The Counting Phase Detector with VLF Atmospheric Noise

The counting detector offers a simple means of making and averaging digital measurements of signal phase. However, use of the averages can lead to erroneous estimates if the signal has a low carrier-to-noise ratio. How to overcome this problem by using multiple counters is shown here. Characteristics for both Gaussian and impulsive noise are derived, and algorithms for estimating both phase and carrier-to-noise ratio are presented.     

Digital Communication Systems in Impulsive Atmospheric Radio Noise

Analyses are presented of the performance of binary and M-ary coherent and noncoherent communication systems operating in the impulsive atmospheric radio noise environment. The receiver is usually a maximum likelihood detector for white Gaussian interference and therefore has the form of a parallel bank of matched filters followed by decision circuitry. By employing a Poisson or generalized Shot noise model for the impulsive noise with a suitable probability density function (pdf), closed-form expressions and bounds of error probabilities for M-ary noncoherent and coherent amplitude-shift keying (ASK), phase-shift keying (PSK), and frequency-shift keying (FSK) systems are obtained and the results discussed.     

A mean level adaptive detector using nonconcurrent data

Convergence results for a mean level adaptive detector (MLAD) are presented. The MLAD consists of an adaptive matched filter (for spatially correlated inputs) followed by a mean level detector (MLD). The optimal weights of the adaptive matched filter are estimated from one batch of data and applied to a statistically independent batch of nonconcurrent data. The threshold of the MLD is determined from the resultant data. Thereafter a candidate cell is compared against this threshold. Probabilities of false alarm and detection are derived as a function of the threshold factor, the order of the matched filter, the number of independent samples per channel used to calculate the adaptive matched filter weights, the number of samples used to set the MLD threshold, and the output signal-to-noise power ratio of the optimal matched filter. A number of performance curves are shown and discussed     

A variably trimmed mean CFAR radar detector

A variably trimmed mean (VTM) constant false alarm rate (CFAR) detector in which the threshold is determined by processing a linear combination of a group of ordered samples in each window is introduced. Unlike the trimmed mean detector, the number of ordered samples that require further processing is allowed to vary according to a data-dependent rule. It is demonstrated that the VTM detector exhibits performance characteristics that are independent of the total (stationary) noise power. Simulated performance results are presented for regions of clutter power transitions and for multiple target environments to illustrate the possible improvement over the order-statistic detector that can be obtained by using a VTM detector     

PAM approach to weak CPM and its application to flight termination receivers

A method for computing the PAM representation for weak continuous phase modulation (CPM) is presented and applied to the modulation defined in the enhanced flight termination system (EFTS) standard. The pulse-amplitude modulation (PAM) representation was used to formulate a reduced-complexity detector whose performance is within 0.7 dB of maximum likelihood detection and 5.6 dB better than limiter-discriminator detection in the additive white Gaussian noise (AWGN) environment. The complexity of the reduced-complexity detector is less than 25% that of the maximum likelihood detector but, unlike the limiter-discriminator detector, requires a carrier phase PLL. In the presence of phase noise, the reduced-complexity detector outperforms limiter-discriminator detection when the RMS frequency deviation due to phase noise is less than 10% of the bit rate.     

Modified Generalized Sign Test Processor for 2-D Radar

The modified generalized sign test processor is a nonparametric, adaptive detector for 2-D search radars. The detector ranks a sample under test with its neighboring samples and integrates (on a pulse-to-pulse basis) the ranks with a two-pole filter. A target is declared when the integrated output exceeds two thresholds. The first threshold is fixed and yields a 10-6 probability of false alarm when the neighboring samples are independent and identically distributed. The second threshold is adaptive and maintains a low false-alarm rate when the integrated neighboring samples are correlated and when there are nonhomogeneities, such as extraneous targets, in the neighboring cells. Using Monte Carlo techniques, probability of false-alarm results, probability of detection curves, and angular accuracy curves have been generated for this detector. The detector was built and PPI photographs are used to indicate the detector's performance when the radar is operated over land clutter.     

