不同粒径分布模拟月壤承压特性试验研究

月壤的承压特性决定月面巡视探测器的行驶阻力和沉陷,是影响月面可通过性的主要特征之一。为了得出不同粒径分布的模拟月壤在巡视器地面载荷和月面载荷下的承压特性,通过压板试验获取了3种不同粒径分布模拟月壤的承压性能曲线与参数。分析表明:粒径分布对模拟月壤承压性能影响大,粒径粗且分布均匀的JLU-1模拟月壤承压能力最强,其次为JLU-3模拟月壤,而粒径细且分布窄的JLU-2模拟月壤承压能力最弱;3种模拟月壤的变形指数在其他模拟月壤的范围内,松软状态时接近月壤值,在小载荷作用且松软状态时变形指数小于1;3种模拟月壤的内聚模量在其他模拟月壤的范围内,但大于月壤值;松软状态时3种模拟月壤的摩擦模量在其他模拟月壤的范围内,中密和密实状态下均大于月壤值。研究结果对月面探测器行走机构的仿真和路径规划具有参考意义。     

深空探测着陆器数字化设计及着陆性能影响因素

以对称分布四腿悬架式月球着陆器为研究对象,建立了着陆器软着陆过程六自由度动力学模型并改进了月壤摩擦系数模型;在以上动力学模型基础上,以月球着陆器为例编制了着陆器软着陆六自由度动力学分析程序,利用该程序分析了探测器全机月面软着陆性能,重点研究了动力学模型中的月面等效弹性系数、月面摩擦系数和月面倾斜角度等参数对探测器着陆性能的影响。研究表明上述影响因素对着陆器着陆缓冲性能影响显著,通过对以上参数的合理选择可以有效缓解月球探测器月面软着陆的着陆冲击过载。     

Multi-state autonomous drilling for lunar exploration

Due to the lack of information of subsurface lunar regolith stratification which varies along depth, the drilling device may encounter lunar soil and lunar rock randomly in the drilling process. To meet the load safety requirements of unmanned sampling mission under limited orbital resources, the control strategy of autonomous drilling should adapt to the indeterminable lunar environments. Based on the analysis of two types of typical drilling media (i.e., lunar soil and lunar rock), this paper proposes a multi-state control strategy for autonomous lunar drilling. To represent the working circumstances in the lunar subsurface and reduce the complexity of the control algo-rithm, lunar drilling process was categorized into three drilling states:the interface detection, initi-ation of drilling parameters for recognition and drilling medium recognition. Support vector machine (SVM) and continuous wavelet transform were employed for the online recognition of dril-ling media and interface, respectively. Finite state machine was utilized to control the transition among different drilling states. To verify the effectiveness of the multi-state control strategy, drilling experiments were implemented with multi-layered drilling media constructed by lunar soil simulant and lunar rock simulant. The results reveal that the multi-state control method is capable of detect-ing drilling state variation and adjusting drilling parameters timely under vibration interferences. The multi-state control method provides a feasible reference for the control of extraterrestrial autonomous drilling.     

Synthesis and characterization of geopolymer from lunar regolith simulant based on natural volcanic scoria

In this study, a new GVS（Ground Volcanic Scoria） lunar regolith simulant was produced. The similarity between GVS and lunar soil was proved by comparison with Apollo lunar soil samples and other commercial lunar soil simulants. Then, GVS lunar regolith simulant was investigated as the source material for preparing geopolymer to produce building material for lunar colony construction. To study the possibility of preparing geopolymer from GVS lunar regolith simulant and the optimum activator formu...     

