首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
针对海上电磁环境复杂、数据量巨大等问题,在进行态势分析时,将目标海域内对态势分析影响较小的固定目标进行清洗,可有效缩短数据处理的时间、降低复杂度,提高态势分析的效率和直观性。现有的固定目标清洗方法鲁棒性较低,不能排除异常跳变数据的干扰,对数据集中信息的准确性要求较高,不适用于海上复杂环境的数据处理。因此,文章提出了一种基于循环阈值的海上固定目标清洗方法,并在仿真军事场景上进行了实验分析,所提方法通过循环阈值过程能够排除自然因素、量测误差和异常跳变数据的干扰,有效检测出样本数据集中的固定目标。  相似文献   

2.
采用单横模(TEM01)和多模横向激励高气压(TEA)脉冲二氧化碳激光器和不同焦距的透镜对10.6μm的增透膜进行了破坏实验,对破坏样品进行了显微分析,研究了不同激光模式和不同焦距透镜对薄膜破坏的影响。实验结果表明,在短焦距透镜聚焦时,相同能量密度的单横模激光脉冲焦距前比焦距后更容易造成薄膜的损伤,破坏阈值相差5 J/cm2;使用长焦距透镜聚焦时,在单模激光脉冲和多模激光脉冲幅照下薄膜的损伤阈值基本相同,但比使用短焦距单模激光测量到的损伤阈值高。  相似文献   

3.
光学基片表面软质抛光胶体粒子的激光清洗   总被引:1,自引:0,他引:1  
介绍了光学基片表面软质抛光胶体粒子激光清洗的基本方法、原理和实验装置,并通过对含有污染微粒的基片表面进行激光清洗,获得了高洁净表面的光学基片.  相似文献   

4.
为解决空间推进系统直属组件轻量化需求,对新采用的铝合金材料进行了激光焊阈值特性研究。结果表明,铝合金激光焊阈值区间与焊接速度和离焦量的绝对值正相关,但正向变化幅度远低于不锈钢、镍合金和钛合金等材料。对于光束质量不同的激光焊机来说,光束的焦斑直径越小,实焦焊时阈值区间越低;光束的发散角越小,相同离焦量下阈值区间越低。在-12°~12°内,铝合金激光焊阈值区间与入射角无关。保护气的吹送方向和吹送速度基本不改变铝合金激光焊的阈值区间,此特性与不锈钢等材料略有区别。  相似文献   

5.
简要介绍了激光陀螺闭锁阈值的产生及测试原理,通过对传统激光陀螺闭锁阈值测试系统的分析,给出了基于虚拟仪器的闭锁阈值测试方案.经过实际测试,新的闭锁阈值测试系统可实现自动化测试,测试时间由原来的十几分钟缩短为20 s,测试误差小于10 Hz.  相似文献   

6.
从激光分离膜的热损伤原理出发,建立了1064nm波长激光分离膜的损伤方程,并给出了损伤阈值的求解过程,在理论上分析了1064nm波长激光对SiO2薄膜材料的损伤特性;文中运用仿真方法得出激光照射过陧中薄膜内温度场随杂质位置不同的分布曲线。  相似文献   

7.
激光表面清除处理及应用   总被引:2,自引:0,他引:2  
叙述了激光清除处理技术的特点及系统装置,较具体地介绍了国外采用激光除去漆层、锈蚀层、绝缘材料和基片表面外来微粒的研究情况以及作者所进行的光学元件超光滑表面的激光辅助清洗试验研究。  相似文献   

8.
介绍了激光清洗技术的原理和方法,并展望了激光清洗技术在空间领域,海洋船舶甚至日常工作中的应用前景.  相似文献   

9.
介绍了超光滑表面清洗的基本理论,指出了当前超光滑表面清洗中存在的问题,系统分析了现有清洗技术的原理和清洗效果,并指出清洗技术的发展趋势。  相似文献   

10.
为了有效提高激光强度图像的质量,使其能够更好地与其他多源图像匹配,提出了一种激光强度图像与距离图像融合的方法.该方法首先分析了激光强度图像与距离图像不同类型像素点之间局部统计信息的差异,然后利用Ostu算法和模糊最小误差阈值算法求出强度像和距离像的局部统计信息的全局阈值和最佳阈值,最后将这些阈值作为融合参数,按照一定的融合规则,将强度像与距离像进行融合.仿真实验表明:与单纯的滤波算法相比,该融合算法在控制激光散斑噪声的同时,通过融合不同源图像的互补信息,达到提高激光强度图像的各方面性能的目的.  相似文献   

11.
The phase-locked loop behavior is analyzed following the quasilinearization Booton's method. When the loop is locked on an unmodulated input signal with a static phase error, the phase detector nonlinearity produces an interaction between the static phase error and the voltage-controlled-oscillator (VCO) noise phase fluctuations. Formulas allowing one to compute the static phase error increase and the VCO phase variance increase are derived. When the input signal is phase modulated, there is an interaction between the static phase error, the VCO noise phase fluctuations, and the input signal phase modulation. Formulas are obtained that allow one to compute the loop loss of performances (static phase error increase and VCO phase variance increase) and the coherent phase demodulator output signal-to-noise ratio decrease. Finally, a slight modification to Booton's procedure is proposed, leading to results in better agreement with experimental data.  相似文献   