Performance of MAX family of order-statistic CFAR detectors

The MAX family of constant-false-alarm-rate (CFAR) detectors is introduced as a generalization of the greatest of CFAR (GO-CFAR) or MX mean-level detector (MX-MLD). Members of the MAX family use local estimators based on order statistics and generate both a near-range and a far-range noise-level estimate. Local estimates are always combined through a maximum operation; this insures false-alarm control at clutter edges. At the same time, order-statistic-based estimators result in a high-resolution detector. A complete detection analysis is provided for SWII targets and a reference channel contaminated by large outliers. Results are presented for the MX censored MLD (MX-CMLD) operating in clutter. The MX order statistic detector (MX-OSD) based on only a single-order statistic per window, is analyzed, and curves showing the required threshold, CFAR loss, optimum censoring point, and signal-to-noise ratio (SNR) loss in the presence of outliers are given. Simulations are used to compare the dynamic responses of various MX-OSD detectors in a clutter and a multiple-target environment     

On the performance of polarimetric target detection algorithms

The performance of six polarimetric target detection algorithms is analyzed. The detection performance of the optimal polarimetric detector (OPD), the identity-likelihood-ratio-test (ILRT), the polarimetric whitening filter (PWF), the single-polarimetric channel detector, the span detector, and the power maximization synthesis (PMS) detector is compared. Results are presented for both probabilistic and deterministic targets in the presence of complex Gaussian clutter. The results indicate that the PWF and the ILRT typically achieve near optimal performance. The remaining detection algorithms typically yield performance that is degraded compared to the performance of the OPD, the PWF, and the ILRT     

Performance Analysis of the Censored Mean-Level Detector

The censored mean-level detector (CMLD) is an alternative to the mean-level detector that achieves robust detection performance in a multiple-target environment by censoring several of the largest samples of the maximum likelihood estimate of the background noise level. Here we derive exact expressions for the probability of detection of the CMLD in a multiple-target environment when a fixed number of Swerling II targets are present. The primary target is modeled by Swerling case II, and only single-pulse processing is analyzed. Optimization of the CMLD parameters is considered, and a comparison to other detectors is presented.     

Nonparametric rank detectors under K-distributed clutter in radar applications

This correspondence deals with a comparative analysis of parametric detectors versus rank ones for radar applications, under K-distributed clutter and nonfluctuating and Swerling II target models. We show that the locally optimum detectors (LODs) (optimum for very low signal-to-clutter ratio (SCR)) under K-distributed clutter are not practical detectors; on the contrary, asymptotically optimum detectors (optimum for high SCR) are the practical ones. The performance analysis of the parametric log-detector and the nonparametric (linear rank) detector is carried out for independent and identically distributed (IID) clutter samples, correlated clutter samples, and nonhomogeneous clutter samples. Some results of Monte Carlo simulations for detection probability (P/sub d/) versus SCR are presented in curves for different detector parameter values.     

CFAR integration processors in randomly arriving impulseinterference

Time diversity transmission is often used to circumvent the high probability of a deep fade on a single transmission which may result in loss of the signal. One way to combat deep fades is to postdetection integrate the received observations from each range resolution cell. The false alarm rate of the postdetection integrator (PI) is extremely sensitive to randomly arriving impulse interference. Such interfering pulses may be unintentionally generated by nearby radars or intentionally generated by pulse jammers seeking to destroy the visibility of the radar. The binary integrator (PI) which uses an M-out-of-L decision rule is insensitive to at most M-1 interfering pulses. We consider the adaptive implementation of the PI and BI detectors for constant false alarm rate (CFAR) operation. We show that the CFAR BI detector when the “AND” (L-out-of-L) decision rule is used exhibits more robust false alarm control properties in the presence of impulse interference at the expense of severe detection loss when no interference is present. The CFAR adaptive PI (API) detector is proposed to alleviate this problem. The CFAR API detector implements an adaptive censoring algorithm which determines and censors with high probability the interference samples thereby achieving robust false alarm control in the presence of interference and optimum detection performance in the absence of interference     

Data Quantization for Narrowband Signal Detection

In automatic radar detection, digital integration of the envelope detector outputs is often used as a good approximation to the optimum. This requires quantizing the envelope detector outputs. In this paper, quantizer structures for narrowband signal detection are considered. Quantizer characteristics are derived to optimize performance as measured by the detector efficacy?an asymptotic performance measure. Asymptotic and finite sample performance results are presented. The results obtained are not limited in their application to Gaussian noise only, although this important case is given specific consideration.     

Experimental studies of the impulsive ultrasonic machining by a tool with an intermediate striker

Some experimental data on the process of impulsive ultrasonic machining are presented. Also given are the data on variations in the impulsive vibration frequency of a workpiece and a tool.     