月球重力场及低轨环月卫星轨道保持仿真分析

为了在满足精度要求的前提下节省月球重力场模型的计算时间,依据Kaula准则分析了目前国际上公认的最精确的两个重力场模型GLGM-2和LP165P,提出了在一定阶次截断重力场模型的问题.通过仿真不同阶次重力场模型作用下轨道高度为50 km的圆形极轨道环月卫星轨道特征的变化,验证了50 km以上高度卫星非球形摄动分析时可以将重力场模型截断至一定阶次的结论,并利用截断至70阶次的重力场模型仿真分析200 km圆轨道卫星一年内轨道下降程度.最后在仿真结果的基础上得到了200 km高度环月卫星需要每50天进行一次轨道保持控制的结论并完成一次轨道保持控制仿真.研究结论可以为我国低轨环月卫星轨道保持提供参考.     

新一代载人月面着陆器发展趋势研究

月面着陆器是实现载人探月任务的重要组成部分,从任务规划和着陆器参数两个方面对早期美国阿波罗计划中的月面着陆器（ LM）、苏联N1-L3登月计划中的月面着陆器（ L3登月系统）以及最近美国星座计划中的月面着陆器（ Altair）的相关情况进行了分析,并从任务需求、月面环境和研究经费及基础设施方面对LM与Altair月面着陆器进行详细比较,通过比较分析总结出新一代载人月面着陆器将沿着提高乘员运送能力、扩大到达范围、延长航天员生活时间及功能模块化的方向发展,并提出研制新一代月面着陆器应着重解决着陆器推进、结构、着陆障碍检测及缓冲以及月尘防护等关键技术。     

月球着陆器软着陆状态跳跃半主动控制

 将磁流变阻尼器应用到月球着陆器着陆机构中,进行减震与缓冲。考虑到着陆初始姿态角的不定和月面斜角的未知,建立起着陆器软着陆动力学模型。基于磁流变液在高速流与长冲程时的阻尼特性,分析了磁流变阻尼器的力学特性。应用安全角面的概念定义安全着陆所要求的着陆初始姿态角与月面斜角之间的关系,建立状态跳跃控制策略,实现软着陆半主动控制。通过与某型被动控制的着陆器进行对比分析,研究了半主动控制。研究结果表明：当允许的最大加速度响应不超过8g时,磁流变半主动状态跳跃控制的安全角面为理想安全角面的0.977 4,是被动控制安全角面的4.2倍,最大加速度变化的相对标准差为被动控制的0.59;而且当着陆初始姿态角以及月面斜角很大时,月球着陆器姿态角变化少,保证月球着陆器平稳着陆。     

月球与深空探测频率规划研究

介绍国际电（ITU）和空间频率协调组（SFGC）关于月球与深空探测频率使用的一些规定和建议,研究国外月球与深空探测频率使用规划和发展趋势,探讨我国月球与深空探测频率使用需求,提出我国月球与深空探测频率建议和发展方向。     

模拟月壤对蓝细菌生长特性的影响

阐明地球生物在月球环境中的适应性是未来月球探索和基地构建所面临的重要课题,为此以蓝细菌为实验材料,对其在模拟月壤cas-1中的生长状态进行了研究,从生长速率、细胞形态、细胞色素含量等方面表征了月壤对蓝细菌适应性的影响。实验结果表明,四种实验蓝细菌的生长能够适应模拟月壤的影响,其生长速率在模拟月壤处理中保持与常规培养基相似的生长曲线;模拟月壤颗粒上附着生长的菌体形态与对照相比无明显变化;模拟月壤处理后的菌体内色素含量与对照条件下培养的结果无显著差异。该结果对于未来开发月壤资源和构建月球基地受控生态生保系统具有重要意义。     

月球探测卫星的轨道支持

主要讨论采用月球卫星的探测方式时，月球探测器对测控系统的轨道支持要求和实现手段。重点对月球卫星转移轨道段的轨道测量和确定方法进行研究，利用仿真的地面站的测距和测角资料进行了定轨误差分析。     

Comparative study of lunar mission requirements and onboard propulsion system performance

