共查询到17条相似文献,搜索用时 125 毫秒
1.
提出了一种将柔性翼和刚性翼相结合的柔性-刚性混合翼微型飞行器新概念布局型式,通过与刚性翼微型飞行器的风洞对比试验研究了该新概念布局的气动特性。在此基础上,进行了柔性-刚性混合翼微型飞行器试验原理样机的飞行试验验证。风洞试验和飞行试验研究结果表明:柔性-刚性混合翼微型飞行器的新概念布局是可行的;与刚性翼微型飞行器相比而言,柔性-刚性混合翼微型飞行器具有更好的气动特性,对解决微型飞行器抗风稳定飞行问题是有效的。 相似文献
2.
固定翼微小型飞行器(MAV)飞行雷诺数低,属于低雷诺数空气动力学研究范畴.本文对不同尺寸的矩形翼、混合翼、梯形翼、齐默曼翼与反齐默曼翼平面布局MAV模型进行风洞测力试验.对比了各种平面布局气动特性,其中混合翼、反齐默曼翼和梯形翼较好地利用了前缘涡产生的涡升力,有良好的升力特性;展弦比较小的机翼表面脱体涡强度较大,改善了大迎角下的气动特性;大后掠角梯形翼有较好的过失速特性. 相似文献
3.
设计研制了一种飞翼布局的柔性翼和刚性翼微型飞行器,并在风洞中研究了两种微型飞行器在定常风和水平阵风作用下的气动特性,给出了柔性翼和刚性翼微型飞行器气动特性的差别。研究结果表明:不论是在定常风情况下,还是在水平阵风环境下,柔性翼的气动特性要优于刚性翼结构,柔性翼具有延迟失速和缓和阵风影响的能力,有利于稳定飞行。PIV测量结果表明:由于柔性翼的变形使刚性翼和柔性翼翼面上的流态不同,从而使微型飞行器的气动特性发生改变。 相似文献
4.
5.
6.
7.
8.
常规的仿鸟扑翼飞行器在飞行时机翼只是单纯地上下扑动。为提高扑翼飞行器横航向和航迹控制的品质,设计了一种机翼在扑动的同时可差动扭转的仿鸟扑翼飞行器;在低速风洞中对其进行了一系列测力试验,研究了可差动扭转扑翼飞行器的升力、推力特性,以及机翼差动扭转角、扑动频率、风速、机翼柔性对滚转力矩系数的影响;对设计的扑翼飞行器做了飞行试验,验证了设计的可行性,并与常规扑翼飞行器作了对比,试验结果表明:可差动扭转扑翼可以用于扑翼飞行器的横向控制,并且可以提高其抗风能力和航迹控制精度。 相似文献
9.
飞翼式微型飞行器飞行动力学特性研究 总被引:5,自引:0,他引:5
微型飞行器(MAV)非线性飞行力学特性研究是MAV设计中的一个重要环节。由于MAV具有自身尺寸微小,飞行速度低等特点,其空气动力学低雷诺数效应十分明显。飞翼式MAV的非常规气动布局也使得其飞行力学特性与常规飞行器有很大差异。以低雷诺数风洞实验为基础,研究了飞翼式MAV空气动力学特性,提出了1种针对飞翼式飞行器的动阻尼导数计算方法。在飞翼式MAV飞行速度范围内将其运动方程分段线性化以研究其飞行力学特性数值规律。结果表明,飞翼式MAV各项飞行品质指标与常规飞行器存在很大差异,在整个飞行范围内其飞行动力学特性呈非线性变化规律。本文的研究对实现飞翼式MAV自主飞行控制具有重要意义。 相似文献
10.
11.
柔性翼微型飞行器垂直阵风响应特性的实验研究 总被引:1,自引:0,他引:1
微型飞行器因其体积小、重量轻、使用灵活、成本低,广泛应用于军民领域的侦查、通讯、搜救等领域。在制约微型飞行器发展的诸多因素中,阵风对微型飞行器的稳定、安全飞行影响很大。在南京航空航天大学非定常风洞内,研制了一套垂直阵风装置,进行了垂直阵风的流场测试。设计制作了一种柔性翼微7型飞行器,并制作了刚性翼与其对比,在国内首次进行了微型飞行器垂直阵风实验。结果表明:柔性翼能够提高微型飞行器的失速迎角,且具有更好的纵向稳定性,有一定的垂直阵风缓和能力,有利于安全、稳定飞行。 相似文献
12.
