证计算方法的可行性,并对跨声速风洞高速段进行计算收敛评判方法、不同初始条件和槽壁扩张 角等因素研究。结果表明:采用模型区前后两个监测点马赫数变化作为收敛判据,方法可行且模型区流场均 匀;不同初始化条件对收敛结果总体影响较小,特别是各截面流场分布和槽道流动方向上,两者结果基本相同; 跨声速状态槽壁扩张角0.3°得到的试验段模型区域流场品质较槽壁扩张角0.0°更均匀。 相似文献
18.