12.
门限签名是现代电子商务一种重要的数字签名。利用基于椭圆曲线上的双线性对函数,减少了计算量;利用Shamir秘密共享技术共享一个用户的私钥,而不是共享密钥生成中心的主密钥,提高方案的安全性。利用Gennaro可模拟的思想,证明了提出的方案具有健壮性和不可伪造性,因此是安全的。与传统的方案相比,新方案具有更高的计算效率。  相似文献   

13.
This paper is primarily an investigaton of a second-order phased-locked loop in the threshold region, with the loop filter chosen as (1/1+?s) or (1+?1s/1+?s). First-order loop results are also given. Effects of loop parameters, detuning error, and modulation are studied. It is shown that the loop with filter (1+?1s/1+?s) can be built two ways with same bandwidth and damping. One loop gives much better threshold than the other. The analytical results are supported by computer simulation as well as experimental work obtained by hardware simulation of the loop.  相似文献   

14.
疲劳损伤阀值研究   总被引:1,自引:0,他引:1  
杜洪增  田秀云  周煊 《航空学报》2003,24(3):223-225
 提出了一种新的疲劳损伤阀值,它是一个随机变量。疲劳寿命在一定显著水平下服从对数正态分布,由此可以证明疲劳损伤阀值服从正态分布。另外,通过统计检验,验证线性累积损伤也服从正态分布。因此,新定义的疲劳损伤阀值与线性累积损伤之间在分布形态上是一致的。还给出了带有可靠度和置信度的疲劳损伤阀值。  相似文献   

15.
Detection Performance of a Mean-Level Threshold   总被引:1,自引:0,他引:1  
The problem of detecting signals in nonstationary clutter is met by presenting a mean-level or adaptive threshold which adjusts to the changing background level. Such a threshold performs better than a fixed threshold that must be set for the highest amplitude clutter. However, the mean-level threshold does not perform as well for stationary noise as a fixed threshold set at the proper value. One measure of effectiveness of an adaptive threshold is its performance in stationary noise (compared to the optimum fixed threshold) for a specified speed of response. For the mean-level threshold, a simple mathematical solution is found for the detection probability when the noise is stationary and the signal scintillates rapidly. The performance is evaluated for a wide range of mean-level-threshold time constants and for several false-alarm probabilities. The results are presented graphically. As an example, the mean-level threshold suffers 3 dB in detectability (equivalent signal-to-noise ratio) in the presence of stationary noise as compared to the optimum fixed threshold for 50-percent probability of detection, false-alarm probability of 10-8, and an adjustment time of 15 times the signal duration.  相似文献   

16.
The threshold performance of a pulse position modulation (PPM) telemetry system which uses a slicer for a detector, suboptimum technique, is investigated, and curves for predicting the occurrence of threshold are developed.  相似文献   

17.
This correspondence considers the response of the PLL near threshold to an input consisting of a modulated carrier and white, Gaussian noise. For high input signal-to-noise power ratios ?, the output noise power is Gaussian with a parabolic spectrum. As ? is decreased, the PLL tends to lose lock which gives rise to impulses or ?spikes? in the output with a resulting white power spectrum. The additional output noise due to these ?spikes? causes a threshold in the output signal-to-noise ratio. Unfortunately the loss of lock rate in the PLL depends on the modulation as well as the noise power. A semiempirical approximate expression for the loss of lock rate as a function of the noise and sinusoidal frequency modulation is presented and is used to determine the optimum design procedure for PLL's to demodulate FM signals of varying modulation indexes, ?.  相似文献   

18.
An improved method for frame synchronization of PCM telemetered data is described and performance analyses are presented. This method is based on the utilization of a threshold detector whose level is selfvarying according to the characteristics of the received data. It is simple to implement and simpler from an operational point of view than the frame synchronizers currently in use in that a threshold control is altogether eliminated. Analyses show, furthermore, that a synchronizer using a self-varying threshold always has a higher probability of detecting the synchronization code no matter what the frame length, sync code length, or error level.  相似文献   

19.
In this paper the dependence of the threshold CNR of a simple phaselocked demodulator on the frequency deviation of an FM signal has been evaluated by the concept of quasi-stationary approximation. Experimental findings have been presented in support of the theoretical conclusion.  相似文献   

20.
In automatic detection in radar systems an estimate of background clutter power is used to set the detection threshold. Usually detection cells surrounding the cell under test for the presence of a target are used to estimate the clutter power. In the research reported herein, the target location is taken to be uncertain and thus returns from a target could corrupt this clutter power estimate. It is shown how the threshold should be varied to compensate for the resulting degradation in detection performance. The threshold control procedure is based on a priori information about target location that could be supplied by the radar's tracking system. In addition, a simple procedure for calculating detection and false alarm probabilities for Swerling II target models is presented.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号