基于压缩感知的信源个数与信号参数估计算法

信源个数与信号参数估计是盲信号处理的关键环节，对后续信号的侦察处理意义重大。针对当前盲信号信源个数与信源参数估计研究割裂的问题，提出了一种联合估计算法。通过分析信号的稀疏系数在不同测量矩阵相同稀疏字典下位置相同的特点，提高了信源个数和信号参数的估计精度，实现算法的自适应控制；通过数理分析确定了多级搜索策略的最优级次，大大降低了稀疏字典的原子数目。仿真结果表明：算法在一定信噪比下能够实现信源个数和信号参数的有效估计；信源个数和信号参数的估计精度随着压缩比的降低而逐渐提高，随着信噪比的提高而逐步增强；噪声对信源个数和信号参数估计精度的影响很大，尤其是低信噪比下；第2个信源载波频率和调频斜率的估计误差明显高于第1个信源参数的估计误差。     

Range and Bearing Estimation in Passive Sonar

Passive sonar systems are used for estimating the range and bearing of signal sources, such as ships or submarines. In this study, the Cramer-Rao bounds on estimation errors are used as measures of the accuracy of the estimates. The bounds show how parameters such as observation time, signal bandwidth, signal-to-noise ratio, and array geometry can be chosen to obtain maximum accuracy. When the array geometry satisfies certain conditions, the bound for range estimate is shown to be independent of the actual source bearing and the bound for bearing estimate independent of both the range and bearing of the source. It is also shown that the same conditions on array geometry ensure that the range or bearing estimation accuracy is not degraded when tne other pammeter is not known.     

一种新颖的超高分辨率SAR频率域反投影成像算法

超高分辨率条件下,机载合成孔径雷达（SAR）发射信号带宽大,合成孔径时间比较长,对成像处理算法的精度和效率要求较高。现有近似频率域处理和时间域滤波反投影（FBP）算法聚焦SAR数据时均存在诸多问题。基于微局部分析方法,提出了一种新颖的频率域滤波反投影（FD-FBP）成像处理方案。首先,利用Keystone变换简化了数据距离多普勒（RD）域徙动表达式。然后,在RD域进行反投影操作,对参考位置处反投影数据进行移位、相位补偿和FFT等操作即可以得到图像,从而在保证算法精确性的前提下有效降低了运算效率,实现了频率域方法的高效率和时间域方法的精确性特点的结合。最后,点目标仿真和实测数据处理以及与FBP等算法的对比验证了该方法的有效性。     

数字域谱估计的GNSS系统信号带宽测试方法

针对传统的单载波扫频法不适于GNSS（全球导航卫星系统）信号生成通道的带宽测量的问题,提出了采用数字信号处理的信号带宽方法.对实际导航信号进行高速采样,在数字域对采样的导航信号和本地数字生成的理想导航信号进行频谱估计和计算,从而得到GNSS信号带宽.分别使用周期图法和Welch法谱估计,对提出的测试方法进行仿真.仿真结果表明,采用Welch法进行理想信号和实际信号谱估计,对谱估计后的结果进行计算,可以完成GNSS信号带宽精密测量,在Welch法估计参数设置合理的情况下,GNSS信号带宽估计的准确度可以达到99.9％以上.     

一种基于DFT的高精度载波频偏估计算法

针对无线数字通信中的载波频率同步问题,提出一种新的载波频偏估计算法。利用离散傅里叶变换（DFT）内插技术,在较大频偏范围内估计出载波频偏,并且在估计精度上相对于DFT法有了很大的提高。这种算法不需要增加DFT数据长度,适合突发通信方式。进行了Monte Carlo仿真实验,仿真结果表明新算法不仅具有宽的估计范围,还具有高的估计精度。     

一种基于短时机动试飞数据的动力学辨识优化方法

飞行动力学辨识算法的一个关键问题是,如何通过简单的机动获取所关心频率范围的响应特性。短时倍脉冲是一种易于实施的激励信号,兼顾试飞安全性与经济性,但与频域辨识法通常使用的扫频输入激励相比,短时机动频谱范围窄、信噪比低,一般难以得到准确的辨识结果。对如何基于短时机动飞行试验数据,提高辨识结果准确性的问题进行了研究。首先分析了经典Welch谱估计进行时域-频域转换过程中,影响非参数模型辨识精度的主要因素,提出了削减窗函数边缘缩减效应的数据预处理方法,并结合多窗口综合技术,提高频域特性辨识结果的精度。在参数化模型辨识过程中,针对有限频谱范围,提出了利用相干函数和功率谱密度加权综合,确定等效拟配的频率范围和频率节点的自适应方法,使得低阶等效拟配与输入激励信号高度相关,提高参数化模型辨识的精度、一致性和适应性。通过不同类型飞机的大量短时机动和少量扫频飞行试验数据模型辨识的工程应用示例,验证了动力学辨识优化方法算法稳定、结果准确,可满足飞行品质模态特性评价等应用需求。     

