重力梯度力矩引起的自旋稳定卫星姿态摄动

建立了自旋稳定卫星姿态摄动的数值分析方法及模型,对重力梯度力矩作用下自旋卫星自旋轴相对于地心惯性系进动和章动以及赤经和赤纬的变化进行了仿真分析。对重力梯度力矩引起的自旋稳定卫星姿态摄动的演化规律进行了研究。指出在重力梯度力矩的作用下：自旋轴指向绕轨道面法线进动;章动角速度远小于进动角速度;轨道角速度越大,星体相对于地心惯性系的进动角速度和章动角速度越大,赤经和赤纬的变化率越大;自旋角速度越大,星体相对于地心惯性系的进动角速度和章动角速度越小,赤经和赤纬的变化率越小。     

绳系网捕系统的定位与测姿方法研究

基于双目视觉原理,建立了空间目标的三维坐标计算模型,利用安装在捕获端的摄像头对主星进行观测,建立了捕获端定姿方法.仿真算例验证了所提方法能够以较高的测量精度实现定位和测姿,可以满足绳系卫星捕获端的姿态确定精度需求.     

基于Galerkin法的柔性绳系辅助返回系统的展开动力学建模与分析

以大型空间绳系辅助返回系统为背景,利用微元法和拉格朗日方程建立有分布质量的柔性绳系辅助返回系统的展开动力学模型.针对模型复杂的非线性和强耦合问题,采用Galerkin法进行离散化处理以求解;引入经典的珠子模型,以验证Galerkin法解的准确性;最后通过数学仿真来验证和分析Galerkin法解的正确性和收敛性,并对绳系...     

欠驱动直连式三体绳系卫星非线性姿态跟踪控制

针对存在外部有界干扰和控制饱和的欠驱动直连式三体旋转绳系卫星系统姿态跟踪控制问题,提出了一种分布式非线性控制方法。首先考虑单体欠驱动绳系卫星姿态模型,由于其复杂的非完整动力学特性,应用微分同胚映射的方法先将模型进行转换,进一步基于反步法设计了欠驱动姿态跟踪滑模控制器,并结合抗饱和方法解决了控制受限的问题。然后应用Lyapunov稳定性定理证明了其闭环系统的一致最终有界性。进一步考虑绳系卫星系统的运动同步性,将欠驱动单体绳系卫星姿态控制器设计扩展至直连式三体绳系卫星姿态系统,设计了分布式欠驱动非线性控制器。最后进行了数学仿真,验证了本文所设计控制方法的有效性。     

卡尔曼滤波在自旋卫星章动控制中的应用

细长体结构卫星的自旋运动是不稳定的,章动有发散趋势,须进行实时的章动监视,且章动角的测量值包含有误差.通过引入一个离散控制过程的系统,介绍了卡尔曼滤波器的基本原理,建立了自旋卫星自旋运动简化的动力学模型,给出了运动方程和观测方程,详细地推导了适用于自旋卫星章动控制的卡尔曼滤波处理过程,利用该模型对某自旋卫星章动进行仿真计算,并对姿态章动联合控制和应急章动控制情况下的章动控制应用情况进行分析,得出结论：基于卡尔曼滤波的卫星章动角计算的方法正确、结果准确.     

低速风洞飞行器模型编队飞行绳系并联支撑机构

设计了一种用于飞行器双机编队飞行的风洞试验模型绳系并联支撑机构，模拟在周边有障碍物的有限空间通道中的飞行运动。以直升机为例，根据工况参数设计了双绳牵引并联机构作为飞行器模型的支撑，建立了基于可移动的滑轮铰点与直升机模型编队协同飞行的运动学模型，对系统的静刚度进行了分析，并通过试验验证了旋翼转动对该绳系支撑系统动刚度的影响，给出了在有限空间通道中模拟双机编队飞行与着陆过程中绳与绳之间、绳与模型之间的干涉算法，并对该支撑机构的绳系结构进行了干涉分析。结果表明，所设计的支撑机构能有效解决模拟飞行器模型双机编队在有限空间中飞行运动时的支撑干涉问题，而且系统刚度达到低速风洞试验的稳定性要求，是低速风洞中支撑飞行器模型进行编队飞行试验的有效解决方案。     