为了研究不同柔度的柔性翼气动特性和抗风性性能,制作了九种不同柔段的柔性翼,利用西北工业大学微型飞行器专用风洞对其进行初步的风洞试验,在实验中进行了不同风速,不同迎角对柔段的气动特性研究。通过试验优选出气动特性较好的柔段,为柔性翼微型飞行器的总体设计和气动特性提供参考。 相似文献
13.
微型飞行器的设计原则和策略 总被引:2,自引:1,他引:1
为了探索微型飞行器(MAV)总体设计方法,在简要介绍微型飞行器的概念与技术难点的基础上,笔者根据多年的MAV研究和试验,提出了对微型飞行器设计原则的思考,阐述了研究性和实用性MAV以及固定翼、扑翼和旋翼等不同类型MAV的设计特点。通过MAV设计的矛盾与协调关系、设计方法和优化问题说明了MAV设计的特殊性。最后,展望了微型飞行器设计的发展方向,为微型飞行器总体设计研究提供了参考思路。 相似文献
14.
15.
The conceptual design and optimization of a tilt-rotor Micro Air Vehicle(MAV) for a well-defined mission are performed. The objective of this design cycle is to decrease the design time in order to efficiently create a functional tilt-rotor drone. A flight mission is firstly defined for a tiltrotor MAV performing hovering and cruise flight scenarios. Secondly, a complex wing shape is chosen and modeled in order to determine the final shape. The initial shape is scaled in order to acquire an arbitrary wingspan of one meter. For the specific area and wingspan, the aspect ratio of the designed wing shape is found to be equal to 2.32. Thirdly, a constraint analysis of the MAV is performed by using an energy balance analysis for six different flight scenarios. This analysis yields the required power loading and wing loading. Fourthly, the weight of the vehicle is estimated using both statistical and computational methods. After estimating the total weight and the wing loading of the MAV, the surface of the wing is determined, yielding a final wingspan of 0.76 m. Subsequently, considering the total weight of the designed MAV, the needed lift coefficient is determined.Fifthly, using the lift coefficient in conjunction with XLFR5, a batch of airfoils is selected and analyzed to evaluate the aerodynamic coefficients of the wing with each airfoil. This analysis ultimately leads to the optimum airfoil being selected. Finally, design of the fuselage and tail, internal components selection, and servo-mechanisms design are carried out prior to a stability analysis. All these proposed steps are needed to design efficient and functional tilt-rotor MAVs. 相似文献
16.
微型扑翼飞行器的气动建模分析与试验 总被引:7,自引:1,他引:6
用计算流体力学的数值模拟方法研究了微扑翼飞行器的扑翼飞行的非定常空气动力学问题。在对昆虫扑翼飞行运动的仿生模拟基础上 ,对实际可飞的微扑翼飞行器的扑翼运动建立了三维翼型的运动学与空气动力学模型。利用任意拉格朗日欧拉 ( ALE)有限元方法求解出 N-S方程的数值解 ,证明简单扑翼布局所提供的升力足以克服微扑翼飞行器本身的重力使其飞行。在此基础上 ,分别计算并分析了拍动幅值、俯仰幅度以及扑翼频率等各种扑翼参数对升力的影响。最后 ,探索性的扑翼风洞试验与飞行试验结果在一定程度上验证了文中计算方法的可行性 相似文献
17.
《中国航空学报》2020,33(1):88-101
Introducing flexibility into the design of a vertically flapping wing is an effective way to enhance its aerodynamic performance. As less previous studies on the aerodynamics of vertically flapping flexible wings focused on the lift generated in a wide range of angle of attack·a 2D numerical simulation of a purely plunging flexible airfoil is employed using a loose fluid–structure interaction method. The aerodynamics of a fully flexible airfoil are firstly studied with the flexibility and angle of attack. To verify whether an airfoil could get aerodynamic benefit from the change in structure, partially flexible airfoil with rigid leading edge and flexible trailing edge were further considered. Results show that flexibility could always reduce airfoil drag while lift and lift efficiency both peak at moderate flexibility. When freestream velocity is constant, lift is maximized at a high angle of attack about 40° while this optimal angle of attack reduces to 15° in drag-balanced status. The airfoil drag reduction, lift augmentation as well as efficiency enhancement mainly attribute to the passive pitching other than the camber deformation. Partially deformed airfoil with the longest length of moderate flexible trailing edge can achieve the highest lift. This study may provide some guidance in the wing design of Micro Air Vehicle (MAV). 相似文献