DS/FH混合扩频测速技术研究

由于DS/FH混合扩频信号带宽较宽,传输信道难以保证信号在宽带条件下线性传输,信号会发生群时延畸变,导致载波相位不再连续,影响载波的稳定跟踪,从而使测速精度降低。本文提出了基于跳频图案同步辅助的鉴频方案,可以消除相位跳变对载波跟踪的影响,实现对扩跳信号载波的稳定跟踪,从而提高DS/FH混合扩频测速的精度。     

Doppler ambiguity resolution using multiple PRF

An algorithm for velocity ambiguity resolution in coherent pulsed Doppler radar using multiple pulse repetition frequencies (PRF) is presented. It relies on the choice of particular values for the PRFs. The folded frequency of the target signal is obtained by averaging the folded frequency estimates for each PRF, and a quasi maximum likelihood criterion is maximized for ambiguity order estimation. The fast implementation of this nonambiguous estimation procedure is based on the fast Fourier transform (FFT), The proposed waveform allows full exploitation of any (even) number of PRFs, which appears to be important for estimation improvement. The effects of the waveform parameters and the folded frequency estimation variance on the performance of the ambiguity order estimation procedure are evaluated theoretically and through computer simulations. Mean square error (MSE) curves are given to assess the Doppler frequency estimation accuracy. Finally, the new method is compared with a classical technique and the implementation of the algorithm in a clutter environment is addressed.     

基于稀疏表示和近似(e)0范数约束的宽带信号DOA估计

针对宽带信号的波达方向(DOA)估计问题,在稀疏框架下提出一种近似(e)0范数约束的宽带信号DOA估计新算法.首先对宽带信号进行预处理,得到同一参考频率点下的接收数据,然后对其协方差矩阵元素进行加和平均运算,得到一个低维的观测向量,并在稀疏框架下进行稀疏表示,最后利用截断(e)1函数设定权值,构造逼近(e)0范数约束的稀疏重构方法,进而重构信号,获得宽带信号的DOA估计.仿真结果表明,相比于传统的宽带信号DOA估计算法,所提算法具有更高的分辨率和估计精度.     

基于压缩感知的嵌套FDA 雷达距离- 角度联合估计

针对频率分集技术，与非均匀阵列、压缩感知理论相结合，实现目标距离- 角度的联合估计。通过 频率分集技术提高信号空间自由度，将距离参数引入导向矢量矩阵，实现距离- 角度参数的联合。并结合嵌套 阵列，显著提高雷达阵列孔径。该方法针对嵌套阵虚拟阵列流型矩阵的优化过程导致的秩亏缺问题，传统的空 间平滑算法会以牺牲部分阵列孔径为代价将单快拍问题转化为多快拍问题，采用正交匹配追踪算法可以实现单 快拍下的高精度参数估计，避免了空间平滑技术对阵列孔径的影响。并通过压缩感知理论的应用降低信号维度， 减小了计算复杂度。     

基于自适应陷波滤波器的伺服系统谐振频率估计及抑制

在使用陷波滤波器抑制伺服系统机械谐振时,需要获取准确的机械谐振频率。为了快速检测出谐振频率,提出了一种基于自适应陷波滤波器(ANF)的机械谐振频率估计算法,通过速度误差信号分析,实现谐振频率在线快速辨识。首先,建立柔性连接伺服系统模型；然后,对ANF频率估计算法进行分析,并且与常用的快速傅里叶变换(FFT)频率检测算法的分析精度和计算速度进行对比。数值比较和仿真验证表明,ANF频率估计算法可以更快地实现谐振频率的精确检测。最后搭建试验平台,以ANF频率估计的结果作为陷波器的中心频率,成功实现了电机转速振荡的抑制,验证了该方法的有效性。     

A Logarithmic Frequency Allocation Algorithm for Wideband Discrete Frequency Pulse Trains

It is shown that signal waveforms utilizing discrete frequency modulation (DFM) which are generated using a narrowband or frequency shift algorithm have ambiguity sidelobe distortion which is caused by the approximation of time compression by frequency shift. A logarithmic frequency allocation algorithm is presented which couches the signal design problem in terms of band and step ratios, rather than in terms of bandwidth and frequency steps, and is consistent with the wideband formulation of the ambiguity function. The algorithm makes use of the same basic code generating sequence used for narrowband frequency allocation, but the resulting signal will have invariant ambiguity sidelobe positions for any receiver realization in the delay-time compression plane.     