无人机-无人车异构时变编队控制与扰动抑制

研究了无人机-无人车异构系统时变输出编队控制与扰动抑制问题，要求多无人机与无人车在受到未知外部扰动的情况下，保持设计的输出时变编队构型。首先，对无人机与无人车进行单体运动学与动力学建模，同时建立扰动模型，并引入代数图论概念，建立异构集群系统的协同控制模型。然后，对各无人机-无人车设计了具有分层架构的分布式时变输出编队控制器，包含基于一致性理论的编队中心估计项和基于内模原理的扰动抑制补偿项。进一步分析异构系统实现输出时变编队的可行性条件，给出了分布式编队控制器的参数选取算法，并证明了时变编队控制器构成的闭环系统的稳定性。最后，通过仿真算例来验证所设计的编队控制器的有效性。     

三维动态势函数下编队UAV飞行算法研究

针对三维动态环境下编队无人机(UAV)的路径规划和队形保持问题,提出了基于改进三维动态势函数与约束动力学的编队UAV飞行算法。首先,建立了改进的动态三维人工势函数模型;针对编队UAV的队形保持和重组,通过引入拉格朗日乘子建立了含队形约束的编队UAV约束动力学方程组。仿真结果表明,所提算法在三维动态环境下可有效地进行编队UAV的路径规划、队形保持与重组。     

电动力绳系离轨系统电流与拉力混合展开控制

电动力绳系离轨系统是一种典型的空间碎片主动消除技术,本文针对电动力绳离轨系统在初始阶段展开的控制问题,仅通过调节有限的系绳张力与电流,不依赖其他推进器,将导电系绳释放至期望长度并抑制系绳的摆动。首先,采用倾斜偶极子地磁场模型,建立考虑系绳质量的近地轨道二体电动力绳系卫星系统动力学模型;其次,在系绳张力与电流存在约束的条件下,采用反步法结合抗饱和辅助函数解决控制输入受限问题,并引入动态尺度广义逆实现了欠驱动电动力绳系统展开稳定控制问题;然后,应用Lyapunov稳定性定理证明了其闭环系统的稳定性;最后,在MATLAB/SIMULINK平台上进行了仿真验证。结果表明：通过调节系绳张力与电流,可以将系绳释放到指定位置,同时控制输入满足约束条件。     

考虑避免碰撞的编队卫星自适应协同控制

基于势函数法研究具有模型不确定性的编队飞行卫星避免碰撞的自适应协同控制.势函数法的思想为设计碰撞区域势函数值较大,所设计的控制律使得系统势函数具有减小的趋势,从而实现避免碰撞的编队飞行任务.首先,在无外部参考轨迹的情况下,通过引入避免碰撞势函数,提出一种自适应协同控制器,编队卫星最终实现速度一致和避免碰撞.进一步,考虑已知外部参考轨迹的情形,基于新的势函数方法,设计新的自适应协同控制器,能够同时实现避免碰撞、速度一致、卫星跟踪参考轨迹的目的.对于所提出的两种控制方法,均通过合理地应用Lyapunov稳定性理论分析了闭环系统的稳定性.仿真结果表明了所设计控制方法的有效性.     

一种面向航空集群的集中控制式网络部署方法

软件定义网络（SDN）的发展为机载网络构建提供了全新的设计思想。针对航空集群环境下控制平面的可扩展性问题,研究了混合层次式架构下的多控制器部署问题。首先,为实现对底层传输节点的弹性管控,通过扩展控制层级定义了本地控制器资源池。然后,为减少时间复杂度,实现本地控制器的快速部署,将传统的多控制器直接部署转化为子域划分和域内部署两个步骤,提出了基于节点密度排序的子域划分算法和基于改进多目标模拟退火的域内控制器部署算法。实验结果表明：与已有算法相比,所提算法在保证控制器的负载均衡基础上,可以有效减少网络控制链路的平均时延和平均失连率,同时时间复杂度更低,能够适用于大规模及动态网络环境下的控制器部署场景。     