In recent years, the lunar explorer programs, suspended for a long time, have resumed again with the rapid development of low cost and high-level technologies. As a result, several nations have made a success of lunar exploration programs with their own orbiters. Unlike a satellite orbiting the earth, the optimal design of an onboard propulsion system of a lunar orbiter is a major issue because it is not simple to make the orbiter arrive accurately at another planet far from the earth. Hence, a close attention is required to select and develop an appropriate type of the onboard propulsion system based on given mission requirements of a lunar orbiter. To do this, this study first surveys several lunar orbiters launched since 1990 and their major mission requirements. Then, it summarizes the technical trends of the onboard propulsion systems of the recent lunar orbiters and their key design and performance specifications through trade-off studies. By comparing these features, the present study investigates which lunar mission requirements are critically important, and how they can effect on the overall performance of an onboard propulsion system. Based on these investigations the major objective of the present study intends ultimately to set up a fundamental baseline in selecting and developing an appropriate type of onboard propulsion system of a lunar orbiter.     

影响环月飞行器定轨精度的误差源分析

以我国正在实施的探月计划“嫦娥1号”工程为背案,在现有测控网分布、观测弧段以及尽可能接近真实情况的误差源等前提下,利用仿真模拟的方法对影响环月飞行器定轨精度的误差源进行了初步探讨和分析。重点考察了月球重力场误差、观测量精度、初始时刻的先验轨道误差以及观测资料类型等对环月飞行器定轨精度的影响。     

月球巡视探测器自主定向算法研究

月球巡视探测器自主导航是其能在月面执行探测任务的关键,而定向又是月球巡视探测器自主导航的一个重要组成部分,其定向精度将直接影响到月球巡视探测器定位性能。将CCD(ChargeCoupleDevice)太阳敏感器应用到月球巡视探测器上,用太阳敏感器测量太阳位置矢量,结合加速度计测量的重力矢量,利用QUEST算法推算了月球巡视探测器的姿态和航向,为月球巡视探测器构建了一套适用于长时间、长距离导航的绝对定向方案,通过理论分析和实际推算描述了该定向方案的具体实现过程,最后以仿真结果验证了该方案的可行性,为下一步月球巡视探测器定位研究提供了技术参考。     

Noble Gas Isotopes on the Moon

We discuss some of the major noble gas components on the Moon and their implications on the history of Moon and Sun. He, Ar, and Rn have been detected in the tenuous lunar atmosphere. The Ar and Rn abundances suggest that a sizeable fraction of the lunar interior presently loses all its freshly produced radiogenic noble gases. Part of the radiogenic Ar and Xe (the latter from now extinct radioactive isotopes of I and Pu) outgassed from the lunar interior later became retrapped in the dust grains on the lunar surface. These “parentless” gases may also be used to constrain the degassing history of the Moon, although a quantitative understanding is lacking. The dust layer on the lunar surface contains large amounts of noble gases implanted by the solar wind. The lunar regolith therefore constitutes the best available archive of the solar history of the past four billion years. This revised version was published online in August 2006 with corrections to the Cover Date.     

月面特征稀疏环境下的视觉惯性SLAM方法

月球车在执行科学探测任务过程中,其自身的高精度定位是一项亟需解决的关键问题。针对在特征稀疏的月面环境下的定位问题,提出一种视觉惯性融合的SLAM方法,将视觉测量与惯性传感器的信息利用位姿图优化方法融合,实现高精度的联合定位。针对特征稀疏环境下的前端视觉数据关联误差较大的问题,提出了一种基于四元树的光流跟踪算法,能够有效地跟踪鲁棒的特征点,提升了关键帧之间相对位姿估计的准确性。并且针对月面环境特有的恒星无穷远点干扰问题,提出一种高效的恒星点剔除算法,能够有效改善无穷远点导致的定位精度下降的问题。搭建了一套模拟月面环境的计算机仿真系统,并构建了多个月面环境视觉惯性SLAM仿真数据集,在不同的模拟月面场景下进行定位性能仿真验证,仿真测试结果表明本文算法的鲁棒性更强,具有更高的定位准确度。     