On the Accuracy And Resolution of Radar Signals

Information matrices are derived for estimates of the range parameters of moving targets as obtained by combining a priori information (if available) with reflected radar signals observed in the presence of additive white Gaussian noise. The inverse of the information matrix provides a lower bound on the covariance matrix of any unbiased parameter estimates. This bound can be approached with a high signal-to-noise ratio and optimum data processing (matched filters). Arbitrary frequency modulation, amplitude modulation, and target motion as well as various assumptions on processing the RF phase are considered. The multiple-target case makes possible investigation of a signal's resolution ability, as well as its accuracy potentials. Results for a carrier frequency much greater than the effective signal bandwidth are obtained as a special case. A main purpose of the paper is the reduction of the original radar problem to a linear model which is equivalent in the sense of having the same information matrix. These models provide valuable insight into the relative effects of multiple targets, choice of modulation, a priori information, and assumptions regarding RF phase and bandwidth. The linear equivalent model also leads to a valuable computational algorithm for investigations using digital or hybrid computers. The various special cases of interest are obtained by simple modifications of the general case, and thus the algorithm can provide a very versatile tool for evaluating and designing radar signals.     

相关法测量中的噪声信号源和扫频信号源的性能比较

时差法相关测量中信号的带宽越宽，互相关函数的峰值点的峰值优势越大，其测量的抗干扰性能越好。通过理论分析和数学仿真研究了两种宽带信号源——噪声信号和扫频信号，并利用相关分析法测量两信号问时差时的性能。结论是：噪声信号频带范围宽，带宽不受所采用信号长短的限制，测量分辨力高，但其频谱与噪声干扰频谱相似，抗干扰能力差；扫频信号的频率和带宽可人为控制，频谱特征明显，抗干扰性能好。     

基于WVD的调频引信瞬时频率估计算法

针对传统的调频引信无法进行连续测距的问题,利用时频分析的方法,研究了引信差频信号瞬时频率估计算法.基于Wigner-Ville分布,分析了WVD最大值法、SPWVD最大值法及Viterhi-SPWVD算法用于提取信号瞬时频率的特点,通过Monte Carlor仿真试验,比较了几种算法的性能,给出了仿真结果.     

基于相位差分的雷达信号参数估计方法

由于接收信号长度有限而存在频率离散化采样的限制,FFT(Fast Fourier Transform,快速傅里叶变换)对雷达信号频率的估计精度会降低。基于相位差分的频率估计方法可以对这一偏差进行估计,从而减小FFT的估计误差。尝试将该方法应用于LFM(Linear Frequency Modulated,线性调频)信号带宽的估计问题,并对此进行了仿真验证,结果证明该方法对雷达信号频率和带宽估计有一定的应用价值。     

自适应的光纤布拉格光栅图像寻峰算法

根据实际光谱特征, 提出了自适应的光纤布拉格光栅图像寻峰算法。针对 不同环境物理场及噪声分布下的光栅谱型,该算法能自动检测光谱的带宽和信噪比,自 适应地调整算法的高斯模板带宽大小,提高谱型匹配及滤波效果,从而提高寻峰精度。 将该算法与高斯拟合法、质心法进行对比,分析了其在不同噪声大小及非均匀温度场分 布下光纤布拉格光栅反射光谱的寻峰精度。理论仿真及实际寻峰结果表明,该寻峰算法 具有较强的抗噪能力及谱型适应性,较质心法、高斯拟合法具有显著优势。     

Interception Algorithm of S-cubed Signal Model in Stealth Radar Equipment

Radar equipment of stealth platforms such as aircraft have adopted the newest modern technology to design the signal waveforms. One of the important and effective methods is the hybrid waveform called spread spectrum stretch (S-cubed) which combines linear frequency modulation (LFM) and discrete phase code. In order to investigate the function of enemy’s stealth radar equipment, the interception algorithm of S-cubed is needed. In this paper, a novel detection and parameter estimation approach for the reconnaissance S-cubed radar signal is presented. First, the generalized time-frequency representation of Zhao, Atlas, and Marks (ZAM-GTFR) and Hough transforms (HT) are applied to detecting the signal, and then the initial frequency and modulation slope of LFM are estimated from the ZAM-GTFR. On the basis of LFM information, the reconstructing signal is generated. Finally, the code rate of discrete phase code is extracted from the negative peaks of the ZAM-GTFR. Simulation results show that the proposed algorithm has higher estimation accuracy when the signal to noise ratio (SNR) is above 3 dB.     

短波段内多重信号分类算法的窄带假设分析

经典空间谱估计算法的两个适用假设是远场平面波和窄带信号。文章利用7单元均匀线列阵仿真分析了短波波段内多重信号分类（MUSIC）算法的窄带假设上限带宽。可以发现：对于短波信号,50kHz的带宽所带来的测向误差不超过O．08°。这就意味着,对于短波通信信号的侦察测向完全可以采用经典空间谱估计算法,比如MUSIC算法,而不需要为窄带假设来付出代价,这便为设计高精度的短波通信实时测向系统提供了条件。