Optimization of the tether-assisted return mission of a guided re-entry capsule

This paper presents the mission analysis of a tether-assisted payload retrieval from the International Space Station (ISS). The objective is to assess all relevant phases of such a mission in order to allow a comparison with a conventional mission employing a propulsive deorbitation. The controlled tether deployment procedure and the guided return flight of the released re-entry capsule are optimized. A preferable deployment strategy is identified that allows for favorable entry conditions and low flight loads. The optimal deployment trajectories serve as a basis for an optimal dynamic regulator. This approach is extended towards an adaptive concept, where artificial neural networks are applied to deployment control. For the guidance of the capsule a predictive concept is proposed that is based on the optimal re-entry trajectories identified previously. By applying these concepts, the attainable landing accuracy during return amounts to an average of 5 km, and the application of the tether system exhibits overall system mass advantages. This demonstrates that the tether-assisted return mission is a competitive alternative.     

Application of stress wave theory for pyroshock isolation at spacecraft-rocket interface

A large number of pyroshock devices are employed in spacecraft and rockets to realize stage separation and appendage deployment. Release of pyroshock devices induces high-level transient shock responses which tend to cause fatal damages in electronic equipment made of crystals and brittle materials. This paper aims to provide methods to isolate pyroshock and guarantee the safety of such equipment against high-frequency shocks. Firstly, stress wave transmission mechanism in stepped rods is investigated, upon which optimal area rate for shock isolation is achieved. Then, two spacecraft-rocket interface structures for pyroshock isolation, namely isolation hole and interim segment, are proposed. Both numerical simulations and experiments are carried out to validate the two shock isolation strategies. It is revealed that the interim segment structure shows better pyroshock isolation performance at the cost of increasing the weight of launching system whereas isolation hole is an optimal choice to reduce pyroshock response without causing weight increase.     

Deployment dynamic analysis of deployable antennas considering thermal effect

Dynamic analysis of flexible multibody systems is complex. Several successful methods have been demonstrated. However, few works discussed the dynamic performance of the flexible multibody under different temperatures. This paper uses the absolute nodal coordinate formulation to analyze the flexible body dynamics of deployment structures under different temperatures to simulate space environments. The dynamic equations of finite element in temperature field are developed. Then a computer-aided simulation of flexible multibody systems in temperature field is implemented. A general four-bar mechanism under different temperatures as a simulation example is demonstrated, and the deployment characteristics of a special four-bar mechanism as a basic module of the hoop truss deployable antenna is analyzed under different temperatures in order to evaluate the dynamic performance of the deployable antenna in space environments. The simulation results indicate the influence factors of deployment dynamic characteristics include the structural form, material properties, geometric parameters and deployment planning in ambient and thermal/vacuum environments.     

带有中心钝体的固体燃料冲压发动机工作性能分析

为提高固体燃料冲压发动机的燃烧特性和工作性能,提出了带有中心钝体的固体燃料冲压发动机方案,基于雷诺转捩和涡概念耗散方程建立了其湍流燃烧模型,并数值计算分析了其内流场、燃面退移速率、推力与总压损失。结果表明：带有中心钝体的冲压发动机内部流动过程较为复杂,钝体后部有四个漩涡,增强了发动机内来流空气与燃气的掺混;钝体孔隙中的高速气流与两侧的小尺度漩涡保证了钝体尾涡的稳定性;与普通固体燃料冲压发动机相比,在燃烧室中增加中心钝体能增大燃烧室内高温区面积,提高补燃室内温度,可使推进剂平均燃面退移速率提高26.11%,发动机推力提高22.12%,燃烧效率提高8.9%。     

Multisensor resource deployment using posterior Cramer-Rao bounds

The development of a general framework for the systematic management of multiple sensors in target tracking in the presence of clutter is described. The basis of the technique is to quantify, and subsequently control, the accuracy of target state estimation. The posterior Cramer-Rao lower bound (PCRLB) provides the means of achieving this aim by enabling us to determine a bound on the performance of all unbiased estimators of the unknown target state. The general approach is then to use optimization techniques to control the measurement process in order to achieve accurate target state estimation. We are concerned primarily with the deployment and utilization of limited sensor resources. We also allow for measurement origin uncertainty, with sensor measurements either target-generated or false alarms. An example in which the aim is to track a submarine by deploying a series of constant false-alarm rate passive sonobuoys is presented. We show that by making some standard assumptions, the effect of the measurement origin uncertainty can be expressed as a state-dependent information reduction factor which can be calculated off-line. This enables the Fisher information matrix (FIM) to be calculated quickly, allowing Cramer-Rao bounds to be utilized for real-time, dynamic sensor management. The sensor management framework is shown to determine deployment strategies that enable the target to be accurately localized, and at the same time efficiently utilize the limited sensor resources.     