Analysis of Chang’e-5 lunar core drilling process

Chang’e-5 explorer successfully acquired lunar regolith core samples from depths of greater than 1 m of lunar surface. This study analyzed the lunar core drilling process based on the telemetry data, image information, and returned samples to optimize the sampling device design and enhance the understanding of the lunar regolith. In particular, a prediction method for the projected drilling path and local terrain fitting of drilling dip angle was proposed based on the flight events recorded during the core drilling process and the image information acquired before, during, and after sampling. The results revealed that the drilling dip angle of Chang’e-5 was approximately 2.3°, and the deviation of the drilling length and depth was less than 2 mm. For continuous drilling, a fusion method based on telemetry data and image information was applied to determine the demarcation point of drilling with and without the lunar soil. The position of the demarcation point implied that the drilling point remained at approximately 6 mm loose soil, thereby lagging the action of the force response. Additionally, a characteristic parameter comparison method was proposed for the lunar and ground drilling to analyze the status of the lunar soil. Furthermore, the analysis results revealed that the majority of the Chang’e-5 drilling samples were derived from 0–73.8 cm below the lunar surface and few samples were extracted below 73.8 cm, as the drilling encountered several rocky regions. Moreover, the drilling point exhibited two prominent stratification variations at ～28.7 cm and ～70 cm below the lunar surface. Ultimately, the preliminary relationship between sample dissected position in soft tube and drilling displacement was analyzed. The segmented estimation results can support research on subsurface lunar soil.     

月面巡视机器人快速安全路径规划

为提高月面巡视机器人自主探测任务的效率及安全性,提出了一种基于月面数字高程地图的大范围自主探测快速安全路径规划算法。首先根据获取的月面数字高程地图设计了一种地形可通过性分析方法,并生成了欧几里得距离地图（EDM）为安全路径规划提供参考。然后针对A^*算法解决月面巡视探测问题时搜索速度慢、未考虑路径安全性的问题,提出了FSA^*算法,改进了A^*算法的搜索机制以适用于月面大范围路径的快速搜索,并结合EDM地图设计了一种安全启发式函数,可使生成路径尽量远离危险区域,提高了巡视机器人自主探测过程的安全性。最后选取月球艾特肯盆地区域作为仿真场景,验证了该算法的有效性。     

Overloading of Landing Based on the Deformation of the Lunar Lander

Along with the progress of sciences and technologies, a lot of explorations are taken in many countries or organizations in succession. Lunar, the natural satellite of the earth, become a focus of the space discovery again recently because of its abundant resource and high value in use. Lunar exploration is also one of the most important projects in China. A primary objective of the probe in lunar is to soft-land a manned spacecraft on the lunar surface. The soft-landing system is the key composition of the lunar lander. In the overall design of lunar lander, the analysis of touchdown dynamics during landing stage is an important work. The rigid-flexible coupling dynamics of a system with flexible cantilevers attached to the main lander is analyzed. The equations are derived from the subsystem method. Results show that the deformations of cantilevers have considerable effect on the overloading of the lunar lander system.     

Studying the Lunar Ionosphere with SELENE Radio Science Experiment

Radio occultation observations of the electron density near the lunar surface were conducted during the SELENE (Kaguya) mission using the Vstar and Rstar sub-satellites. Previous radio occultation measurements conducted in the Soviet lunar missions have indicated the existence of an ionosphere with peak densities of several hundreds of electrons per cubic centimeters above the dayside lunar surface. These densities are difficult to explain theoretically when the removal of plasma by the solar wind is considered, and thus the generation mechanism of the lunar ionosphere is a major issue, with even the validity of previous observations still under debate. The most serious error source in the measurement is the fluctuation of the terrestrial ionosphere which also exists along the ray path. To cope with this difficulty, about 400 observations were conducted using Vstar to enable statistical analysis of the weak signal of the lunar ionosphere. Another method is to utilize Vstar and Rstar with the second one being used to measure the terrestrial ionosphere contribution. The observations will establish the morphology of the lunar ionosphere and will reveal its relationship with various conditions to provide possible clues to the mechanism.