Numerical Results on the Convergence of Relative Efficiencies

This paper considers the detection of a known constant signal in an additive non-Gaussian noise under the assumptions of discrete time and statistically independent noise samples. The objective is to determine how large sample size must be before the easily computed asymptotic relative efficiency becomes a valid measure of performance. The exact small-sample error probabilities are calculated for a Neyman-Pearson optimal nonlinear detector consisting of a zeromemory nonlinearity followed by summation and threshold comparison. "Large-tailed" noise having a double exponential distribution is used as an example. The exact distribution of the test statistics for a linear detector and for the Neyman-Pearson optimal detector are calculated. Then the relative efficiency of the Neyman-Pearson optimal detector, as compared to a linear detector, is computed in order to study the rate of approach of the relative efficiency to its asymptotic value.     

Modified Savage and Modified Rank Squared Nonparametric Detectors

A modified form of the basic Savage statistic is considered and the performance of a modified Savage (MS) nonparametric detector using this modified statistic is derived. Also, a detector using a modified rank squared statistic (MRS) is introduced. The asymptotic relative efficiency (ARE) of the detectors is determined for chisquare, Rician, and log-normal signal fluctuations when the background noise is assumed Gaussian. The ARE performance of the generalized sign (GS) and Mann-Whitney (MW) detectors is also determined for these families of fluctuations. The ARE performance of the various detectors is then compared, and the results of a computer simulation are presented in which, for a finite number of samples, the performance of the modified detectors is compared with the performance of the GS and MW detectors. It is shown that when using a large number of reference noise samples, the ARE of the GS and MW detectors, the MRS and RS detectors, and the MS and Savage detectors are 0.75, 0.868, and 1, respectively. It is also shown that when using a finite number of reference noise samples the MS and MRS detectors can give a superior performance to that obtained with the MW detector, and that this is particularly true in the cases in which the degree of signal fluctuation is high.     

Orbital rendezvous using two-step sliding mode control

The problem of spacecraft rendezvous is studied, using sliding mode control in the presence of the earth's gravitational perturbation. The impulsive solution of Lambert's problem is obtained using the combined equations method to minimize total ΔV via an iterative method, and it is used as the desired trajectory for the rendezvous. In this paper, a two-step sliding mode control method is introduced for solving the rendezvous problem with finite-thrust including unmodeled dynamics.The thrust-coast-thrust type control laws for the system to follow the desired trajectories are represented and resultant trajectories are close enough to the Lambert's orbit with comparable amount of ΔV to the Lambert's impulsive solution. All state variables matched the final boundary conditions reasonably well at the end of maneuver.     

中值滤波方法在燃气涡轮传感器数据校正中的应用研究

分析了发动机测量信号滤波需求,设计了针对传感器数据校正的中值滤波器和快速算法,给出了模拟发动机故障和变工况试验情况下的传感器输出,给出了滤波比较研究结果。数值实验和实际应用于涡轮试验测量数据滤波的结果表明,中值滤波器对于脉冲噪声可以完全剔除,对随机噪声也具有较好的抑制效果,并能够较好保持信号中的陡峭边沿等趋势成份。      

Limiting Performance of Generalized Sign Test Detector

The limiting performance of the generalized sign test detector as the number M of target returns becomes infinite has been derived by Hansen and Olsen [1]. Simple expressions are derived herein for the limiting performance for finite M as K, the number of noise samples in the reference set, becomes infinite. Curves are presented which indicate how this limiting performance is approached as K is increased for both constant target returns and fluctuating target returns.     

低信噪比情况下识别模态参数的时域平均方法

 <正> 1.引官 模态参数识别方法在应用中需要解决的一个重要问题是观测噪声的干扰问题。为了有效地抑制观测噪声的影响,各种时域参数识别方法普遍引入了估计方法,以ITDM为代表的利用脉冲响应包括对脉冲激励的响应和脉冲响应函数)识别模态参数的识别方法还引入了噪声模态     

A noncoherent adaptive detection technique

An adaptive detection technique suitable for both stationary and nonstationary noise environments based upon a generalized likelihood ratio test (GLRT) formulation is presented. The detector, which is statistically equivalent to a special form of the Wilks's lambda test, noncoherently combines the information contained in a pulse train of arbitrary length for decision-making purposes. The probability density function of the test under the noise only hypothesis is shown to be central χ². Under the signal plus noise hypothesis, an exact statistical characterization of the test cannot be obtained, and, therefore, a Chernoff bound is derived. Results in terms of the probability of detection versus signal-to-noise ratio (SNR) obtained from Monte Carlo simulation, the Chernoff bound, and the optimal matched filter case are examined. The performance of the noncoherent detector is shown to be a function of the covariance matrix estimate and the number of data samples