Deployment dynamics for flexible deployable primary mirror of space telescope with paraboloidal and laminated structure by using absolute node coordinate method

A nonlinear dynamic modeling method for primary mirror of Flower-like Deployable Space Telescope (F-DST) undergoing large deployment motion is proposed in this paper. To ensure pointing accuracy and attitude stability of the paraboloidal primary mirror, the mirror is discretized into equal thickness shell elements by considering shell curvature. And the material nonlinear constitutive relation of flexible mirror is acquired using Absolute Nodal Coordinate Formulation (ANCF). Furthermore, the primary mirror of F-DST can be regarded as a clustered multi-body system, and its dynamic equations of elastic deformation and deployment motion are established by virtual work principle. Finally, the deployment motion of primary mirror by different driving conditions are simulated, the results show that the vibrations of mirrors that driven by elastic hinge device are more than that driven by servo motor. In addition, single sub-mirror deployment process will perturb the pointing accuracy of primary mirror, and the multiple sub-mirrors simultaneously deploying will seriously affect all the sub-mirrors surface accuracy because of the coupling effect. Thus, there are theoretical value and practical significance for the controlling surface accuracy and attitude accuracy of space telescope.     

Near-Field Seismic Propagation and Coupling Through Mars’ Regolith: Implications for the InSight Mission

NASA’s InSight Mission will deploy two three-component seismometers on Mars in 2018. These short period and very broadband seismometers will be mounted on a three-legged levelling system, which will sit directly on the sandy regolith some 2–3 meters from the lander. Although the deployment will be covered by a wind and thermal shield, atmospheric noise is still expected to couple to the seismometers through the regolith. Seismic activity on Mars is expected to be significantly lower than on Earth, so a characterisation of the extent of coupling to noise and seismic signals is an important step towards maximising scientific return.In this study, we conduct field testing on a simplified model of the seismometer assembly. We constrain the transfer function between the wind and thermal shield and tripod-mounted seismometers over a range of frequencies (1–40 Hz) relevant to the deployment on Mars. At 1–20 Hz the displacement amplitude ratio is approximately constant, with a value that depends on the site (0.03–0.06). The value of the ratio in this range is 25–50% of the value expected from the deformation of a homogeneous isotropic elastic halfspace. At 20–40 Hz, the ratio increases as a result of resonance between the tripod mass and regolith. We predict that mounting the InSight instruments on a tripod will not adversely affect the recorded amplitudes of vertical seismic energy, although particle motions will be more complex than observed in recordings generated by more conventional buried deployments. Higher frequency signals will be amplified by tripod-regolith resonance, probably reaching peak-amplification at \(\sim 50\) Hz. The tripod deployment will lose sensitivity at frequencies \(>50\) Hz as a result of the tripod mass and compliant regolith.We also investigate the attenuation of seismic energy within the shallow regolith covering the range of seismometer deployment distances. The amplitude of surface displacement decays as \(r^{-n}\), where \(1.5 < n < 2\). This exceeds the value expected for a homogeneous isotropic elastic halfspace (\(n \sim 1\)), and reflects an increase in Young’s modulus with depth. We present an updated model of lander noise which takes this enhanced attenuation into account.     

空气辅助缸内直喷发动机正时控制策略

针对某型空气辅助缸内直喷发动机,设计了曲轴位置传感器,研制了发动机的电子控制单元(electronic control unit,ECU).在此基础上,着重研究了空气辅助缸内直喷发动机的正时控制策略,包括软件正时、空气辅助喷油正时和点火正时.为了实现发动机正时的精确控制,提出了"数齿延时"控制方法.仿真试验和台架试验表明:基于自开发电子控制单元的空气辅助缸内直喷发动机正时控制策略准确可行.